kimer 7 36 used for sale

General SKU251U306 MakePfaudler LocationBarneveld Pressure Number of horizontal pressure tanks1 Main Features MaterialGlass Volume750 Ltr. Specified Features - Horizontal tank Capacity750 Ltr. Vessel sizesDia: 1000x1800mm Dished bottomcheck Dished frontscheck Manhole2x side, dia: 900 mm Top connectionscheck OutletDN50 Max. temperature+100ºC With jacketcheck Horizontal tanks MaterialGlass - Enamel (WWG) General No.50626 Year of construction1990 Mounted on legscheck Floorspace1,0x2,4 mtr Total height1,8 mtr Weight780 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatHorizont ...

General SKU392W1206 LocationBarneveld MakeSigri TypeRS77-1-10950.1 Pressure Working pressure shell6 Bar Working pressure tubes3 Bar Main Features Shell (Material)Mild steel Tube (Material)Diabon Surface53.7 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface53,7 m² Tube capacity350 l. Max. temperature165°C Shell capacity520 l. Shell diameter550 mm Shell length5000 mm Max. temperature165°C Shell connectionsDN150 Materialcarbon steel ST52 1.0570, Graphite Diabon General No.34164/5 Year of construction1992 Floorspace0,80x0,80 m Total height6,80 mFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfectionerySolid ph ...

General SKU324U769 MakeHecht technologie Type7_271801 Mach.No.207656 Year of construction2013 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Isolator Capacity± 1500Ltr. Motor0.03kW,230Volt Isolators MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) General LocationBarneveld Floor space2x1,1m Total height2,17m CEcheck Extra SpecificationsunusedThis article is a disposable film insulator for filling small quantities.The device is equipped with a replaceable cover.Extra parts are provided during the sale, including many covers.Additionally, there is a fan with a filter installed.Tea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants ...

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU324U775 LocationBarneveld CEcheck MakeJentec GmbH Type720 &: 100 Ltr. (2x) Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume720 Ltr. Motor15 KW Specified Features - Processing vessel Closed stirring vesselcheck CapacityA: 600 Ltr. (max. 720 Ltr.), B&:C: 70 Ltr. (max. 100 Ltr.) Vessel sizesA: dia. 1200x833, B&:C: dia. 638x569 mm With covercheck Top connectionsDN25, DN50 With jacketA: 150 Ltr., B&:C: 40 Ltr. Max. temperatureA, B, C: max. 0-140 °C With paddle stirrer(A&:C) With turbo stirrer(B) MotorA: 1,5 kW 220-240/380-415 Volt (Ex): B&:C: 3 kW 380-415/660-720 Volt (Ex) Speed mixing shaftA: max. 56 rpm, B: max. 1410 rpm, C: max. 98 rpm With homogeniser(A) Motor15 kW 380-415/660-720 Volt (Ex): max. 1455 rpm MaterialStainless steel 1.4404 With ja ...

Specifications: • 75 x 53 cm 6 mm Accessories: • PC workstation • DZDV PC TOUCHSCREEN PC 32" 9970460-20 incl. console • SLEEKING System HAK 100/Brother hot foil printer/finishing system Year of construction: 2024 Price: We ask for your binding offer Available from: immediately Terms of delivery: ex site – EXW Wiehl Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t Welding table with accessories: - Table size: 2400x1200x200 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary indexing table, positioning table, TC 700 T, Weiss, mint condition Special price The current market price of a comparable new rotary indexing table is approximately €13,600 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! A new rotary indexing table from a production company's spare parts warehouse. The part has never been used and is in mint conditin. Rotary indexing table, positioning table, TC 700 T, Weiss, as good as new, 1000 x 820 x 380 mm, 660 kg, Table D700 mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect  ...

Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors

Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.

Power: 7,8 kW - Amperage: 52 A. - Voltage: 150 V. - 100% ED Magnet L x W: 1.780 x 1.380mm - Conveyor belt: 1.400mm - AA.: Ca. 2.800mm - With Transformer Rectifier of 380V. Primary - Overband Separator will be overhauled, sandblasted and painted

With new 800mm. wide belt and new control-unit.

