128,876 used machines on RESALE, but how to find them? Machine Search
FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...
Ersatzteile für Spritzgießmaschinen Krauss Maffei Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Krauss Maffei Ersatzteile Elektronik Elektronikkarten Module Ferromatik B&R PC 900 KXNO168510 B&R 5AP953.1043-K01 Ferromatik B&R 2003 DM465 7DM465.7 Ferromatik B&R 2005 3BP150.4 Ferromatik B&R 2005 AI375 3AI375.6 Ferromatik B&R 2005 AM050 3AM050.6 Ferromatik B&R 2005 AO350 3AO350.6 Ferromatik B&R 2005 AO350 3AO350.6 Ferromatik B&R 2005 DI450 3DI450.60-9 Ferromatik B&R 2005 DI450 3DI450.60-9 Ferromatik B&R 2005 DI475 3DI475.6 Ferromatik B&R 2005 DI476 3DI476.6 Ferromatik B&R 2005 DI486 3DI486.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM486 3D ...
Spare parts for Ferromatik injection molding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...
Spare parts for injection molding machines Spare parts electric ferromatics Ferromatics B&R DI 476 3D476.6 Ferromatics B&R AO 350 3AO350.6 Ferromatics B&R DO 480 3DO480.6 Ferromatics B&R AT 660 3AT660.6 Ferromatics B&R DO 479 3DO479.6 Ferromatik B&R UM 161 3UM161.6 Ferromatics B&R E16DZ4H-L_3 224112411 Ferromatics B&R AT 660D_1 22411605/1 Ferromatics B&R 224102410/2 Ferromatics B&R 22411245/1 Ferromatics B&R 22410281/3 Ferromatics B&R AT 660D_1 22411245/1 Ferromatics B&R 5E2000.03 Ferromatics B&R C830 305 040-4V1 C830305040-8V1 Ferromatik B&R PS465-1 22411110 Ferromatics B&R EX 302 2EX302.5 Ferromatics B&R AI 375 3AI375.6 Ferromatics B&R AT 650 3AT650.6 Ferromatics B&R PS 475 3PS475.9 Ferromatik B&R PS 477 I/O BUS 3PS477.9 Ferromatics B&R CP 152 3CP152.9 Ferromatics B&R BP 154 3BP154.4 Ferromatics B&R BP 150 3BP150 Ferromatics 1 818 300 066 / 0 811 405 110 5491 ...
Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...
Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -
Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.
A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.
Key data: 1100 kN, 201 g/PS, 40 mm
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...
Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG
3 x Ferromatik injection moulding machines Ferromatik K155, built in 1999 Ferromatik K275S, built in 2000 Ferromatik K200, built in 2000
A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible ...
Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg
Key data: 1100 kN
Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...
This FERROMATIK K-TEC 200 2F was manufactured in 2007. A robust hydraulic injection moulding machine, it features a clamping force of 200 kN and a screw diameter of 18 mm. It has processed materials like ABS and PC, and includes attachments such as dryers and temperature control units. Dimensions are 8700x2300x4000 mm, and it weighs approximately 25,000 kg. Consider the opportunity to buy this FERROMATIK K-TEC 200 2F hydraulic injection moulding machine. Contact us for more information.
This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 Ã 1.85 Ã 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.
Key data: 1500 kN
Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...
Key data: 3500 kN
Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...
Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 Ã 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details.
Working Width: 800 mm Working Height: 300 mm Main Motor Power: 250 KW
Key data: 132
Used Deutz A12L614 diesel engine Year of construction : 1955 Air-cooled 12 cylinders 180 hp Clutch power : 132,39 KW Engine has run after major revision only very few hours !
CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...
CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...
Saccharification plant (1), consisting of: VA cooker KLÖCKNER HANSEL, year of construction 1992, 2 mixing tanks, 1 belt dryer STELA approx. 1,500x300x500 cm, 3 gas burner ECLIPSE, with extraction system, 1 VA conveyor belt for material feeder, 1 screening system BRABENDE, year of construction 1995, 1 mixer approx. 200x50x50 cm
CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...
Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15580 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
KLÖCKNER MEDISEAL BLISTER PACKING MACHINE, MODEL CP200 Year of construction: 2018 Very compact machine of balcony construction with minimum space requirements and an output of up to 300 blisters per minute; format change over time of less than 30 minutes. Specially developed for efficient packaging of smaller lot sizes and clinical trials. Balcony construction Roller sealing Full set of manuals Machine previously used in the Pharma industry and is in like new condition, it has been deep cleaned with cleanliness certificates available on request. Water chiller KB56 and extraction unit available on request at additional cost. Output of up to 300 blisters per minute (dependent on product, material, and blister size) Power supply: 230/400V, 3 phase, 50 Hertz, neutral conductor FORMAT RANGE (1 LANE) Draw-off length forming: 170mm Draw-off length punch: 110mm Web ...
