km kesmak used for sale

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deze machine staat in opslag bij Plastima Used Machinery Blo Udevcqccs Dvycop

Socket line, plug -Type: KMF-1-24-2,5-LED -Number: 6x available -Price: per piece -Minimum purchase: complete -Weight: 0.17 kg/piece

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor type ZG2 KMR 80 K 4 -Speed: 80 rpm -Power: 1.1kW -Type: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimension: 500/200/H260 mm -Weight: 29 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 71 G 4-2 -Power: 0.55/0.7 kW -Speed: 1400/2840 rpm -Shaft: Ø 19 x 40 mm -Protection class: IP44 -Number: 1 piece available -Dimensions: 250/140/H180 mm -Weight: 11kg

Hydraulic copying device SAUTER type KMC 8001Copier turning device, copying turning device for lathesThe copying device comes from a lathe.Connections for oil supply and oil returnCopying stroke: approx. 140 mmRadial travel at 60 Construction: 120 mmRequired operating pressure: approx. 25 barOil volume flow: max. 7 litres/min. Drive power of the lathe: max. approx. 15 kWSpan cross-section: max. 3.5 mm²Copy carriage stroke: approx. 125 mmDistance of lathe chisel to the stylus: 800 mmDead weight Copier: approx. 100 kggoods

electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMO 56 K 4 -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 x 20 mm -Design: B5 -Dimensions: 150/119/H153 mm -Weight: 4.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ASUG VEM, geared motor -Transmission: ASUG type GWWN 1052 -Engine: VEM type KMR 56 K 4 -Power: 0.12 kW / 1360 rpm -Protection class: IP44 -Total dimensions: 290/135/H185 mm -Weight: 10 kg

Key data: 4230 mm, 2100 mm, 850 mm

X-axis: 4,230 mm Y-axis: 2,100 mm Z-axis: 850 mm CNC control: Heidenhain TNC 530 Spindle mount: ISO 50 Spindle speed: 6,000 rpm Tool changer: 30 places Table dimensions: 4,000 x 1,650 mm Stand spacing: 2,300 mm Equipped with: - Angle milling head - Touch probe button - Inner spindle cooling - Double chip conveyors - Cooling system -Operating instructions Country of origin: Taiwan Machine LxWxH: 9,000 x 3,500 x 4,000 mm +/- Machine weight: 30,000 kg

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter dryer, receiver dryer -Manufacturer: KMP Kenmore, Receiver Dryer -Type: KHP 64/130/S-8X8MM-DF -Dimensions: Ø 65 x 167 mm -Weight: 0.6 kg

Complete extrusielijn. Op aanvraag kunnen ook losse componenten worden aangeboden. De lijn is gebruikt voor het maken van buizen van PP gevuld met krijt en bariumsulfaat. Onderdelen: - 4 Componenten Colortronic dosering (nieuwe sturing in 2017) Ble Udsu Rda Is Dvycop - Berstorff KMC 85/2 (schroeven in 2019 vernieuwd) - Sidefeeder - Complete sturing van de doseringen en extruder - Single olie- temperering - Maag smeltpomp - Krausmaffei Extrusiekop 40 tot 160 mm (met diverse sets) - Vacuumtank Battenfeld V250VA - Spray-bad K250 VA Battenfeld - Trekwerk C250 - 4 Sica - Zaag CCM 32/170-2 Rollepaal - Kieptafel Battenfeld

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter drier, receiver dryer, filter drier -Manufacturer: KMP, Filter Drier -Type: MB 20 B6 5/8 FLF -Dimensions: Ø 42 x 210 mm -Weight: 0.4 kg

Maximum Diameter: 800 mm // Minimum Diameter: 280 mm

Extrusion line for drip irrigation

Material : PP // Forming Area (Vxh): 825 x 675 mm

Key data: 4 kN, 70 mm

Injection Molding Machine Injection Molding Machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of Make: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving Force Moving Plate: open: 105 kN close: 95 kN Clamping plate (h x v): 1,060 x 1,095 mm Clear width (h x v): 710 x 710 mm Tool opening travel: 920 mm Tool installation height min.: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry run rate: 1,550 1/h Oil filling: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 to L/W/H: 6,510 x 2,040 x 2,380 mm Tool weight max.: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Spray pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g I ...

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -Design: B3/B5 -Protection class: IP 44 Quantity: 1 piece available -Dimensions: 480/285/H335 mm -Weight: 69 kg

General SKU289P513 MakeKMA TypeSZ 112 A-ZD-50/40 Mach.No.70226/6369 Year of construction1997 Pressure Working pressure1.5 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor1.3 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity5 m3/h With motor1,3 kW 400/690 volt Ex Inletdia. 38 mm Outletdia. 38 mm Centrifugal Pumps MaterialStainless steel General LocationBarneveld Floorspace0,5x0,3 M Total height0,4 M Weight30 KG CEcheck Extra SpecificationsCEOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKMAIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemic ...

