kk chocolate machinery used for sale

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Key data: 1047 KW, 1251 kVA, 10000 V

KKK Back Pressure Steam Turbine CFR 5 G5 Electricity generators from 1995, Turbine with AC generator and control system. 1 available. Inlet pressure 8.5 – 15 bar, outlet pressure 0.5 – 3 bar, 1,000 KWel x 1500 rpm, 10 KV/50 Hz. AC Generator: Leroy Somer LSA 52 VLS-4P, 1,251 KVA Manufacturer: KKK Model: CFR 5 G5 Type: Steam Back Pressure Serial number: 4 555 020 Power [KW]: 1047 Pressure inlet [bar]: 8.5 – 15 – Norm: 12 Temperature Input [°C]: 290 – 390 Pressure output [bar]: 0.5 – 3 – Norm: 2 Year of Make: 1995 Dimensions LxWxH [m]: 3.60 x 2.20 x 2.20 AC Generator LSA 52 VLS-4P Manufacturer: LSA Model No.: 52 VLS-4P Type: AC Synchronous Generator Serial Number: 162554-1 Power [KVA]: 1,251 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 72 Speed [1/min]: 1500 Year of Make: 1995

Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible.

In the steam chamber pasteurizer, bottles can be pasteurized in crates on pallets with hot steam. The parameters for the temperature rise and the holding time of the set pasteurization temperature can be set as desired. Condition: in working order, well-maintained Nominal capacity (1 l bottles): 480 bottles/h Electr. Power: 4.00 kW Connected loads: 400 V / 16 A / 50 Hz / 5-Ph Steam connection: 3/4 inch Compressed air connection: 6 bar Machine dimensions (WxDxH): 1400 x 2000 x 2700 mm Weight: 700 kg

Krones Model: KKW-50 crate washer Retrofit 2012

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Height=1.79 m, Overall length= 1.36 m, Overall width= 0.56 m, Net weight= 292 kg,

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm mitter cutting - all-position: +90°/-90° ° cutting speed: 10/20 m/min voltage: 400 V feed speeds infinitely variable: 0 - 1000 mm/min total power requirement: 3,4 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1,10 x 0,9 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.

CNC circular saw Type: KKS 451 CNC Manufacturer: Kaltenbach Year: 2014 CNC control + touchscreen PROFICUT Saw blade diameter: 450 mm Motor power: 1.8 / 2.7 kW Selectable power: 4.0 or 5.5 kW Cutting speeds: 10/20 – 13/26 – 15/30 m/min Selectable regulation: 7–43 or 15–75 m/min Saw feed: 0–1000 mm/min Rapid return feed: 3500 mm/min Single material feed: 10–2000 mm Multiple feed up to 9999 mm Max. round material: 150 mm Max. square: 140 mm Max. flat material: 240 × 80 mm Angling range: ±60° Rotating range: 120° Tool type: HSS discs Table magazine for up to 6 meters of material Machine weight: 2500 kg Dimensions: 3300 × 1420 × 2100 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

saw blade diameter: 400 mm cutting diameter: 130 mm saw blade turning speeds: 30 / 60 U/min capacity 90 degrees: square: 120 mm total power requirement: 4,8 kW weight of the machine ca.: 1,8 t dimensions: 1,4 x 1,2 x 2,3 m Semi-automatic Cold Circular Saw - Miter cutting - Micro-spray lubrication system - Safety guard - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Includes roller conveyor (approx. 250cm infeed and 120cm with stop) Adjustable stop with scale Automatic clamping and feed Max. saw blade diameter 400mm Miter cut Coolant pump Documentation 400V

Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motor Max. sanding thickness: 150 mm. Throughput speeds: 2,5 - 11 m/min Motor through-belt: 0,55 kW Height adjustment motorized, motor 0,26 kW Automatic thickness adjustment Input rollers length 700mm Output rollers 1600mm Touchscreen

Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical hydr. Metal Clamping + 2pcs hydr Horizontal Metal Clamp - Coolant device - Feeder – roller conveyor with tray 5000 mm - Discharge – roller conveyor with dimension stop and positioning control 4000 mm - Space requirement approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Feeder – roller conveyor with shelf 4000 mm - Discharge – roller conveyor with dimension stop 4000 mm

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 220 x 80 mm feed length: 600 mm feed length: multiple: 1800 mm cutting speed: 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and ope ...

This machine is stock goods that could not be electrically tested Location: Dresden/Müglitztal Availability: immediately

New. Designed for bed slats stress tests. Power consumption: 230 V The clamping force adjustable from 2 to 10 bar (till 200 kg). Inspection speeds of ~ 40 pcs. / Min. The adjustable length of the product. Simple service. Lamelle test labeled. Marking the label may change. Manufacturer Ltd. MS Import, Lithuania.

Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Best price 4150 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2800x375mm Gross cut capacity- 2800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 2800x1000x1100mm Weight - 800 Kg

The New. ų l ū the tables for tests. Electric ą 's benefit: 230 V. Pressure (j) ė ga adjustable from 2 up to 10 bar. The speed ~ 44 PCs./min the event is governed by the product of the Į ilg į. A simple room. ė table at the time of the test (s) shall be identified. ym ė-ą character can be changed. The Manufacturer JSC MS Import, Lithuania. Video į ra as: abc://abc.youtube.com/watch?v=AqElqGkB7_c&feature=youtu.be

Best price 4600 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg

Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 45,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Weight 3500 kg Video abcs://youtu.be/2q3wHCalvSg

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

English: Model: MB12 Bucket capacity - 0.022 m³ Chassis width - 930 mm Track length - 1200 mm Chassis ground clearance - 370 mm Gradeability - 30° Track width - 180 mm Tank volume - 5.5 L Transport length - 2870 mm Excavator height - 2285 mm Overall dimension - 2870 x 930 x 2285 mm Engine model - Koop 192F / Kubota D722 Engine power - 7.6 kW / 2400 rpm; 10.2 kW; 10 kW / 420 cc Turning radius - 1490 mm Max. digging height - 2490 mm Max. dumping height - 1745 mm Max. digging depth - 1725 mm Max. digging radius - 3030 mm Max. vertical digging depth - 1655 mm Bucket digging force - 6.5 kN Operating weight - 1200 kg All machines are new and come with a one-year warranty. Additional attachments such as rakes, augers, buckets, or grapples can be added to your order if needed. You can choose from a variety of engines that vary in size and power accor ...

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

English: The MB 10-B is our most compact and lightweight model—ideal for projects requiring maneuverability in tight urban spaces or residential backyards. With a sturdy build and precise controls, it's a favorite for small-scale landscaping and trenching. Despite its compact frame, it offers impressive digging force and a smooth, reliable experience. Technical Specifications Weight: 1000 kg Dimensions: 2870 x 930 x 2213 mm Standard Bucket Capacity: 0.022 cbm Engine: KOOP 192 / Briggs & Stratton Power Output: 11.7 hp / 8.6 kW or 13.5 hp / 10.07 kW Issue Rating: EURO V Displacement: 0.499 / 0.794 L Cooling Method: Air-cooled Max. Digging Depth: 1720 mm Bucket Digging Force: From 6.5 kN Hydraulics: Permco TJ Gradeability: 30°

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

MPS EF 410 Year of Manufacture: 2006 ________________________________________ Product Description: • Webwidth: 430mm • 8 x Flexo Printing Unit • Rewinder • Unwinder • Web Path Extension with Heater • Antistatic Bar Single • Web break control • Corona treatment • Combi Slitter Scissor • Web turner unit incl. backside reading • Lamination Unit • Automatic register control • Cooling roller unit • 8 x UV-Dry Sation Air Cooled • Infeed Unit 900 Machine Specifications and Equipment: ________________________________________ Accessories Included:  Manuals  Keys  etc. ________________________________________ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) ________________________________________

Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

With a robust operating weight of 8,500 kg, the RB 85 offers greater lifting capacity and stability while maintaining the speed and efficiency of a road-ready machine. Operating Weight: 8,500 kg Engine: Yuchai YC4DK85-T300, EURO V Power Output: 62.5 kW / 85 HP at 2200 rpm Max Torque: 340 Nm at 1400–1700 rpm Displacement: 3.6 L Hydraulic System: Lonking main valve + swing motor Hydraulic Flow: Up to 30 L/min Controls: Hydraulic-electric joysticks Tires: 8.25-16 heavy-duty pneumatic tires Drive: 4-wheel drive (with optional differential lock) Max. Travel Speed: 28 km/h Max. Digging Depth: 3556 mm (depending on boom config) Cabin: Fully enclosed with ergonomic seat, climate control, and wide visibility Swing Speed: 9 rpm Attachment Interface: Quick coupler standard; supports hydraulic hammers, augers, grapples, and more

The RB135 and RB 150 are wheeled excavators engineered for high-efficiency digging and utility work in urban and semi-urban environments. Operating Weight: 15,000 kg or 13,500 kg Engine Options: Kubota V5009-T or Yuchai YC4D115 (EURO V) Power Output: Up to 157 HP (Kubota) or Up to 115 HP (Yuchai) Max Torque: Approx. 600 Nm at 1500 rpm (Kubota) or Approx. 380 Nm at 1700–2000 rpm (Yuchai) Displacement: 5.0 L (Kubota) / 4.2 L (Yuchai) Hydraulic Pump: Kawasaki PNM variable axial piston pump Hydraulic Valve: Parker high-performance control valve Swing Engine: Sunjin (South Korea) Tires: 9.00-20 industrial-grade tires Controls: Hydraulic-electric joysticks Cabin: Enclosed with heating, ventilation, and ergonomic seating Hydraulic Flow: High-capacity system for powerful attachments Max Travel Speed: Up to 30 km/h Max Digging Depth: Approx. 4,750 mm (d ...

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace