128,681 used machines on RESALE, but how to find them? Machine Search
Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container rotating device -Roller spacing: 215 to 1470 mm -Rollers: Ø 200 mm -Load capacity: about 2000 kg -Number: 1 piece available -Dimensions: 1720/500/H500 mm -Weight: 136 kg
pressure: 320 t chamfer lenght: 4100 mm : 600 : 250 : 2900 mm Stroke: 265 mm throat: 400 mm distance between columns: 3750 mm dayligth: 550 mm table width: 60 mm oil volume: 600 l weight: 29.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set, 4-piece hard -Jaw width: 38 mm -Dimensions: see photo techn. drawing -Dimensions: 130/150 / H90 mm -Total weight: 8.8 kg
Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg
Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 34 mm -Overall dimensions: 130/100/H80 mm -Total weight: 5.5 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Overall dimensions: 70/60/H55 mm -Total weight: 1.1 kg
Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.
Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.
Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: 70/60 / H50 mm -Total weight: 1.0 kg
Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg
Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B45 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 3.9 kg/pcs.
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B50 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 4.9 kg/pcs.
PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, control card Simatic S5 -Type: PC 612 F B1200 6ES5281-4UA12 -Dimensions: 275/200/H50 mm -Weight: 0.5 kg
Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine
Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl
Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMRE 71K 4 -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.5 Nm -Dimension: 530/200/H235 mm -Weight: 27 kg
Geared motor, electric motor, electric geared motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BPRE 71 K 4 -Speed: 40 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.4 Nm -Dimensions: 520/203/H235 mm -Weight: 26 kg
Lightbus combination input/output module, input/output module, parallel input/output, analog output -Manufacturer: Beckhoff, analog output -Type: M-2400 -Input voltage: 24V DC -Price per piece -Number: 2x available -Dimensions: 270/70/H75 mm -Weight: 1 kg/pc.
Hydraulic filter, filter element -Manufacturer: Hydac Betafit OVP -Type: 1.11.16D03BN -Number: 2x filters available -Price per. piece -Dimension: O 80 x 425 mm -Weight: 1.3kg/pcs
Electric motor, three-phase motor -Manufacturer: Bäuerle, electric motor type UOF100/94-2 -Power: 1.5/1.75 kW -Speed: 1430/2880 rpm -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 345/270/H225 mm -Weight: 25 kg
1 piece used MOBILE CEMENT SILO (second silo already sold) Brand: NORMANN BOCK Type: WS-22,5 YEAR: 1994 Volume: 22m3 Immediate available location: Wittenberg/Germany price on request offer and all price are net and ex stock, without guarantee and/or guarantee, mistakes and/or false representations reserve, subject prior sale selling in current state / how is it – standing or recumbent,
Test pump, pressure device, measuring device, pressure pump, pressure test pump -Test pump: mobile pressure device -Pressure gauge: 16 bar -Container: volume 95 liters -Dimensions: 1270/490/H1060 mm -Weight: 89 kg
ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...
Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg
Sourdough Mixing Kettle Anneliese Biomat -Sourdough machine -Anneliese -Biomat -mobile on castors -Stainless steel
Lightbus combined input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, Input/Output Module -Type: M-1410 001 -Input voltage: 24 V DC -Quantity: 1 available -Dimensions: 165/75/H70 mm -Weight: 0.7 kg
Device for inline measurement of Brix(sugar)o.Diet, CO² and conductivity
max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stations: 30 Stk. max. speed sets: 8000 /h max. paper size: 35x50 cm incl. BDF bookletmaker + trimmer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen
Bartscher A120 Convection oven 2012, stainless oven, up to 300,C, timer controls, four trays, 1Ph
Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...
Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 25 pieces -Hole: Ø 16/19/20/22 mm -Diameter: 28.5 to 53 mm, see photo parts list -Overall dimensions: 240/230/H100 mm -Total weight: 9.8 kg
Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 20 pieces -Hole: Ø 16/22 mm -Diameter: 31.5 to 54.5 mm, see photo parts list -Transport dimensions: 230/210/H80 mm Total weight: 9.4 kg
Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Reamers: machine reamers 36 pieces -Mount: Ø 16/22 mm -Diameter: 31.75 to 55 mm, see photo parts list -Transport dimension.: 240/230/H80 mm -Total weight: 18.5 kg
vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm -Weight: 2.9 kg
I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.
Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/225/H80 mm -Weight: 1.5 kg
Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control unit from Bierrebi TA 103 automatic cutting machine -Dimensions: 435/220/H90 mm -Weight: 1.6 kg
Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi, control module from Bierrebi TA 103 automatic cutting machine -Circuit board: Type 2.028.01.063.02 -Dimensions: 460/150/H65 mm -Weight: 2.7 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg
maximum number of results exceeded
please refine your search
