kl used for sale

Saccharification plant (1), consisting of: VA cooker KLÖCKNER HANSEL, year of construction 1992, 2 mixing tanks, 1 belt dryer STELA approx. 1,500x300x500 cm, 3 gas burner ECLIPSE, with extraction system, 1 VA conveyor belt for material feeder, 1 screening system BRABENDE, year of construction 1995, 1 mixer approx. 200x50x50 cm

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

fuse base -Type: S27 -Price/Sale: complete -Quantity: 4 pieces -Weight: 4.8 kg

Rail support -Type: SAT38/3 Price: per package -3 packages: 5 pieces each -Weight: 1 kg per package

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 165 mm -Passage: Ø 47 mm -Weight: 7 kg

Three-phase motor with 2 speeds, electric motor -Power: 4/5 kW -Speed: 930/1445 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -pole changing -Protection class: IP 33 -Dimensions: 585/400/H325 mm -Weight: 110 kg

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Conveyor belt with gear motor, width 900mm Length 11 meters

Robot DENSO, (sn: 02F133) Year of construction: 2009 Number of axles: 6 Control: RC5-VSE6BA-BP Pick-and-place robots with KRUPS conveyor belts. Reading system, automatic conveying

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1700 rpm -Shaft: Ø 18 x 40 mm -Construction: B3 -Dimensions: 290/270/H190 mm -Weight: 14.2 kg

Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DILM50 Price: per piece -Quantity: 1 available -Weight: 0.8 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DIL ER-22-G -Price: per piece -Quantity: 3 available -Weight: 0.2 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DILR40 -Price: per piece -Quantity: 3 available -Weight: 0.3 kg/piece

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DIL ER-31 -Price: per piece -Number: 8 available -Weight: 0.2 kg/piece

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

x-travel: 970 mm y-travel: 420 mm z-travel: 430 mm Control: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/min feed range lengthways and crosswise: 8-2000 mm/min feed range - vertical: 4-1000 mm/min rapid traverse longitudinal and cross: 4 m/min rapid traverse Z-axis: 2 m/min weight of the machine ca.: ca. 3,8 t dimensions: ca. 3050x2350x2320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -AC 24-240 V -0.05 s-100 h Price: per piece -Quantity: 3 available -Weight: 0.2 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, liquid receiver -Manufacturer: Klimal, liquid collector -Type: FM 0.88 (M16/M06) -Pressure: up to 28 bar -Contents: 0.88 liters -Dimensions: Ø 80 x 257 mm -Weight: 0.7 kg

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Desk box opener with clamping device

Plant for the production of round rolls

Weight: . kg Year: . content: Rubintastkopf cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-22-G -Voltage: 60 VDC -Number: 19x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-31-G -Number: 15x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Automatic Vial or Ampoule Leak Detection Machine Bosch KLD1042 Year of construction: 2008 Diameter of ampoules min./max.: 10 - 32 mm Speed: 24,000 ampoules/hour up to Ø 13 mm (3ml ampoule) 18,000 ampoules/hour up to Ø 18 mm (5ml ampoule or 4R vial)

Used Roll Splitting Machine Manufacturer: KLANKE Type: RGS-50A Year of manufacture: 03/2013 specifications: Roll width: max. approx. 3,000 mm Roll diameter: max. approx. 2,100 mm Cutting force: approx. 60 t (2 x 30 t) Operating pressure: max.: 200 bar Drive power: 7.5 kW Machine weight: approx. 15,500 kg Oil tank volume: approx. 140 Ltr. including frequency converters including: - Steel plate belt as feed belt Type: TLK 3000 Conveyor width: 3,000 mm Length: 5,520 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm - Steel plate tape as take-off belt Type TLK 3000 Conveyor width: 3,000 mm Length: approx. 3,500 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm including frequency converters  ...

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Weiss Air Conditioning Ultraclean ULTRA 55.2  Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10.5 kW Cooler: 12.7 kW Humidifier: 3 kg/h Filter class: F7 Supply air flow 2500 m{h ext. pressing 200

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor -Manufacturer: Parker, sensor closer unused Ovp -Type: KL3183 -Voltage: 10-200V -Number: 112x sensor available -Price per piece -Dimensions rolled up: Ø 90 x 10 mm -Weight: 0.1 kg/piece

max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sales on behalf of a customer, further data on request

1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...

Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Heat exchanger: air/air -Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 -Rotor: Diameter: 2570 mm -Speed: 8 rpm -Dimensions: 4066/2750/H460 mm -Weight: 850kg

ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg

Make: KOMFOVENT Type: KLASIK-RECU-9-IS3-C-18.5/15.0-F7/M5-X-X-CW Year of Make: 2014 Capacity: 25,300 m³/h Current consumption: 63.8 A very good condition, as good as new facility Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Max. punching force: 500 kN Projection: 610 mm Includes an assortment of stamps and dies Weight: 1700 kg

Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device, time relay, multifunction relay -Manufacturer: Klöckner Moeller, time relay multifunction relay -Type: TE 69-A -Number: 1x relay available -Dimensions: 80/25/H100 mm -Weight: 0.1 kg

KLÖCKNER MEDISEAL CARTONING MACHINE, MODEL P1600 Year of construction: 2016 Intermittent motion sideload cartoner for folding boxes for small and medium batch sizes. Dimensions (mm): 5700 x 2300 x 2100 Weight: 3000 kg Output: up to 150 cartons/min. Includes automatic bottle feeder. The machine is not complete.

table diameter: 800 mm x-travel: 600 mm y-travel: 700 mm throat: 650 mm stroke: 300 mm milling-head swivable +/-: mm workpiece height: 400 mm stroke of worktool slide: 6-42 Hub/min slot-milling length: . mm groove width: . mm flute depth: . mm total power requirement: 7,4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device, time relay, multifunction relay -Manufacturer: Klöckner Moeller, time relay multifunction relay -Type: TE-68 TE 68 -Number: 1x relay available -Dimensions: 80/25/H100 mm -Weight: 0.1 kg

Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg

drivers seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, drivers seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg

Klöckner-Moeller Track System BD O-100 A Klöckner-Moeller Busbar system BD O-100 A 500 V Track 160 cm 120 pieces 192 meters More items - new and used - can be found in our shop! International shipping costs on request!

temperature max.: . ° length: 15000 mm width: 6000 mm height: 5500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Air-conditioned room air-conditioning technology: Klimatec-to be loaded with a crane through 2 openings in the ceiling. -Or can be walked and driven on through doors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.