km 250 b used for sale

Overhauls gearbox Reduction 4,950 : 1 Input shaft counterclockwise Output shaft counterclockwise

MIG/MAG hose package extension, intermediate hose package -Length: 6.0 m -Plug -Water cooled -Number: 2x hose packages available -Price: per piece -Weight: 10 kg

Three-phase motor, electric motor -Power: 1.5kw -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 400/270/H220 mm -Weight: 24kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 170 rpm -Power: 1.5 kW -Construction: B5 angle -Diameter shaft: 24 mm -Protection class: IP 54 -Dimensions: 560/270/H210 mm -Weight: 40 kg

Fully automatic erector for corrugated cardboard folding boxes Direction of travel from right to left Carton format range widt 160 - 460 mm, height 160-610 mm, length 210/300 - 510/600 mm Output max. 15 cartons/min, depending on the format Bottom sealing machine GT-B150-H20 for gluing with self-adhesive tape Manual format adjustment Drive 400V/50Hz

Assembly application machine Bourg BST 10 1 tower with suction air + stapling, folding, cutting

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 143 rpm -Power: 1.5 kW -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Dimensions: 620/320/H300 mm -Weight: 52 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

wire electrode, SG2 welding wire, welding wire -small role -AWS: ER70S-6 -net weight: 5 kg -Quantity: 16x package available -Price: per package -Total weight: 5 kg/package

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Dimensions: 640/205/H270 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21.5 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 450/250/H220 mm -Weight: 25.4 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm -Weight: 22 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 55 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Dimensions: 590/229/H250 mm -Weight: 29 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 13 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 33 -Dimensions: 490/230/H230 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5/78 rpm -Power: 0.07/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 455/210/H205 mm -Weight: 22 kg/piece

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 60 bar -Liter output: 5.5 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 0.75 kW 1400 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Dimensions: 520/330/H600 mm -Weight: 100 kg

Electric motor, three-phase motor -Power: 5/7 kW -Speed: 735/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 EX -Brake: with temperature sensor -Dimensions: 920/400/H330 mm -Weight: 175 kg

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

cutting diameter: 320 mm saw band length: 4335 x 32(34) x 1,1 mm cutting width: mm total power requirement: 3,0 kW weight of the machine ca.: 1,27 t dimensions of the machine ca.: 2,4 x 1,750 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIG/MAG hose package -Length: 3 m -Euro plug -Water cooled -with integrated suction hose -Number: 2x hose packages available -Price: per piece -Weight: 3 kg

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

MIG/MAG hose package -Length: 3 m -Euro plug -Water cooled -Spring contact -Number: 1x hose packages available -Price: per piece -Weight: 3 kg

MIG/MAG hose package -Length: 3 m -Euro plug -Water cooled -Number: 5x hose packages available -Price: per piece -Weight: 3 kg

MIG/MAG hose package -Length: 3 m -Euro plug -Air cooled -Spring contact -Number: 3x hose packages available -Price: per piece -Weight: 3 kg

Qty. 1 Second-hand filling monoblock Mfc.: STORK Bepak B.V. Type: VS 60/110/12 LW – 0.25, 0.5, 0.7 L Built: 1992 Carousel type 60 Pourers Equipped with a capping machine - 12 heads Installed power: 13.5 kW Nominal capacity: up to 20,000 bottles/h Working capacity: 12,000 bottles/h for a 0.5 l bottle Two sets of heads for 28x18 and 28x38 caps Two slides Multi-row plate conveyors feeding into and out of the monoblock. Technical assessment: complete device, technically efficient

MIG/MAG hose package -Length: 3 m -Euro plug -Air cooled -Number: 5x hose packages available -Price: per piece -Weight: 3 kg

MIG/MAG hose package -Length: 3 m -Euro plug -Air cooled -Spring contact -Number: 5x hose packages available -Price: per piece -Weight: 3 kg

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

MIG/MAG hose package -Length: 3 m -Euro plug -Air cooled -Spring contact -Number: 5x hose packages available -Price: per piece -Weight: 3 kg

Hazardous materials drip tray with cage, hinged Bauer-Südlohn Type: GD-C Best.Nr.: 206 Drip tray with cage, hinged Dimensions: W138 x H143 x D81cm³ Collection volume: 220l Material: ST37-2 Weight: 265kg Accessible from all sides with a forklift The lock has been removed. However, a new one can be inserted. The pictograms can of course be removed and/or replaced.

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Double hydraulic pump, oil pump, gear pump -double pump -Power: 2.2 kW 1420 rpm -Protection class: IP 55 -Dimensions: 585/263/H238 mm -Weight: 43 kg

electric motor, three-phase motor -Power: 0.6 kW -Speed: 925 rpm -Shaft: Ø 18 mm -Design: B3 -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 360/170/H240 mm -Weight: 22 kg

VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of p ...

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1390 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 33 -Brake -Number: 2x available -Price: per piece -Dimensions: 340/200/H230 mm -Weight: 14.5 kg

Device tester, power supply -For: 15V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

Absolute encoder, incremental encoder with solid shaft -Manufacturer: Lenord Bauer -Type: GEL 260-VN00500A000 -Dimensions: 90/90/H120 mm -Weight: 0.62 kg

Output module, control card, output card, controller -Manufacturer: Bosch -Type: 047832-304401 -Type: 047832-303303 -Number: 1x control cards available -Price: per piece -Dimensions: 140/160/H15 mm -Weight: 0.14 kg