130,197 used machines on RESALE, but how to find them? Machine Search
Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates
Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575
Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts
Rego SM3 stop and stirring machine Stop and mixer Rego SM3 -for max. 30 liters -with automatic run via timer -manual run -stirring and beating
Machine number: 920601 Operating voltage: 380 V Frequency: 50 Hz Connected load: 43 kVA Nominal primary voltage: 380 V Open circuit voltage: from 2.3 to 4.1 V Operating current: 2.6 kA Throat: approx. 300 mm This is an article from a training workshop Reference: Training workshop - Lot 30
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;
cap. Ø27 mm in 7 mm steel or Ø 16 mm in 12 mm steel; Discharge approx. 175 mm
Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.
Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"
Jaw width: 160 mm including additional jaws Reference: CES - Lot 29
Manufacturer: LAGUN Year: 1991 Type: CNC universal milling machine Numerical control: Heidenhain TNC 355 Axes: 3 axes (X, Y, Z) Strokes: X 1100 mm / Y 600 mm / Z 600 mm Table: 1200 x 550 mm Spindle: 50 to 3000 rpm – motor power 20 kW Equipment: HURON universal head type, coolant system Remarks: Robust CNC universal milling machine for heavy and versatile milling.
2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.
The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system
Historical electric welding machine for exhibition purposes; mobile; Weight = more than 200 kg
Production number: 1154 Operating voltage: 220/380 V Frequency: 50 Hz Connection: 2.5 kW Rated current: 10 A
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672
Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm
Machine number: 1803007 Operating voltage: 400 V Frequency: 50 Hz Rated current: 16 A Connected load: 3 kW Spindle speed: 40 – 2,000 rpm Tool holder: SK 40 Table dimensions: 800 x 400 mm Number of table grooves: 8 Travels: X-axis: approx. 400 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm with three-axis digital display (SINO) Reference: Light Mobility
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;
Pipe bender - Power 3/8" to 2" pipe - Tools for 3/8" - Incl. base frame see pictures
Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): Yes; Unused in box
Key data: 4 , 220 , 120
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
Serial number: 13114001 Operating voltage: 400 V Connection: 1.5/2.2 kW Rated current: 3.5 / 5.0 A Speed: 1450/2900 rpm Grinding wheel diameter: approx. 200 mm Reference: Veatec - Lot 29
Zoller V520B Magnum Setting and Gauge Manufacturer: Zoller Type: V 520 Magnum Year of construction 1998 Specifications: Voltage 230 V Compressed air 4-6 bar Weight 180kg Under table 140kg Maximum tool weights Manual focusing max. 1000 N Automatic focusing max. 200 N More items - new and used - can be found in our shop! International shipping costs on request!
- Own manufacture. - Mammuth hydraulic foot pump. - Mammuth hydraulic cylinder type MFL100. - Mobile.
Voltage: 380V; Magnetic clamping plate 360x150 mm; Power: 1.75kW
Profile bending machine with: - Foot pedal right/counterclockwise rotation - 1 set of standard rollers - All 2 rollers are driven - Working horizontally or vertically Round material solid 35 (800) mm Square material solid 35 (1200) mm Angle steel 50 x 50 x5 (850) mm Flat steel 60 x 10 (800) mm Axle diameter 50 mm Working speed 4.5 m/min Roller diameter - tools 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m
PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW
Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !
TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced
Fiber Showroom Machine - FIBERLASER Model Series HLF Power: 6kW Sheet size: 3000 x 1500mm Changing table Siemens touchscreen control with LAN/USB Siemens Drives Tsubaki conveyor belt for small parts automatic sheet metal layer measurement Precitec Auto Focus Procutter Cutting Head IPG Resonator YLS with 6kW Will include: Warranty CAD CAM Software Libellula[CUT] Commissioning Delivery within Germany Training offered Other sizes / power levels up to 15kW are available at short notice. We are trading house and service provider in Germany for YAWEI machines for more than 15 years. All training / services / spare parts deliveries are handled by us. In our showroom, YAWEI fiber lasers and press brakes can always be tested under power.
Working range 5-80 mm for tip grinding, tip angle infinitely adjustable from 50-180 °, tool speed 8-23 1/min, diameter of pointed disc 100 mm, speed of sharpening disc 2800 1/min, diameter of tip grinding wheel 300 mm, speed of tip grinding wheel 1420 1/min, grinding feed infinitely variable from 0.4-4 mm/min
PSV Groupe mixer Model: M60 Serial: 6003 Stainless, 60l capacity mixer, rotating bowl with tilt discharge, mixing paddle forward and reverse, mobile, 1Ph
Centerless external cylindrical grinding machines Herminghausen SR 40-3 Machine Was improved and rebuilt by the company Ebert. Thus type designation CL 43. Original price 299.000, - €. Operating voltage: 400 volts, power consumption: 22 kW, workpiece diameter 2 - 130 mm, largest grinding length for through grinding 250 mm, grinding wheel diameter min/max 400/600 mm, grinding wheel bore 604.8 mm, control wheel diameter min/max 220/300 mm, control wheel bore 152.4 mm, grinding wheel circumferential speed 40 m/s, control spindle speed infinitely adjustable 0 - 200 rpm, control Siemens S7, cooling lubricant supply unit, weight of the machine ca. 6000 medical history Errors excepted!
maximum number of results exceeded
please refine your search
