klöckner ferromatik used for sale

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector -Manufacturer: Klöckner Moeller, fuse-switch disconnector, 160 A, unused, original packaging -Type: N6-160-V -Quantity: 1x load break switch available -Carton dimensions: 225/140/H115 mm -Weight: 1.6 kg

Auxiliary circuit breaker, miniature circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector, NH fuse base -Manufacturer: Klöckner Moeller, NH fuse base, 3 pieces, unused, original packaging -Type: GS 3 630 A -Quantity: 3 boxes with 3 items each available -Price: per set -Cardboard dimensions: 260/250/H110 mm -Weight: 5.7 kg/set

Auxiliary circuit breaker, miniature circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector, NH fuse base -Manufacturer: Klöckner Moeller, adapter plate, 2 pieces, unused, original packaging -Type: A-GSTA2/50 400A -Item No.: T 8250025 -Quantity: 1x box with 2 pcs. available -Cardboard dimensions: 260/235/H115 mm -Total weight: 2.6 kg

NH fuse-switch disconnectors, auxiliary circuit breakers, line switches, miniature circuit breakers, load break switches, load disconnectors, circuit breakers, power disconnectors, auxiliary switches, main switches, disconnectors, fuse-switch disconnectors, fuse-switch disconnectors -Manufacturer: Klöckner Moeller, NH fuse switch disconnector 250 A, unused, original packaging -Type: GSTA1 -Technical data: 250 A 660 V 3-pole IP 00 -Number: 15x NH fuse-switch disconnectors available -Price: per piece -Cardboard dimensions: 180/260/H115 mm / 250/190/H125 mm -Weight: 3.5 kg / 2.7 kg

2 - K machine

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Ersatzteile für Spritzgießmaschinen Krauss Maffei Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Krauss Maffei Ersatzteile Elektronik Elektronikkarten Module Ferromatik B&R PC 900 KXNO168510 B&R 5AP953.1043-K01 Ferromatik B&R 2003 DM465 7DM465.7 Ferromatik B&R 2005 3BP150.4 Ferromatik B&R 2005 AI375 3AI375.6 Ferromatik B&R 2005 AM050 3AM050.6 Ferromatik B&R 2005 AO350 3AO350.6 Ferromatik B&R 2005 AO350 3AO350.6 Ferromatik B&R 2005 DI450 3DI450.60-9 Ferromatik B&R 2005 DI450 3DI450.60-9 Ferromatik B&R 2005 DI475 3DI475.6 Ferromatik B&R 2005 DI476 3DI476.6 Ferromatik B&R 2005 DI486 3DI486.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM486 3D ...

Spare parts for injection molding machines Spare parts electric ferromatics Ferromatics B&R DI 476 3D476.6 Ferromatics B&R AO 350 3AO350.6 Ferromatics B&R DO 480 3DO480.6 Ferromatics B&R AT 660 3AT660.6 Ferromatics B&R DO 479 3DO479.6 Ferromatik B&R UM 161 3UM161.6 Ferromatics B&R E16DZ4H-L_3 224112411 Ferromatics B&R AT 660D_1 22411605/1 Ferromatics B&R 224102410/2 Ferromatics B&R 22411245/1 Ferromatics B&R 22410281/3 Ferromatics B&R AT 660D_1 22411245/1 Ferromatics B&R 5E2000.03 Ferromatics B&R C830 305 040-4V1 C830305040-8V1 Ferromatik B&R PS465-1 22411110 Ferromatics B&R EX 302 2EX302.5 Ferromatics B&R AI 375 3AI375.6 Ferromatics B&R AT 650 3AT650.6 Ferromatics B&R PS 475 3PS475.9 Ferromatik B&R PS 477 I/O BUS 3PS477.9 Ferromatics B&R CP 152 3CP152.9 Ferromatics B&R BP 154 3BP154.4 Ferromatics B&R BP 150 3BP150 Ferromatics 1 818 300 066 / 0 811 405 110 5491 ...

Spare parts for Ferromatik injection molding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -

Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.

A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.

A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible ...

Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG

Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mou ...

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...