km kesmak used for sale

Key data: 3000 kN, 679 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900C2 Year of Make: 2005 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 754 cm³ Moulded part weight: 679 g/hp Control: MC5 Equipment: 2 pcs core train Interface Robot Cavity pressure measurement 24-fold hot zone channel control Interface temperature control unit Approx. 76,000 operating hours

Key data: 3000 kN

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Key data: 5000 kN, 2 g/PS, 90 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

SINMAG KM25 Spiral kneading machine used Year of manufacture 2014 from plant closure two speeds, three gears (first gear reversible as mixed gear) Kettle, spiral and dough crusher made of stainless steel not tinkered with Machine in very good condition Machine can be controlled digitally and optionally also operated analogue via the side switch Three clocks for mixing and both kneading speeds Boiler with clockwise and counterclockwise rotation Machine must be thoroughly cleaned before use Video about test run available

Key data: 650 mm, 140 , 35

Screw diameter: 35 mm Displacement: 154 cm³ Injection weight in polystyrene: 140 g/hp Injection pressure: 2,429 bar Clamping force: 65 t Tool installation height min.: 250 mm Opening distance: 500 mm CONTROL: MC6 Screen text: german / german Operating instructions: german / german Core cables: 1 Pump drive power: 15kW Total connected load: 32.0 kW Total weight: 3,900 kg Dimensions L x W x H: 4.0 x 1.6 x 2.1 m Payment terms: 100% before taking over the machine, net only

Key data: 1600 mm, 228 , 40

Screw diameter: 40 mm Stroke volume: 251 cm³ Injection weight in polystyrene: 228 g/hp Injection pressure: 2,500 bar Clamping force: 160 t Tool installation height min.: 300 mm Opening distance: 650 mm CONTROL: MC5 Screen text: german / german Operating instructions: german / german Core pulls: 2 incl. LRX100 robot integrated, x-550mm, y-1.200mm, z-1.500mm, c-90°, 2xGripper, 2xvacuum Pump drive power: 22kW Total connected load: 37.7 kW Total weight: 8,200 kg Dimensions L x W x H: 5.0 x 1.7 x 2.2 m Payment terms: 100 % before taking over the machine, net only

This 7-axis KMT Speedmaster 104260-H was manufactured in 2001. It features a spindle speed of 8,000 rpm, chuck size of 20 mm, and bar capacity of 20 mm. The machine includes two turrets, each holding 8 tools, and is compatible with steel and aluminum. Consider the opportunity to buy this KMT Speedmaster 104260-H swiss type turning machine. Contact us for more information.

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Krauss Maffei KME 45 XS was manufactured in 2016. It features a 45 mm screw diameter, high-performance single screw with a 36:1 L/D ratio, and operates at speeds up to 120 rpm. Designed for high-pressure extrusion, it handles thermoplastics and compounds with a throughput of 150-300 kg/h. Consider the opportunity to buy this Krauss Maffei KME 45 XS single screw extruder. Contact us for more information about this machine.

A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.

Gallus KMS 510 Unwind, E+L Web Guide, Teknek Web Cleaner, Arcotec Corona Treater, Infeed Tension Unit, 9 x Servo Flexo Units, Multi stream hot foil unit, Turning Tower Lamination Unit, GEW UV System, Chill Rolls, Waste matrix tower Rotary die cutting/embossing unit Register Control, Sensotec Web Inspection System AVT Video Control BST Chiller HYFRA Print cylinder 116 Anilox 29 Gallus FSM 510, 20" Flatbed Diecutters Web decurling unit two decurlers, one on the press and one on the die cutter Windowing/Stripping unit Belt delivery unit many accessories

General SKU366W1604 LocationBarneveld CEcheck Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume4500 Ltr. Motor1.1 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408, Stainless steel 1.4571 (316Ti) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity4,5 m3/h With motor1,1 kW(400 V, 1400 rpm(Ex)) Information MakeDickow Pumpen KG TypeKMBh 26/210 Mach.No.PB 98164669 Mounted on framecheck Floorspace0,4 x 0,6 m Total height0,6 m Weight150 kgCentrifugal PumpsDickowPumps > Centrifugal PumpsBrand > Dickow What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 40000 , 8100 , 130

KRAUSS MAFFEI KM4000 - 19000 MC Clamping force: 4000 T / 40000 KN Year : 1998 Screw diameter : 130 mm Injectable volume : 8100 gr Distance between tie bar : 2240 x 1800 mm Platen dimensions : 3340 x 2940 mm Min / max mold thickness: 1100 / 2000 mm Opening stroke: 4200 mm Stroke of the ejection unit : 350 mm Weight : 255 T   + KUKA robot

â Product description âœ"Manufacturer: KÖVY âœ"Type : KM4 Head machine Fortuna âœ"Manufacturer: Edmund Schröder âœ"Type : Fortuna KM âœ" 4 rows âœ"Condition: used âœ"We have 2 pieces in stock Details see picture

A counter-rotating side-feed twin-screw extruder Krauss Maffei used in the coextrusion process is available. Screw diameter: 40mm, material: rigid PVC, screw speed: 50rpm, throughput capacity: approx. 50-80kg/h, operating hours: approx. 42100h. Including roller guide with subframe. Documentation available. An on-site inspection is possible.

Three-phase motor with 2 speeds, electric motor -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg

Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Model: KMRS-200 Year: 2016 Condition: Used Serial Number: 17508-001 Stock Number: 2969 Capacity: 700 pc/h Belt width: 325 mm Diameter cutting ring; 270 mm CIP unit hot water min. 60 degrees Celsius Compressed air:5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Multi-spindle head, multi-spindle drill head, drilling gear - Joint multi-spindle head -max.: x drill -3x built-in drill collet: mm -min. Distance drill: mm -Weight: 11.3 kg -Articulated multi-spindle heads are variable tools: for various machining operations such as drilling, thread cutting, ountersinking, reaming, milling, turning, with which several holes can be machined at once.

Multi-spindle head, multi-spindle drill head, drilling gear -Joint multi-spindle head -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Geared motor, electric motor, electric geared motor -Speed: 50 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 28 mm -Protection class: IP 54 -Outer flange: Ø 160 mm -Recess: Ø 110 mm -Price: per piece -Quantity: 2 available -Dimensions: 405/160/H215 mm -Weight: 14.2 kg

Geared motor, electric motor, electric geared motor -Manufacturer: VEM, Geared motor type ZG3 KMRA 80 G 6 -Speed: 31.5 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Number: 1x motor available -Price: per piece -Dimensions: 485/205/H235 mm -Weight: 25 kg/pc.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 -Power: 11 kW -Speed: 1440 rpm -Voltage: 380 V -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 2x motors available -Price: per piece -Dimensions: 525/288/H330 mm -Weight: 88 kg/unit

Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker EJE-KmS -Type: MP 1510 C/3 -Mat no.: 50034882 -Voltage: 24V -Number: 3x control available, 1x with 2x without bracket -Price per piece -Dimensions: 330/215/H110mm / 240/190/H110mm -Weight: 5 kg/pc. / 3.9kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from order picking truck Jungheinrich type EJE-KmS -Hydraulic pump: type 0 542 015 145 -with: tank and control valve -Dimensions: 180/160/H370 mm -Weight: 11 kg

Chassis, electric motor, DC motor, drive motor, traction motor for order picking forklift -Manufacturer: Jungheinrich, chassis drive motor from order picking forklift type EJE-KmS -Drive motor: juli GF 104-Q3 24V 1.5 kW -Individual components: see photos -Wheel: 230 x 70 -Number: 2x chassis available -Price: per piece -Dimensions: 266/266/H610 mm -Weight: 62 kg/unit

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, fluid-switched multi-plate spring-loaded brake from the GSL aerial work platform -Bolt circle: Ø 160 mm M14 -Dimensions: see photos -universally applicable -Number: 2x brakes available -Price per piece -Dimensions: 220/190/H190 mm -Weight: 19kg/pcs

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller -Manufacturer: Jungheinrich, swivel wheel from electric pallet truck EJE-KmS 16G-24-140-56 -Wheel size: Ø 96 mm / 100/40-75 -Dimensions: see photos -Number: 2x support rollers available - Price: per piece -Dimensions: 250/120/H135 mm -Weight: 5 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type 0 542 015 145 -Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from pedestrian stacker type EJE-KmS 16G-24-140-56 -Drive motor: 24 VDC / 1.5 kW -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1585/510/H265 mm -Weight: 82 kg/pc.

Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST04-2K VBR 071-12 10B i= 45 -Adjustment gear: KMB-1100366 75 - 14 rpm -Spring-loaded brake: BFK458-08-N 8 Nm -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Dimensions: 410/280/H205mm -Weight: 17.8 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor type KMF80A8/2 -Power: 0.13/0.5 kW -Speed: 630/2710 rpm -Shaft: Ø 15.4 mm toothed -Design: B14 -Protection class: IP 54 -Dimensions: 390/156/H225 mm -Weight 17 kg

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-applied brake, multi-disc spring-applied brake -Manufacturer: Stromag, hydraulic disc spring-applied brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 2 brakes available -Price: per piece -Dimensions: 220/190 mm -Weight: 16 kg/piece

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

General SKU286T653 MakeLoedige LocationBarneveld TypeKM300D Main Features MaterialStainless steel Volume300 Ltr. Motor11 KW Specified Features - Powder turbo mixer Paddle mixercheck Continuous mixercheck Useful capacity100-210 Ltr. Inlet460x230 mm Manhole450x170 mm Outlet200x80 mm Glands air purgedcheck Motor11 kW 380-420/660-725 Volt Speed mixing shaft160 rpm Powder turbo mixers MaterialStainless steel Information No.11450 Year of construction1988 Mounted on framecheck Floor space3,2x1 m Total height1,5 m Weight1050 kgPowder turbo mixersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesOther chemicalStarchTea, herbs & coffeeGeneric medicinesPowdered foodsLoedigeMixers > Powder turbo mixersIndustries > Chemical > Catalysts & fillersIndust ...

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

General SKU340S836 LocationBarneveld MakeMorton Machine CO LTD Loedige (UK) TypeKM2000 4ZF No.M24232 Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Continuous mixercheck Capacity2000 ltr Useful capacity800-1400 ltr Trough sizesdia. 950x2950mm Inlet400x300mm Top connections300x200mm (2x), dia. 250mm (1x) Inspection hatch540x385mm (2x) Outlet620x220mm with gearbox 0,18 kW 240/410 volt 9,2 rpm Glands air purgedcheck Motor30 kW 400/690 Volt Speed mixing shaft117 rpm MaterialStainless steel 1.4301 (304) Information Year of construction1998 Floorspace4,6x1,9 M Total height1,3 M Weight2200 KgPowder turbo mixersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesOthe ...

Motor cable FESTO KMTR-BSM-50/63/80-x 165640 Length(x): 10 m New ! Dimensions: 430 x 430 x 60 mm

Zayer 30 KMU 10000 AR/E Moving Column CNC Milling Machine Moving column CNC milling machine with Siemens control, 9700 x 1200 mm table with magnetic clamping and complete body with full protection. Axis travel: - X: 8400 mm longitudinal - Y: 1260 mm transverse - Z: 1511 mm vertical Spindle: ISO 50 taper, 27 kW motor, maximum 3500 RPM. The machine is in daily use at our plant in Ametlla del Vallès and receives annual authorised maintenance. In 2023, spindle and support were replaced (invoice available, approx. €40,000). In good working order. Terms of sale: Disassembly, packing, handling and loading into a truck are at the buyer's expense. The machine has technical documentation, it is sold without tools/tools or spare parts . Withdrawal: Notice must be given with a minimum of 10 days or a week to coordinate the load. Means of loading provided by the se ...

Capacity: 230 × 120 mm Configuration : 5 shafts Jointer: 5 kW Right rotor: 7.5 kW Left rotor: 7.5 kW Planer: 7.5 kW Universal shaft: 5.5 kW Drive: 1.1 kW Speeds per inverter Digital up, down and planer shaft Digital left rotor SIKO mechanical digital counters on each axis movement + digital display on the board Helical tool holders with carbide inserts Tables: Inlet table 2,500 mm Suction: 4 × Ø 120 mm 1 × Ø 150 mm Machine dimensions: 3,900 × 1,450 × 1,540 mm Compliance: CE standard Special data: Integrated table lubrication insert Front drive roller jointer with manual retracting Motorized polyurethane roller at the outlet Safety: Protector: yes Auction-ID: A1-45443-72

CNC Control: SIEMENS 840 D Number of axes: 2 Max. turning diameter: 420 mm Max. turning length: 1000 mm X/Z axis strokes: 200 / 1000 mm Spindle bore: 82 mm Spindle speed: 0 – 3,000 rpm Spindle motor power: 14.5 kW Turret: VDI 40, 12 stations Chuck: Autoblok Ø 250 mm Tailstock: Chip Conveyor: Present Remarks: Machine in good working order. Weight (kg): approx. 5500 Year & Manufacturer: 2001 – MENTI Auction-ID: A1-44765-254

CNC Control: SIEMENS 840 D Number of axes: 2 Max. turning diameter: 420 mm Max. turning length: 1000 mm X/Z axis strokes: 200 / 1000 mm Spindle bore: 82 mm Spindle speed: 0 – 3,000 rpm Spindle motor power: 14.5 kW Turret: VDI 40, 12 stations Chuck: Autoblok Ø 250 mm Tailstock: Chip Conveyor: Present Remarks: Machine in good working order. Weight (kg): approx. 5500 Year & Manufacturer: 2001 – MENTI