km 250 b used for sale

x-travel: 400 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK40, xyz 400mm/200mm/400mm, table size 750mm x 300mm spindle speed 40-1600rpm, infeed 8-320mm/min weight ca. 2000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roco PRO BMF-40

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,470 mm Total height: approx. 1,115 mm Material color: black Tyres: 4 tyres (2x braked) Material: Polyethylene (PE) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,115 mm Total height: approx. 1,470 mm Material color bin: black Material color lid: green Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Cutting stock set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -for square up to: 34 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 1005/85/H35 mm -Weight: 4.7kg

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 3000 rpm -Power: 2.9 kW -Construction: B5 -Diameter shaft: Ø 19 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 295/115/H190 mm -Weight: 10 kg

Lightbus combination input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, input-output module -Type: M-1400 -Input voltage: 24V DC -Price per piece -Number: 9x available -Dimensions: 270/75/H70 mm -Weight: 1kg/pc.

Vibro discharge tray Bosche BVA 1800/30, EX, No. 07-6711-02.22.2, 0.8 kw at 1500 rpm Discharge approx. ø 370 mm Installation height height approx. 850 mm Outlet valve pneumatic 24V Very good condition 4 piece(s) in stock and immediately available

resistor, wire potentiometer, resistor -Types see pictures -Price/Sale: complete -Number: 21 packages available -Total weight: 94.5 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 6 Type: A06B-1006-B700 -Power: 5.5/7.5 kW -Speed: 1500/6000 rpm -Shaft: Ø 32 mm -Construction: B14 -Brake -Dimensions: 700/260/H250 mm -Weight: 65 kg

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max. depth ...

Karl Schnell B22 Process Automat Typ 250, suitable for the production of low to middle viscous emulsions and suspensions, such as Soup, sauce and gravy, Injection brine, preparation of process materials, etc, power supply 3AC 400 Volt, 50 Hz, 52 Ampere, 26 kW.

Pneumatic cylinder, compact cylinder -bar: SZD-32/50 -Stroke: 50 mm -Piston rod: Ø 12 mm -Dimensions: 40/40/H165 mm -Weight: 0.5 kg

Pneumatic cylinder, compact cylinder -bar Dattenberg: SZD -50/50 -Stroke: 50 mm -Piston rod: Ø 16 mm -Dimensions: 60/60/H185 mm -Weight: 1.1 kg

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

Control unit, control panel, control panel, control unit, keyboard, screen, control -Control comes: from a machining center BJM type ALBZ-145 -Manufacturer: BJM Beckhoff -Dimensions: 603/418/H100 mm -Weight: 16.2 kg

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Pump max.pressure: approx. 60 bar -Pump max. Liter output: 14 l/min -1x drive: 1.5 kW 2850 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 740/370/H1160 mm -Weight: 120 kg

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

Electric motor, three-phase motor -Power: 3.3 kW -Speed: 2865 rpm -Shaft: Ø 28 x 55 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 445/295/H250 mm -Weight: 31 kg

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

Controller, programmer, program controller -from: Warehouse clearance -Digital P -P: 61411-0-4199951 -BA-No.: E11 S42 522 -Voltage: 220 V -Dimensions: 100/205/H100 mm -Weight: 680 g

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Gear motor, electric motor, electric gear motor -Speed: 19.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 35 mm -Protection class: IP 65 -Hole circle: 210 mm -Recess: 180 mm -Dimensions: 550/250 / H265 mm -Weight: 45 kg

Used truss for a forklift truck from Bauer - Südlon

Three-phase motor, electric motor -Power: 2.2 kW -Voltage: 220/380 V -Speed: 915 rpm -Shaft: Ø 34/28 mm -Length shaft: 120/60 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 495/240/H275 mm -Weight: 28 kg

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

Shrink tunnel BVM SC 4030 SD; good condition; cleaned and tested; new chains and sprockets in 2022; Passage width 400mm; Passage height 300mm; Speed max. 14m/min.; Double chamber. Shrink tunnel BVM SC 4030 SD; good condition; cleaned and checked; in 2022 new chain and chain wheels; working width 400mm; working hight 300mm; spedd up to 14m/min.; double unit.

Bosch alternator -Nominal voltage: 14 V 70 A -Type: 028 903 028 C -Dimensions 158/184/H145 mm -Weight: 5.5 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm - Price: per piece - Quantity: 2 pieces -Dimensions: 238/47/H47 mm -Weight: 0.9 kg

- Clipper Bread Bag Pouch Clip - Clipping machine - with turntable - with high-transport belt

Very well maintained shrink tunnel , 400 V, 13 KW

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Transfer: in the current condition as seen -for: machine tools and systems -Dimensions: 240/150/H80 mm -Weight: 5.5 kg

1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading

Gear motor, electric motor, three-phase motor -Speed: 4000/471 n/n1 -Power: 0.19 KW -Construction. B5 angle -Diameter shaft: 11 mm -Dimensions: 270/200/H130 mm -Weight: 5.5 kg

Used glass lined reactor De Dietrich BE4000. New 1994. Max working pressure: 8bar Air quality delivered to the machine: lack of moisture, pollution

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 420 mm -Piston diameter: 32 mm -Piston rod: 12 mm (connection M 10 x1.25 thread) -Quantity: 4 available -Price: per piece -Weight: 1.8 kg/piece

Used BOSCH GKF 400S capsule machine. New 1999. The device is technically efficient, very little used. Equipment dedicated to #0 capsules Areas of application of the GKF device: - Depending on the execution method, the GKF 400 capsule filling and closing device is used to fill capsules with powders, granules. - The machine is designed for a maximum throughput of 400 capsules per minute. The device was used in the GMP area. Made of stainless steel. Simple operation, very simple maintenance.

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3200 kg -Chain length: 1.5 m -Dimensions: 700/300/H160 mm -Weight: 22 kg

Legionella Water Tester -With documents in English -Dimensions: 480/380/H180 mm -Weight: 3.2 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3200 kg -Chain length: 3.2 m -Dimensions: 700/400/H160 mm -Weight: 31 kg