km 250 b used for sale

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

Working to the end with the MWM 620/2020 engine.

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

Technical data for the shelf connector: Shelving system: Bito Included in delivery are: 01x Shelf connector, used Material color: sendzimir galvanized Total length: approx. 300 mm Middle-center hole: approx. 260 mm Profile abbreviation: L 50 x 50 mm Material thickness: approx. 2.00 mm Weight/pcs.: approx. 0.437 kg

diameter range 0,2-1,3 mm speed - meters/min 15

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Solenoid valve, directional control valve, valve manifold, control valve -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Available in stock 1 x Used BorgWarner Turbocharger type K31 for MAN Genset. The turbo was installed on a MAN E2876 LE 302 gas genset. Last turbo servicing was on July 2019. The equipment is in perfect working conditions.

Line filters, power line filters, three-phase filters, three-phase line filters -Manufacturer: EPCOS -Type: FS.06.3.50 -Voltage: 440/250 V/3 x 16 A/50-60 Hz -Dimensions: 200/155/H80 mm -Weight: 3.6 kg

Power supply, power converter, power supply unit, switched-mode power supply, fire protection control unit -Manufacturer: Ströbich, protronic -Product: Control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm -Weight: 0.1 kg

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Available a complete dehulling line for oats, also efficient on spelt, sunflower seeds..output according technical notice about 3 tonnes per hour..Include all the machines in very good condition very very affordable price..Machines are like new.. list of machine available upon request request wellcome delivery to any destination possible.

Label book printing machine Iwasaki, machine number 1499, 3 colors, 2 colors, punching unit, embossing unit, various mounting plates, laminator, UV dryer, dispenser, slitter rewinder, in good condition, immediately available

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

x-travel: 560 mm y-travel: 300 mm z-travel: 420 mm digital readout: 3 Achsen HEIDENHAIN table-size: 1100 x 250 mm spindle turning speed range: 40 - 1180 U/min spindle taper ISO: 40 feeds: 18 - 384 mm/min milling motor: 3,7 kW coolant: voltage: 400 V total power requirement: 5,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,45 x 1,70 x 1,90 m - Serial-No.: 6760 - 3-axis digital readout HEIDENHAIN - rapid traverse - central lubrication - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Asynchronous motor, main spindle drive, 2AD100C-B35OA1-AS03-A2N1, R911264223, Rexroth, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. - Asynchronous motor, main spindle drive - Power: 12,6 - 18,9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

Available in stock 1 x Used 1000 bar Two Stage Hydraulic Hand Pump with hose. The equipment is used but in good working conditions.

Make : Benhil Model : Microfix 8471 Capacity: 1400 kg/hr Block Loader : Pressure inserter Condition : Very Good Electricals : New Rewiring

Power supply, power supply, DIN rail power supply, switching power supply -Input: 400-500 VAC/50-60 Hz/1.4-1.1 A -Output: 24 V 20 A -Dimensions: 195/80/H175 mm -Weight: 1.8 kg

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Used hydraulic power unit Radial piston pump BOSCH REXROTH Type: PR4-30/6.30-500RA01M01 WNR:R901088867 Q: approx. 8 l/min p max: 500 bar Engine 11 kW 1460 rpm 500V Tank: approx. 80 l Dimensions: approx. 1100 x 800 x 800 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Used hydraulic power unit BOSCH Pump Type 0513400205 140 bar V 25 cm³ Engine 5.5 kW 1445 rpm 400/690 V Tank: approx. 0.2 m³ With pressure accumulator and various solenoid valves Dimensions: approx. 1000 x 700 x 1700 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Used hydraulic power unit BOSCH Pump Type 0513400205 140 bar V 25 cm³ Engine 5.5 kW 1445 rpm 400/690 V Tank: approx. 0.2 m³ With pressure accumulator and various solenoid valves Dimensions: approx. 1000 x 700 x 1500 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

3,85 LF WIDE SPAN RACKS 60CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 60 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 60 cm, disassembled. 16 x traverse approx. 185 cm. 08 x Contact back approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 425,00 € net plus legally valid VAT You will receive an invoice with VAT.

57 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 57 running metres Shelf offer consisting of: 031 x frame approx. 200 x 80 cm , disassembled. 240 x traverse approx. 185 cm. 120 x support shelf approx. 184.5 x 79.5 cm. 240 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7267,00 € net plus legally valid VAT You will receive an invoice  ...