General SKU337T903 MakeKMPT process technology TypeHZ 100/1.6 Si No.60000886 Year of construction2007 Mounted on framecheck Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifuge:syphon type: Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) General LocationBarneveld Floorspace5,35x4,5 m Total height3,5 m Weight5760 CEcheck ATEX designedcheckPeeling centrifugesGeneric medicinesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBio ...

electric motor, three-phase motor -Power: 1.1 kW -Speed: 700 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/213/H230 mm -Weight: 29 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Jungheinrich, tiller head / tiller complete from pedestrian stacker type EJE-KmS -Number: 2x drawbar available -Price per piece -Dimensions: 1050/510/H220 mm -Weight: 20 kg/pc.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible.

Paul Double Edger KM2, good condition, 9.6 kW, 590 mm cutting length, 80 mm cutting heightPrices subject to change, errors, printing and typesetting errors excepted

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg

Key data: 5000 kN, 2 g/PS, 90 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 9.5 kg

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 180/140/H170 mm -Weight: 5.6 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

Geared motor, electric motor, electric geared motor -Speed: 259 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 32 mm -Protection class: IP 55 -Weight: 30 kg

SINMAG KM25 Spiral kneading machine used Year of manufacture 2014 from plant closure two speeds, three gears (first gear reversible as mixed gear) Kettle, spiral and dough crusher made of stainless steel not tinkered with Machine in very good condition Machine can be controlled digitally and optionally also operated analogue via the side switch Three clocks for mixing and both kneading speeds Boiler with clockwise and counterclockwise rotation Machine must be thoroughly cleaned before use Video about test run available

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg

This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.

MANURHIN KMX 326 C sliding head lathe was built in 2008 in France by MANURHIN KMX. The machine, distinguished by its high efficiency, was specially designed for precision machining of workpieces with even the most complex geometries. All machining processes, i.e. precision drilling, threading and turning are performed by means of a reliable spindle and tools taken from two capacious turrets. The MANURHIN KMX 326C CNC automatic lathe is offered with equipment, consisting of, among others, a CNC controller, bar feeder and tooling. The total weight of the machine is 2600 kg. Technical specifications of the MANURHIN KMX 326 C CNC lathe - CNC controller: GE FANUC Series 18i-TB - number of axes: 5 (X1, X2, Y, Z, C) - spindle rotational speed: 50-7200 rpm - spindle bore: 26 mm - spindle stroke: 160 mm - 6-position turret (2 pcs.) - bar feeder: FMB turbo 3-36 - toolholders - collets  ...

Kao Ming KMC-1800DV Vertical Machining Center Year of Make: 2002 Control: Heidenhain TNC 426/430 Program running time: 48,000h Spindle running time: 10h Spindle has recently been completely renewed. Invoice available Technical data Spindle speed: 120 - 12,000 min-! Drive Power: 25KW (40%) Tool holder: SK 40 Number of magazine slots: 32 pcs. Travels: X-axis: 1940mm Y-axis: 1200mm Z-axis: 500mm Distance table to spindle nose: 150 - 650mm Accessories: - Chip conveyors - High pressure coolant with 40bar - Heidenhain touch probe - Heidenhain Length Probes

This 7-axis KMT Speedmaster 104260-H was manufactured in 2001. It features a spindle speed of 8,000 rpm, chuck size of 20 mm, and bar capacity of 20 mm. The machine includes two turrets, each holding 8 tools, and is compatible with steel and aluminum. Consider the opportunity to buy this KMT Speedmaster 104260-H swiss type turning machine. Contact us for more information.

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Construction type: 1x B5 6x B3 -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 450/250/H310 mm -Weight: 57 kg

Key data: 40000 , 8100 , 130

KRAUSS MAFFEI KM4000 - 19000 MC Clamping force: 4000 T / 40000 KN Year : 1998 Screw diameter : 130 mm Injectable volume : 8100 gr Distance between tie bar : 2240 x 1800 mm Platen dimensions : 3340 x 2940 mm Min / max mold thickness: 1100 / 2000 mm Opening stroke: 4200 mm Stroke of the ejection unit : 350 mm Weight : 255 T   + KUKA robot

â Product description âœ"Manufacturer: KÖVY âœ"Type : KM4 Head machine Fortuna âœ"Manufacturer: Edmund Schröder âœ"Type : Fortuna KM âœ" 4 rows âœ"Condition: used âœ"We have 2 pieces in stock Details see picture

Three-phase motor with 2 speeds, electric motor -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg

Used colloid mill made by Młynkol model KM300. Capacity 300 kg/h 10 kW motor, 2900 rpm voltage 3x400 V type SG132 S2 PC 20.9 A 50 Hz weight approx. 115 kg, hopper volume 17 l The grinder is used for mincing meat, raw hides, fish and other meat products. It is also used in dairy production (homogenising quark), as well as for mincing fruit, e.g. in ice cream factories. Through a highly precise cutting process of all ingredients, it enables the use of parts such as stomachs, intestines, feet and tendons in the production of various types of sausages. This improves the taste and texture of the food. Colloid mills play a major role in the production of liver sausage, fillings and sauces. The correct amount of water and fat is crucial for the grinding process to run smoothly. To achieve maximum efficiency, the input product should contain 40% water and 20% fat.

Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg