king filling machine used for sale

Bag filling and sealing machine Rianta PS Mako BFS 300 Year of Make: 2020 Condition: cleaned & tested Suitable for 2-core paper or plastic clip tape, 8mm wide, wire diameter. 0.6-0.8mm Capacity: 35 packs/min (depending on product) Max. product dimensions (LxWxH): 450 x 230 x 140 mm Air blower to open the bags Date Printer Incl. inclined conveyor belt, type: SF 1500

Pastry Filling Machine Jufeba FS-1 Year of Make: 2002 New sheet metal cover New filling block, PVC cpl. equipped (right) Capacity 3.5l Filling quantity per filling process 5 to 30 g Dimensions (WxDxH): 38 x 71 x 40 Pneumatic design, required compressed air: 6 bar

Pneumatic filling machineVEVOR Model 1000 ml, 220 V / 10 W, pressing pressure 0.4 to 0.6 Mpa Auction-ID: A7-45677-53

Pneumatic Filling MachineVEVOR Model OMG,Filling Volume 50 - 500 ml, Filling Machine with Hopper, Single Head / for Food + Beverage Auction-ID: A7-45677-55

A fully automatic explosion-protected bottle filling system is offered. Filling station Mewes: 4 nozzles, suitable for alkaline and slightly volatile products, capper, labeling station Pago. Capacity max.: 1000 units per hour, container sizes: 150ml-1000ml, pneumatic drives. Accessories: working platform for container product feeding. Inspection by appointment possible.

Manufacturer: LOWA Model: Capping machine WK12-17 Year of Manufacture: 2025 Type of Machine : Bottle filling and capping machine Condition : New

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

The Tetra Pak TBA/8 110V is a proven aseptic linear filling machine for liquid foodstuffs, which is particularly known for its reliability. It is often used in dairies for UHT milk, juices or similar products.

Tetra Pak's CAP 30 Flex is an optimal closure solution for attaching the cap to your container. The CAP 30 Flex is set to 1000 Slim HeliCap 23.

For many years, the TCAP 45 has been considered one of the preferred closure variants for one litre Prisma packs. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. These newer closures automatically cut through the "pre-punched" layer of the pack when opened. Easy to open and reseal, this closure is practical and modern in use. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

For many years, the TCAP 47 was considered one of the preferred closure variants for one-liter packages. However, when using one-liter Slim packs, this closure is disappearing more and more from the manufacturers' ranges. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. This new HeliCap 23 cannot normally be applied with the existing TCAP 47. However, we are able to convert the existing TCAP 47 for the new HeliCap23 with our workshop team. After that, you can continue to operate your filling line without a PT, which also saves service costs on the PT. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive ...

The TCAP 21 ReCap 2 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 2 combines benefit and cost awareness. In addition, the product is given a secure closure solution. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The further development of the practical ReCap solutions in an even more user-friendly design. Better product flow makes it easier to use. The TCAP 21 ReCap 3 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 3 combines benefit and cost awareness in optimized product design. In addition, the product receives an optimized secure closure solution. Suitable options: conveyor belt system and cardboard packer with or without wrap around, tray shrinker and other equipment. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The straw applicator is the perfect solution for straw application. It is installed between the filling machine and the packaging machine and has servo motors and one or two inverters. The regulated and controlled application of the straw is thus perfectly possible. For years, this unit has been one of the most popular on the market. The constant and trouble-free speed of up to 7500 units/h is ideal for use in conjunction with the TBA 19 filling machine. To ensure that everything runs smoothly, we recommend installing a conveyor belt volume of at least 20m between the filling machine and the applicator. All components were checked and tested. The range can be used for different volume sizes. For this purpose, various components have to be replaced, which we are happy to do at the customer's request. On request, we can provide extensive services. In addition to consulting and plannin ...

This is a power unit with 2 servo motors. The TSA 46 applicators have a compact design and are very reliable. Trouble-free operation in a filling line is guaranteed even with long operating times. We have different variants of straw applicators in our warehouse. Regardless of the condition, all devices undergo a service in which the perfect status is established. For this purpose, wear parts are also replaced and finally various test runs are carried out for later use. Since the package size and also the type of straw vary, we can only assemble the final format parts after an order. If you are interested, please let us know for which format you want to use a TSA 46. We will make you an offer immediately. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a deta ...

Tetra Pak Cardboard Packer 32, CBP 32, V40, in very good condition and workshop inspected and overhauled. Available now.

Tetra Pak (opt. WRAP AROUND) Tray Packer TCBP 70, convertible to many sizes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The Tetra Pak EasyRide Conveyor is a specialized conveyor system designed for the efficient transport and buffering of beverage cartons in aseptic filling lines

The Tetra Pak MultiShrink 62 is an industrial shrink wrapping machine used in filling and packaging lines for beverages and liquid foods. Multipack formation (e.g. 3×1, 4×3 arrangements) Film packaging + shrinking for stable containers In-line operation in automatic production lines High speed for large production quantities Beverage industry (milk, juice, plant-based drinks) Formation of transport and sales packaging Stabilization of products for storage and shipping

The Tetra Pak Easy Ride Conveyor is a conveyor belt system specially designed for the transport of beverage cartons in aseptic filling lines. It serves as an efficient solution for handling and buffering packaging between the different stations of the production line. The Tetra Pak Easy Ride Conveyor is often used in combination with other Tetra Pak machines such as the TBA8 or TBA19 filling machine. In such systems, the Easy Ride Conveyor takes on the task of efficiently transporting the filled and sealed cartons and buffering them between the various production stations. This helps to optimize the production process and minimize downtime. This model is a custom made by TetraPak. It is very space-saving and functional.

On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Conveyor belt systems 21 or 23 according to the desired layout. For the selected asset or your existing lines. Curves, switches and drives can be adapted according to your wishes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Tetra Pak THX21, Helix accumulator, 1500ml/1000ml (and smaller). In its function, the Helix accumulator THX21 collects the packaging between the filling machine and the downstream equipment. In doing so, it ensures that downtimes of the filling machine are reduced and that no damage occurs to packaging in waiting positions. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

A vertical bag packaging machine Aquarius is available. Bag width range: 80mm-250mm, max. bag length: 450mm, packaging capacity: approx. 140bags/min, bag material: film, packaging product: bulk goods/piece goods. An on-site inspection is possible.

Handtmann high vacuum filling machine, type: HVF 660 S, serial number: 29385, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 34.6 A, 24 kW, with 2 Busch vacuum pumps, type: RA 0100 F 503 and KC 0040 D IZ0, capacity: 100 m³/h and 40 m³/h, total dimensions: 1700 mm x 1700 mm x 2380 mm.

Risco vacuum filling machine with lifter for 200 liter meat bins, type: RS605, serial number: S216011, year of construction: 2018, 3 x 400 V, 50 Hz, 11 kW, filling and portioning, filling pressure: maximum: 40 bar, hopper: 350 liter, weight: 995 kg, built-in Busch vacuum pump, type: RA 0040 F 5Z3, capacity: 48 m³ per hour, dimensions: 1300 mm x 2050 mm x 2100 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bin, type: VF 830, number: 38725, year of construction: 2016, 200/575 V, 50/60 Hz, 7.2/17.3 A, 6 kW, dimensions: 2200 mm x 1500 mm x 2150 mm. Including crate with parts.

Vemag vacuum filling machine with lifter for 200 liter meat bins, model: HP12E, number: 1650655, year of construction: 2016, 400-460 V, 3 Ph, 50/60 Hz, 27 A, 16 kW, Vemag vacuum pump, type: KC 0040 D IZ0, serial number: D15251636, year of construction: 2015, capacity: 40 m³ per hour, dimensions: 2300 mm x 1380 mm x 2050 mm.

Novapac cup filling and sealing machine, type: RM 150, machine number: 25 178, year of construction: 2005, 400 V, 50 Hz, denester: 85 mm x 85 mm, dyes: (2x) 72 mm x 72 mm, plastic belt, belt width: (2x) 100 mm, total dimensions: 2400 mm x 2350 mm x 2370 mm. S/s switch cabinet, dimensions: 1000 mm x 400 mm x 2150 mm, s/s control panel, dimensions: 800 mm x 350 mm x 800 mm.

Handtmann vacuum filling machine with lifter for meat bins, type: VF300 B, number: 700, 420 V, 50 Hz, 23.6 A, 9.5 kW, dimensions: 1700 mm x 1300 mm x 2020 mm.

Vemag vacuum filling machine with lifter for 200 liter meat bins, model: DP10E, number: 1570100, year of construction: 2016, 400-460 V, 3 Ph, 50/60 Hz, 25 A, 15 kW, dimensions: 2250 mm x 1400 mm x 2120 mm.

Frey Maschinenbau vacuum filling machine with lifter for 200 liter meat bins, type: F-Line F223, machine number: F223PT1092864, year of construction: 2014, 400 V, 50/60 Hz, 10.45 kW, Busch vacuum pump, type: RC 0021 C 3Z3, serial number: D18180231, year of construction: 2018, capacity: 24 m³ per hour, total dimensions: 2000 mm x 1300 mm x 2100 mm. Including box with various parts.

Consisting of a TBA 8 V110 1000ml Square filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 V110 1000ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 V100 LSC 1500 ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 V100 LSC 1500 ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak screw cap TCAP 45 or 47. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 V100 200ml Base Filling Machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Straw Applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TTB 19 250 ml base filling machine with a Tetra Pak CBP32 V400 Cardboard Packer and a Tetra Pak Straw Applicator SA 30. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 8 LSC 1000ml filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Screw Cap TCAP 47 and a Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 200V 125 ml Slim filling machine with a Tetra Pak straw applicator TSA 21 Tetra Pak TrayPacker TCBP 70 Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a REX TR/27 500ml and 1000ml filling machine with a Tetra Pak Cardboard Packer TCBP32. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Machine type: Filling machine (rotary) Manufacturer: ATM GROUP Model: PAC 9.0 -20/P Year: 2016 Serial number: 316/2016 Control: SIEMENS SIMATIC HMI Application: Filling of pâtés and meat stuffings Filling system: Volumetric dosing Technical data: - Dose range: 50 – 200 ml - Product temperature: up to 60 °C - Output: approx. 6,000 – 10,000 cups/h - Packaging type: Aluminium cups Ø 83 mm (suitable for sterilisation) Machine configuration: - Rotary indexing table - Multi-head dosing station - Product hopper (stainless steel) - Cup feeding / handling system - Conveyor / transfer section - Safety enclosure with access doors - Integrated control cabinet with HMI Remarks: Stainless steel construction suitable for food industry. Condition used. Own mass: approx. 2,400 kg Dimensions (LxWxH): approx. 2,721 x 2,248 x 2,250 mm Auction-ID: A7-40553-1 ...

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5