13,35 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 13,35 m Shelf offer consisting of: 08 x frame approx. 200 x 80 cm, disassembled. 56 x traverse approx. 185 cm. 28 x support shelf approx. 184.5 x 79.5 cm. 56 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1724,00 € net plus legally valid VAT You will receive an invoice with VAT.

9,55 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 9,55 m Shelf offer consisting of: 06 x frame approx. 200 x 80 cm, disassembled. 40 x traverse approx. 185 cm. 20 x support shelf approx. 184.5 x 79.5 cm. 40 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1242,00 € net plus legally valid VAT You will receive an invoice with VAT.

7,65 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 7,65 m Shelf offer consisting of: 05 x frame approx. 200 x 80 cm, disassembled. 32 x traverse approx. 185 cm. 16 x support shelf approx. 184.5 x 79.5 cm. 32 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1001,00 € net plus legally valid VAT You will receive an invoice with VAT.

5,75 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 5,75 m Shelf offer consisting of: 04 x frame approx. 200 x 80 cm , disassembled. 24 x traverse approx. 185 cm. 12 x support shelf approx. 184.5 x 79.5 cm. 24 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 709,00 € net plus legally valid VAT You will receive an invoice with VAT.

3,85 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 80 cm, disassembled. 16 x traverse approx. 185 cm. 08 x support shelf approx. 184.5 x 79.5 cm. 16 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 519,00 € net plus legally valid VAT You will receive an invoice with VAT.

1,95 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 1.95 running metres Shelf offer consisting of: 02 x frame approx. 200 x 80 cm, disassembled. 08 x Traverse approx. 185 cm. 04 x Contact back approx. 184.5 x 79.5 cm. 08 x beam / load distributor Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 278,00 € net plus legally valid VAT You will receive an invoice  ...

Used and in very good condition Alfa Laval BCD E905BD P SW CBP air cooled condensor. Complete with 10 fans from Ziehl-Abegg designed for 60ºC, 50/60 Hz - 0,68 kW - 570 RPM - diameter Ø 910 mm. Capacity at delta 598,8 kW and 169.200 m³/h. Capacity at Y 519,5 kW and 135.400 m³/h. Specifications: Our internal stock No. 12244 Brand Alfa Laval Type BCD E905BD P SW CBP Product type Air Cooled Condensor kW 598,8 (Freon) Number of Fans 10 RPM of the Fans 570 Air Flow in m³/h 169.200 diameter fans Ø 910 mm Surface (m2) 2.286 Tube volume 200,5 dm³ Sizes 9230x2300x1400 mm Weight 1.662 kg Remarks | y.o.b. 2016 Amount in stock 1

Bitzer unit Two-stage for freezer and blast freezer, with 2 compressors Bitzer type S6G-25.2Y, including condenser, collector Control box Converted to the compressor. Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

BATES Fully automatic valve bag filling, Thermal valve welding, 140 – 180 bags / hour (25 kg, 50 kg), food/non-food, refurbished, like new Description SPECIFICATIONS Valve bag filling, manufacturer Bates, year of construction 1992. The system is designed for the bagging of dry, fine powder in valve bags, whose valve width V = 135 mm (clear width). Since all parts in contact with the product are made of stainless steel, this system is suitable for both the food and non-food sectors. (From a purely technical point of view, ATEX is also fulfilled – but there is NO longer any guarantee for this.) Depending on the product and its characteristics, the production capacity of 25.0 kg bags is approx. 140 – 180 bags/hour. Of course, the system can also process 50.0 kg bags. The offered installation consists of several components: 1. 60FFED fully automatic filling machine  ...

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.65 kW -Translation: i = 21.8 -Design: B14 -Shaft: Ø 17 x 20 mm -Dimensions: 300/190/H140 mm -Weight: 12.8 kg

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump steering pump -Type: 0 510 415 314 -Number: 2x pumps available -Price: per piece -Dimensions: 150/100/H90 mm -Weight: 2.2 kg

Vacuum pump, rotary vane pump -Drive: 1.25 kW -Flow rate: 40 m³/h -Vacuum: 150 mbar -Dimensions: 530/320/H250 mm -Weight: 38 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 16 406 mm unused Ovp -Type: M32 Black -2 carton: content 5 pads per carton -Price: complete -Weight: 3.2 kg

Quick Snap brush segment, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 17 432 mm unused original packaging -Type: M32 Black -Carton: Contents 5 pads -Price: complete -Weight: 1.9 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 233.50.063 16 bar -Art.-No.: 12064394 -Screw connection: G1/4B -Dimension box: 90/100/H70 mm -Weight: 0.3 kg