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

General SKUR1226 MakeAlpine Augsburg (D) LocationBarneveld Type710-CW Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel General No.15972 Year of construction1974 Floorspace2,3x2,2 M Floor space2,2x3,5 m Total height2,3 M Weight5000 KgStarchSpicesCatalysts & fillersPin MillsDetergent & surf.CosmeticsFood additivesSugarSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowdered foodsAlpineIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersMills > Pin MillsIndustries > Chemical > Detergent & surf.Industries > Che ...

Engine Brand: SCANIA, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: SAE 14 , Working Hours: 9400 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: YES , Starter Voltage: 24 Volt , Rated Power: 552 Kw, Rated Speed: 1800 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/stock/diesel-engines/scania-di16-74m-used/42262 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.670 kg, Type number: DI16.74M

Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 237 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/134, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V71N 7083-7000; Transport weight [kg]: 1050

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/107, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71N 7083-7000; Transport weight [kg]: 1240

Bosch DM 4K 7101-D, Servo Module Amplifier Module 1070079646-208 Item condition: Used, in perfect condition Regal(2)B-7_EK(BOR) You can find more modules - new and used - in our shop! International shipping costs on request!

Engine Brand: DETROIT DIESEL, Condition: USED, Nominal Power @ Nominal Rpm: 200 Kw, Bore: 108 mm, Stroke: 127 mm, Engine Capacity: 9300 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71n-7083- 7000-used/101, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71N 7083-7000; Transport weight [kg]: 1260

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 707.7 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 23544 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 884 Kw, Rated Speed: 1200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3516-71z-1w422 2-used/434, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 71Z-1W4222; Transport weight [kg]: 7710

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/202, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/268, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 187 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3406-di-91u-7n 2617-used/721, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 3406 DI 91U-7N2617; Transport weight [kg]: 1500

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 735 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 739 , Generator Hz: 60 , Generator Volts: 380/220 , Generator Amps: 1234.5 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-12v2000g42-generator-739-k va-used/371, , = More information =, , Empty weight: 8.500 kg, Type number: 12V2000G42 GENERATOR 739 KVA

Engine Brand: CATERPILLAR, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 60 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3304pc-4b-7n33 03-core/42348, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 740 kg, Type number: 3304PC 4B-7N3303

Key data: 700 mm

4-jaw face plate - Ø 700 mm - Material: Cast iron - Damage to a threaded head, function given - Diameter: 700 mm - Through-hole: 125 mm - Body width: 110 mm - Total width: 155 mm

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Manufacturer: Vitronics Model: 7038 Year of Manufacture: 2004 Power: 55 kVA Voltage: 3 × 400 V Frequency: 50 Hz Machine Weight: 2700 kg Air Pressure: 6 bar N₂ Pressure: 6 bar N₂ Consumption: 50 m³/h Largest Load: 63 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Densitometer GretagMacbeth DensiEye 700, serial number: 0486.

Technical data of the pallet rack crossbar: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP33 Clasp: 2 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 1,600 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Reference Num.: 4318 Brand: Xerox Type: DC 700 Construction year: 2013 Impressions: 4 mio Available: directly Status: In production Location: Deutschland Equipment: - Duplexdruck - Scanner - Broschürenfinisher - Fiery

A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible.

A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection poss ...

Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich.

Lippert belt conveyor GF 30000-750-600 RA2269 Technical data: Conveyor length (NL): 30000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 30000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0 ...

Height=1.85 m, Overall length= 1.18 m, Overall width= 0.9 m, Net weight= 122 kg,

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Dimensions (L/W/H): 1130x500x1250 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x750x2250 mm Weight: 450 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 680 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2440x1360x2060 mm Weight: 3000 kg Total power requirement: 42 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1100x1500x2100 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1106x883x543 mm Weight: 195 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 500x550x1050 mm Weight: 80 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible.

Transnorm conveyor belt GF 7200-600-500 RA2448 Technical data: Conveyor length (NL): 7200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...