kimer 7 36 used for sale

Listing ID: 22720 Brand: ZF Model:BW 361 Ratio: 5.5931A Power: 1143 kW 1530 hp 1800 Dry Weight :+/- 1480 kg Dimensions: 130 x 140 x 130 cm

Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe, probe tip -Manufacturer: Haimer, Long probe insert for 3D probes -Type: 80.363.00 -Size: Ø 8 mm -Case dimensions: 90/40/H20 mm -Weight: 0.1 kg

Guideway Grinding Machine Waldrich Coburg -30-10 S 3640 Control: Siemens 840D Year of Make: 2012 Travel: X-axis 8,825 mm Y-axis 3,010 mm Z-axis 2,500 mm Table length 8,000 mm Table width 1,800 mm Table load: 18,000 kg Feed X-axis: 1 - 45,000 mm/min Feed Z-axis: 100 - 3,000 mm/min Universal Grinding Head S10 with 110 Degree Tilt / 2500 Rpm / 7.5 kW Vertical Grinding Head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D controller on the left and right of the machine Automatic doors (4x) for easy access to the machine / load / clamping Hydraulic table drive with 18000 kg working load KNOLL HL650/4000 filtration system new 2023 Various grinding wheels Large Package Spare Parts/Ball Screws/Covers Renovation in 2012 for 1.5 million EUR

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

max. width of grinding wheel: 125 mm diameter / bore of grinding wheel: 275 / 300 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 362 A For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 362 A 27 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

Dear Ladies and Gentlemen, the machine is to be returned immediately.the machine ran in a single shift, the Siemens modules are new

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: HL width 80 mm -Length: 360 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 360/80/H75 mm -Weight: 3.9 kg

Bought new in 2019 and only used for a short time in meat-free facility. Can be used for diverse applications such as chopping, flake cutting, granulating, pureeing, and emulsifying. These applications include rework of bakery items, beef/poultry/seafood and by-products, and vegetables/fruits.

HS451, built in 1993, Available with 1-fold/2-fold head/3-fold Optionally retrofit to PLC and E-extruder

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...

push rod -Push rod: hole spacing 288 mm -Mounting: Ø 35 / 22 mm -PipeØ: 60 mm -Dimensions: 360/75/H75 mm -Weight: 5.7 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: Center height 83-175 mm adjustable/swivelling -Type: 36642.M31 -Dimensions: see photos -Dimensions: 280/220/H270 mm -Weight: 12.1 kg

This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.

Fully automatic stretch film packaging machine with weigher & labeler Packing Plant / Wrapper + Labeler DIGI FX-3600 XL Specifications 380-400V / 50-60 Hz / 1.5 kW Suitable for Food-Tainer bowls Output up to 15 packets/min Film width: 350 - 500 mm Max. tray dimensions: L x W x H 350 x 230 x 130 mm Marking system: with thermal labels Max. dimensions of the Thermo Label: 75 x 105 mm Year of Make: 2007 Total weight approx. 200 kg DIGI labeling system 3/6 kg, min 20g, e=1/2g Calibrated until 31.12.2023 Function tested Sale as a defect due to age Stock machine, immediately available! A proper invoice will be issued! Condition & accessories see original pictures! If you have any questions, email or call. 03423-706493

Rexroth Type : 4281. 14 . 09903 . 97 3622-505045314 Kind. . No. 1190103 Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 From stock

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Weight: 9 kg

Bosch starter motor -Voltage: 24 V -Type: 0 001 368 616 -Teeth: 11 -Weight: 15 kg

brake cylinder -Type: BX 3602 -Dimensions: 220/200/H250 mm -Weight: 5 kg

Filmbelichter / Film Processor ECRM 360 Laser Red Serial-No. 4943 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

RAFAMET KCH 360/450 vertical turret lathe was built in 1987 in Poland by Fabryka Obrabiarek RAFAMET. The machine is used for precise machining of large and heavy workpieces whose size does not allow effective machining with standard machines. RAFAMET KCH 360/450 is distinguished by its stable design, equipped with two vertical supports and one side support. Machining is performed on a work table with a diameter of 3600 mm by means of a reliable vertical spindle. The work table offers 20-position speed adjustment in the range of 0.6 to 50 rpm, enabling precise adjustment of the parameters to the production requirements. The position of the head in all linear axes is continuously monitored by state-of-the-art SONY digital readout, which ensures high precision measurement. All this makes the offered KCH 360/450 vertical turret lathe an excellent choice for, among others, the energy, ship ...

