km 250 b used for sale

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manafacture: Budde Condition: Used Drive type: motorized vertical shaft Total length outside: approx. 1500 mm Total length inside: approx. 1850 mm Total width incl. motor: approx. 900 mm Total width without motor: approx. 560 mm Conveying width: approx. 540 mm Material: steel, plastic Colour: light grey Includes feet (height adjustable) and motor gearbox (North 0.55 KW) Ejector/ Smuggler/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to pro ...

amount: 1 STK weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire Electrode, Stainless Steel Welding Wire, Welding Wire -Big roll - Wire Thickness: 1.2mm -Wire electrode: highly alloyed, chemically resistant -Number: 4x rolls available -Price: per package -Weight: 12kg

I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase -Dimensions: 490/300/H70 mm -Weight: 22.4 kg

Gear, stin gear, angular gear -Translation: 1: 10.3 -Drive shaft: Ø 14 mm hollow shaft -Hollow shaft: Ø 14 mm -Number: 17x gears available -Price: per piece -Dimensions: 220/220/H230 mm -Weight: 3.9 kg

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece

EMDE BFR 1500 Big-Bag Filling System with bag inflation system for the dust-free precise and reliable filling of big bags, max. load 1000 kg, electrics 400V/50Hz, power consumption 0.5 kW, capacity up to 40 big-bags per hour

12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.

The scope of delivery includes: 03x Stacking container, used Manafacture: Thyssen Material color: hot-dip galvanized overall width: approx. 850 mm (outside-outside) Frame width: approx. 800 mm Usable width: approx. 780 mm total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside-outside) Frame depth: approx. 480 mm Usable depth: approx. 400 mm Stackable: Yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers can be bent. Furthermore, these dents, or other have damage.

Various roller mills, grain mills, trough screws, plansifters, filter systems, screening plant, grain vibrators Manufacturer: GOLFETTO and BÜHLER The machines come from a flour mill and were in operation until they were shut down. The plant is currently being dismantled. We want to sell the machines as directly as possible from the location in Austria. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

SPECIFICATIONS: Working table: 1000 x 1000 mm CNC control: Bosch CC 120 3-axis machining: X: 1050 mm Y: 920 mm Z: 110 mm 6-fold tool changer Spindle: ISO 25 Vacuum pump (VGS): 40 m³ air Total power: 12 KW Spindle motor power: 4 KW Speed: 18000 rpm EQUIPMENT: 4 spindles

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

Three-phase motor, electric motor -Power: 24 kW -Speed: 1480 rpm -Shaft: Ø 55 x 105 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 760/500/H390 mm -Weight: 251 kg

Bear AR30 planetary mixer 30Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Bear AR40 planetary mixer 40Kg stainless bowl, variable speed, stainless mesh guard, with beater, dough hook and whisk attachment, 3Ph

Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 410/213/H240 mm -Weight: 36 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

Three-phase motor, electric motor -Foot defective, see photo -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 405/195/H230 mm -Weight: 34.5 kg

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Power: 0.5 kW -Dimensions: 400/270/H160 mm -Weight: 22 kg

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Connection: 220 volts -Power: 500 watts -Melting capacity of up to: 4.2 kg per hour -Machine: electrically heated -for cartridges -Funding: via compressed air -Weight: 1.8 kg

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMT BD1/1m -Type: SMTBM20A -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: 290/295/H70 mm -Weight: 2.7 kg

turning diameter: 820 mm turning length: 300 mm turning diameter over slide: 465 mm control: max. torque on the spindle: 3000 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: mm steady: mm main drive motor: 50 kW diameter of main spindle: 170 mm spindle passage: 128 mm tailstock quill diameter: 125 mm tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm total power requirement: 52 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Top perforating machine with foot operation, 60 cm working width

Case bending machine - automatic Make Tränklein Model BDM60 Year 1970´s Width 600 mm Condition refurbished after order Available Direct

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Jogger Make Bourg Model jogger Year 1995 Size 58 x 38 cm Height adjustable Angle adjustable Available direct

Forklift motor, electric motor, DC motor, traction motor, drive motor -Voltage: 75 volts -Power: 6.3 kW -Speed: 1400 rpm -Dimensions: 510/320/H280 mm -Weight: 76 kg

Refrigerant compressors system Bitzer Type: 4CES-6Y-40S (x3) Volume: 32.5 m3/h (3x) Cooling capacity for R404A: 63 kW at -5°C/40°C, 52 kW at -10°C/40°C, 27 kW at -25°C/40°C Pieces in stock: 12 Reference number: Z 54 Condition: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Jogger - criss-cross delivery Make Bourg Model TA 860 Year 1995 Height adjustable Angle adjustable Details criss-cross function Available direct

Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: 100 x 100 x 300 mm -Dimensions: 100/100/H360 mm -Weight: 18.4 kg

Compressor Bitzer Type: 6G-30.2Y Volume: 126.8 m3/h Cooling capacity for R404A: 88 kW at -5°C/40°C, 72 kW at -10°C/40°C, 38 kW at -25°C/40°C Items in magazine: 2 Reference number: S183 Condition: Used in good condition Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Technical data for the pallet rack stand: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet racking stand, used Material color: sendz. galvanized Stand type: P 20 Stand profile dimensions: 90 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 4,800 mm high 900 mm deep Hint: The yellow stand guards are not part of the delivery, but can be purchased optionally.

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

Year of construction: 1993 Capacity: max 600 cycles / hr. Dimensions disassembled : Length: 3,000 mm Width: 2,350 mm Height: 2,600 mm Weight: 3.000Kg Was used in a fruit juice bottling plant and is currently set up to handle the following formats: 6 x 1.0l VDF bottles – 6 crates, 3 heads / crate transverse Complete documentation available. The machine has already been dismantled and is ready for collection.