PART NUMBER: 7521 Specifications: - inlet width 520mm - inlet height 180mm - shaft width 520mm - shaft diameter 400mm - number of knives 2pcs - sieve dimensions 100x100mm - toothed pulling shaft at the bottom - 2.2kW lower shaft motor - toothed pulling shaft from above - upper shaft motor 2.2kW - feeder length 4400mm - width of the feeding belt 500mm - feeder motor power 1.4kW - main motor 55kW - dimensions of the receiving feeder length/width 8050x880mm - belt width 600mm - dimensions of the machine with the feeding feeder length/width/height 6400x1900x1840mm - weight about 4500kg ADVANTAGES – made in Germany – with a belt feeder: infeed, outfeed – adjustable height of the take-up feeder – used chipper, very good condition Net price: 100000 PLN Net price: 23256 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)
KLÖCKNER MEDISEAL CARTONING MACHINE, MODEL P1600 Year of construction: 2016 Intermittent motion sideload cartoner for folding boxes for small and medium batch sizes. Dimensions (mm): 5700 x 2300 x 2100 Weight: 3000 kg Output: up to 150 cartons/min. Includes automatic bottle feeder. The machine is not complete.
Klöckner-Moeller Track System BD O-100 A Klöckner-Moeller Busbar system BD O-100 A 500 V Track 160 cm 120 pieces 192 meters More items - new and used - can be found in our shop! International shipping costs on request!
Switch-disconnector KLÖCKNER-MOELLER NZM6-100 100 A 660 V spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 210 x 200 x 150 mm
Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
Motor circuit breaker, lockable, with auxiliary switch KLÖCKNER-MOELLER PKZM1-1.0 ( PKZM110 ) 0.6 - 1.0 A 660 V auxiliary switch: NHi10 3.5 A 500 V spare part for TRAUB TND300 ! used, tested !' Dimensions: 85 x 55 x 90 mm
Switch-disconnector KLÖCKNER-MOELLER NZM11-400 400 A 660 V used, tested ! Dimensions: 315 x 220 x 200 mm without gear knob cover is missing
PART NUMBER: 7649 Specifications: - inlet width 900mm - inlet height 300mm - shaft width 1030mm - shaft diameter 700mm - knife length 1030mm - number of knives 3pcs - sieve dimensions 70x70mm - 2 toothed pulling shafts at the bottom - lower shaft motor 7.5kW - 2 toothed pulling shafts from above - upper shaft motor 7.5kW - belt feeder - redler with chain belt 5600mm + 10600mm 2.2kW - width of the feeding belt 800mm - main motor 90kW - reverse gear - total dimensions of the machine length/width/height 3300x3100x1700mm - chipper base dimensions 3300x2080x1940mm - feeder / redler dimensions length/width/height 5600x900x1000mm + 10600x1050x1600mm - Base size for the feeding belt 5100x1300x2520mm - total weight about 16000kg ADVANTAGES – made in Germany – a chain conveyor of the redler type, equipped with scrapers – reverse gear – used chipper, very ...
Load Switch, Load Breaker KLÖCKNER-MOELLER N6-100 160 A 690 v with switch linkage 390 mm used, tested ! Dimensions: 145 x 105 x 130 mm
Motor protection relays, overload monitoring of EEx e-motors KLÖCKNER-MOELLER Z5-100/KK4 70 - 100 A New ! Dimensions: 135 x 120 x 120 mm
Contactor KLÖCKNER-MOELLER DIL3 M ( DIL3M ) 600 V 100 A used, tested ! Dimensions: 140 x 130 x 100 mm
Switch-breaker, load switch KLÖCKNER-MOELLER NZM4-40 40 A 220...500 V with gear knob and shift linkage 250 mm used, tested ! Dimensions: 180 x 90 x 120 mm
fuse base -Type: S27 -Price/Sale: complete -Quantity: 4 pieces -Weight: 4.8 kg
Rail support -Type: SAT38/3 Price: per package -3 packages: 5 pieces each -Weight: 1 kg per package
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DILM50 Price: per piece -Quantity: 1 available -Weight: 0.8 kg/piece
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DIL ER-22-G -Price: per piece -Quantity: 3 available -Weight: 0.2 kg/piece
Load Circuit Breaker, Load Switch KLÖCKNER-MOELLER NZM4-40 40 A 220...500 V used, tested ! Dimensions: 195 x 90 x 120 mm
Switch-breaker, load switch KLÖCKNER-MOELLER ZM-25-PKZ2 DI-PKZ2 25 A 115...575 V used ! Dimensions: 190 x 90 x 140 mm
maximum number of results exceeded
please refine your search