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control unit for electric forklifts, control unit, control panel, interface, motor control, motor controller, control, drive control, drive current control, steering control -Manufacturer: Linde, Steering control unit from electric forklift E15Z-02 -Mat-No.: 390 360 88 03 -Voltage: 24V/48V -Dimensions: 130/110/H45 mm -Weight: 0.5 kg

; Gross weight [kg]: 3815; Engine: Scania DC09 072A 02-14; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 525

Heidenhain adapterstecker 364 914-01

Heidenhain RON 806.C0000 - 36000 311 266 04

Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg

turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trotec Speedy 360 – CO₂ laser with brand new laser tube, fully serviced Investing instead of repairing – this Trotec Speedy 360 is immediately ready for use and convinces with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has been used exclusively in professional operation and has always been treated with care. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This not only gives you a proven industrial laser, but also benefits from one of the most valuable wear parts in mint condition. This significantly reduces the investment risk and enables a direct start of production without additional follow-up costs. Proven Trotec quality The Speedy 3 ...

Joint Burning machine, Wolk, JB 360, Size 360 mm, Available Direct, Size: 360 mm

5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672, Tungsten Carbide Quatro, replacement knife / three-knife Zenith 3672

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: VOLVO, Conditie: RECONDITIONED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1/2 , Engine Condition: Rebuild , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 331 Kw, Rated Speed: 1800 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/stock/diesel-engines/volvo-d12-364004-d2-a-long block/22431, , = More information =, , Type: Engine, Type number: D12-364004; Transport weight [kg]: 1250

Engine Brand: CATERPILLAR, Condition: NEW, Nominal Power @ Nominal Rpm: 354.2 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 2100 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 354 Kw, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c13-rra-360597 4-new/795, , = More information =, , Type: Engine, Type number: RRA-3605974; Transport weight [kg]: 1865

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 5400 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 224 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c9-3-c9n-36559 69-used/425, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: C9N-3655969; Transport weight [kg]: 1745

Payload 5,000 kg Lifting height 15 meters Strand count 2 Load chain 10 x 30 Uncoiling of the hand chain per meter of stroke - 174 m Lifting capacity at nominal load 34 daN Weight approx. 115 kg 1 piece(s) in stock - unit price

Manufacturer: Joos Model: HP-S 360 Condition: used Machine Hours : 15.321 h Type of Machine: Press Technical data: Pressing force max. 3600 kN setting range 10 -100 % Total pressing area 6000 x 2000 mm spec. pressure at full design 3.0 daN/cm2 (kg/cm2) 16 cylinders 90 mm diameter 930 mm stroke Hydraulic operating pressure 354 bar Height of the pressing chamber 930 mm Stages 5 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Berstorff ZE 90A x 36D compound extruder Dynamische Tragzahl: 633 kN(Dynamic Load Capacity) Theoretische Lebensdauer bei 120 bar und 300 l/min: 40,000 h(Theoretical Lifespan at 120 bar and 300 l/min) (Siehe Lebensdauerdiagramm, Punkt 8.3.4)(See Lifespan Diagram, Point 8.3.4) Anzahl der Vollzylinder (4 D): 1(Number of Full Cylinders (4D)) Heizleistung pro Zylinder: 9.2 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (4 D): 2(Number of Open Cylinders (4D)) (1x Füllzylinder 4D unbeheizt)(1x Fill Cylinder 4D Unheated) Heizleistung pro Zylinder: 6.8 kW(Heating Power per Cylinder) Anzahl der Vollzylinder (6D): 2(Number of Full Cylinders (6D)) Heizleistung pro Zylinder: 18.4 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (6D): 1(Number of Open Cylinders (6D)) Heizleistung pro Zylinder: 16.0 kW(Heating Power per Cylinder) Anzahl der Kombizylinder (6D): 1(Numb ...

AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new

CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1999. This EMCO EmcoTurn 365 MC features a maximum turning diameter of 310 mm and a turning length of up to 610 mm. It includes a powerful main spindle speed range of up to 5000 rpm and a tool holder with 12 powered stations. If you are looking to get high-quality turning capabilities, consider the EMCO EmcoTurn 365 MC machine we have for sale. Contact us for further details.

Technical Specifications: Maximum speed: 300 m/min Printing Width: 1,200 mm Minimum Web Width: 600 mm Maximum Web Width: 1,300 mm Minimum Cylinder Circumference: 400 mm Maximum Cylinder Circumference: 480 mm Minimum Printing Repeat: 400 mm Maximum Printing Repeat: 800 mm Unwinding & Rewinding: Unwinder Type: Automatic splice Unwinder Diameter: 800 mm Rewinder Type: Double Rewinder Diameter: 800 mm Unwinder and Rewinder: Fully automatic, non-stop Printing Units & Controls: Reversible Printing Units: Units 8 and 9 Extended Drying Units: Units 1 and 9 Viscosity Control: Automatic viscosity control Color Registration Control: Eltromat Video Camera / Web Inspection: BST Drying & Cooling: Print Drying System: Diesel burner Cooling System: Air-cooled water chiller Suitable Materials: • PET • PP • OPP • TWIST PET

Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible.

FUJI CR 363 CR-SYSTEM / 4xInsertion / PC / software / manuals / manf. 2005 / tested! # incl. MAMMO software # EXW Germany

Prometec 089.361.A01

Prometec 0.89.361.A01