km 250 b used for sale

Three-phase motor, electric motor -Foot defective, see photo -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 405/195/H230 mm -Weight: 34.5 kg

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Power: 0.5 kW -Dimensions: 400/270/H160 mm -Weight: 22 kg

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Connection: 220 volts -Power: 500 watts -Melting capacity of up to: 4.2 kg per hour -Machine: electrically heated -for cartridges -Funding: via compressed air -Weight: 1.8 kg

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMT BD1/1m -Type: SMTBM20A -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: 290/295/H70 mm -Weight: 2.7 kg

turning diameter: 820 mm turning length: 300 mm turning diameter over slide: 465 mm control: max. torque on the spindle: 3000 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: mm steady: mm main drive motor: 50 kW diameter of main spindle: 170 mm spindle passage: 128 mm tailstock quill diameter: 125 mm tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm total power requirement: 52 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Top perforating machine with foot operation, 60 cm working width

Case bending machine - automatic Make Tränklein Model BDM60 Year 1970´s Width 600 mm Condition refurbished after order Available Direct

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Jogger Make Bourg Model jogger Year 1995 Size 58 x 38 cm Height adjustable Angle adjustable Available direct

Forklift motor, electric motor, DC motor, traction motor, drive motor -Voltage: 75 volts -Power: 6.3 kW -Speed: 1400 rpm -Dimensions: 510/320/H280 mm -Weight: 76 kg

Refrigerant compressors system Bitzer Type: 4CES-6Y-40S (x3) Volume: 32.5 m3/h (3x) Cooling capacity for R404A: 63 kW at -5°C/40°C, 52 kW at -10°C/40°C, 27 kW at -25°C/40°C Pieces in stock: 12 Reference number: Z 54 Condition: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Jogger - criss-cross delivery Make Bourg Model TA 860 Year 1995 Height adjustable Angle adjustable Details criss-cross function Available direct

Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: 100 x 100 x 300 mm -Dimensions: 100/100/H360 mm -Weight: 18.4 kg

Compressor Bitzer Type: 6G-30.2Y Volume: 126.8 m3/h Cooling capacity for R404A: 88 kW at -5°C/40°C, 72 kW at -10°C/40°C, 38 kW at -25°C/40°C Items in magazine: 2 Reference number: S183 Condition: Used in good condition Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Technical data for the pallet rack stand: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet racking stand, used Material color: sendz. galvanized Stand type: P 20 Stand profile dimensions: 90 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 4,800 mm high 900 mm deep Hint: The yellow stand guards are not part of the delivery, but can be purchased optionally.

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

Year of construction: 1993 Capacity: max 600 cycles / hr. Dimensions disassembled : Length: 3,000 mm Width: 2,350 mm Height: 2,600 mm Weight: 3.000Kg Was used in a fruit juice bottling plant and is currently set up to handle the following formats: 6 x 1.0l VDF bottles – 6 crates, 3 heads / crate transverse Complete documentation available. The machine has already been dismantled and is ready for collection.

Screen width: 800 mm Screen length: 5700 mm Incl.: Control unit - without control cabinet Mixing station Pump New sieve band Spares Subject to prior sale - errors possible Ref. No.: F-1162

Cooling tumbler, vacuum tumbler, tumbler, vacuum mixer, vacuum mixing machine -Capacity: 1300 liters -Max. Vacuum: 950 mbar -Equipment: ejection flap, cooling housing, cooling -Dimensions: 2370/1500/H2320 mm -Weight: about 1500 kg

Tool setting device, tool presetting device, cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

BMG Polarstar Optima and Fluostar Optima Multimode Microplate Reader Up to 384 wells Fliter wheel 8 Excitation Filter wheel 8 emission Fluorescence intesity -time resolved fluorescence -Absorbance and luminicence POLASRSTAR Fluorescense polarization mode linear and orbital shaking Fluorescence 240-740 nm Absorbance 240-740 nm Fluorescence polarization 380-740 nm Additional 12 more filters

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 3000 rpm -Power: 2 kW -Design: B5 -Shaft diameter: Ø 19 mm -Number: 2 motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 9.2 kg

Beckman Proteomelab PF 2D Protein Fractionation, Integrated Protein Fractionation System 1. Dimension collecting protein fractions based on pH of the mobile phase 2. Dimension Reverse phase separation of the fractions Hardware: -Injector -pH monitor -UV detector -fraction collector 2. Dimension Fraction Collector -HPRP module, high performance reversed phase module -column heater -UV detector Software

DC motor, servo motor, motor, electric motor -Speed: 3000 rpm -Power: 0.4 kW -Electricity: 65 V -Design: B14 -Shaft diameter: Ø 14 mm -Dimensions: 210/160/H160 mm -Weight: 6 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 2.2 kW -Flow rate: 100 m³/h -max. vacuum: mbar -Speed: 1400 rpm -Dimensions: 700/430/H620 mm -Weight: 85 kg

Dosing screw INOX Length: 200 cm Diameter: 150 cm Motor: 1.1 kW Revolutions: 25

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scale shows signs of wear. The scales are not calibrated! The scale only needs to be placed on the floor and be aligned. The scale includes a ramp around to drive them with a pallet truck.

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 300 mm -Opening width: 1640 mm -complete with: rotary servo -Mounting bolt: Ø 60 mm -Intermediate dimension: 270 mm -Dimensions: 1640/540/H2100 mm -Weight: 690 kg

Kupplung für Zusammentragmaschine / clutch for collator Bourg BST-10 Art.: PS679 Ersatzteil Nr. / parts No. 9432080 (9137021)

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-30-001 -Quantity: 1 available -Dimensions: 400/55/H310 mm -Weight: 4.9 kg

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

2 pieces Hohner head mounts (suspension) for Theisen & Bonitz Booklet Maker Price per 1 pc. Art.: PS3135

Set of 5 feed rollers for gathering machine c.p. bourg AE 10/15/30/46 (black) Manufacturer number 9260011, 9260148 Art.: PS5062

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

Package sale of electrical and electrical parts 2x Beckhoff, monitors, type C3640, used 1x Beckhoff Contropanel, type CP7031-0002, used 1x Bosch-Rexroth, Indrat View P19, BTV, used 7x INAT, Echolink 100, used 27x Lumiflex, Passive Mirror, 0-4m, used 10x Lumiflex, Passive Mirror, 0-8m, used 5x Lumiflex, type Areal Transmiter AT-500/2, used 4x Lumiflex, Electronic, used 4x Lumiflex, Light Curtain Electronic, used 4x Siemens S5, used 12x Klöckner-Moeller, fuse disconnector, type GSTa 1, new 8x Klöckner-Möller, fuse socket, PS33/cohlzahl 3, 63A, 660V, New 1x Hydrocompensator, hk 5000 1x Siko Seiki, STP control, Unit STP -300C 1x Sony Monitor