127,905 used machines on RESALE, but how to find them? Machine Search
Clamping angle for workpiece clamping, eccentric press -The clamping angle comes from: an eccentric press -Manufacturer Heilbonn Type: REPV60 -Clamping surface: 600 x 720 mm -Plate thickness: 75 mm -Groove: mm -Surface: milled -Dimensions: 735/900/H545 mm -Weight: 532 kg
Gear motor electric motor Electric gear motor -Speed: 184 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/140/H200 mm -Weight: 15 kg
A dust absorber is a device that is connected to the ventilation system. Its function is to extract suspended particles. This task is fulfilled by the fan and filters built into the device. Using a dust absorber improves air quality, making it easier to keep the machine clean. As a result, the life of the device is extended. Using it is also safer for the environment and the health of the operator. Specifications: Power supply: 400V AC 50hz Capacity: 3000-4000 m³ Rated power: 7.5kw Filtration area: 40 m² Number of filters: 4 pcs Filter size: ⌀325mm Filter height: 660 mm Weight: 400 kg Height: 1980 mm Width; 1000 mm Depth: 1000 mm
New mixing silo: 7000 L. Model: MV-7000, with 4KW geared motor, load auger: 2.2 Kw, discharge auger: 2.2 Kw.
Gear motor, electric motor, three-phase motor -Speeds: 33 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 385/200/H180 mm -Weight: 15.7 kg
Three-phase motor, electric motor -Replacement motor for geared motor type: SS140HF-71S/4 -Power: 0.26 kW -Speed: 1400 rpm -Shaft: Ø 15 mm gear -Design: B14 -Protection class: IP 55 -Dimensions: 250/140/H175 mm -Weight: 5.35 kg
RAFFEL NH3 – 722 m² Brand:RAFFEL Type:NH3 – 722 m² Stock number:M23-2490 Cooling capacity:120 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:5100 x 2260 x 5060 mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Visit our website: used-refrigeration
Shelves, shelves, shelves -Material: Galvanized -Dimensions: 765/995/H37 mm -Number: 30x shelf plates available -Price: complete -Transport dimensions: 1200/800/H1330 mm -Transport weight: 224 kg
Drum screening machine with conveyor technology Drum 7000 x 2500 mm, screening fine fraction and 100 x 100 mm fraction Discharge of fine fraction by means of screw conveyors Discharge of oversize particles by means of belt conveyor
Key data: 760 mm, 430 mm, 450 mm
Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 705 mm -Thickness: 25mm -Recess: 270 mm -Short cone diameter: 192/217 mm -Hole circle: Ø mm -Weight: 71 kg
Qty. 1 Second-hand Labeling machine Mfc.: KRONES A.G. Type: Universella 723 - 0.25, 0.5, 0.7 L Built: 1993 Labeling without positioning or with side positioning. Carousel type 15 pcs. plates Gluing: label, counter label, large and small "L" type band. Several sizes of palettes. Multi-row plate conveyors feeding into and out of the labelling machine. Technical assessment: complete device, technically efficient.
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 748 mm -Rezess: 350 mm -Hole circle: Ø 600 mm -Weight: 100 kg
Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg
Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Brake -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 330/160/H205 mm -Weight: 13.1 kg
CPU module, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Several single modules -Number: 1x stations available -1x type: 7CP474.60-1 -2x type: 7DM465.7 -1x type: 7DI439.7 -Price: complete -Dimensions: 400/170/H70 mm -Weight: 3.2 kg/piece
MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm
Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel
Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 505/210/H170 mm -Weight: 15 kg
Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding
Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan
Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side ...
Transnorm conveyor belt GF 16650-700-600 RA2178 Technical data: Conveyor length (NL): 16650 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 16650 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s: ...
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Slab: planed -Width: 793 mm -Length: 997 mm -Height: 930 mm -Sheet thickness: 60 mm -Plate: solid -Weight: 418 kg
For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg
Transnorm conveyor belt GF 1200-700-600 RA2187 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyo ...
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 503 mm -Length: 795 mm -Height: 102 mm -Plate thickness: 20 mm -with: support ribs -Weight: 75 kg
Transnorm conveyor belt GF 3200-700-600 RA2183 Technical data: Conveyor length (NL): 3200 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,58 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / ...
-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high
Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...
Transnorm conveyor belt GF 19700-700-600 RA2146 Technical data: Conveyor length (NL): 19700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 19700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s: ...
GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg
Three-phase motor with 2 speeds, electric motor -Power: 7/20.5 kW -Speed: 975/1460 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 54 -Dimensions: 690/430/H360 mm -Weight: 186 kg
Transnorm Rising falling Incline belt conveyor with leading belt GF 1300+6000+1900-700-600 RA2072 Technical data: Conveyor length (NL): 9200 mm ( 1900 mm arch + 6000 mm riser segment + 1300 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9200 ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4250 ( 8 ...
Gear motor, electric motor, electric gear motor -Speed: 16 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 29 kg
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg
Transnorm conveyor belt GF 4350-700-600 RA2206 Technical data: Conveyor length (NL): 4350 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DT80K4/BMG/TH Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4350 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor spe ...
Gear motor, electric motor, three-phase motor, electric gear motor -Output: Even speed 1420 rpm -Diameter shaft: Ø 18 mm -Output: Angle speed 32 rpm -Diameter shaft: Ø 32 mm -Power: 1.5 kW -Construction: B5 -Protection class: IP 44 -Dimensions: 620/260/H350 mm -Weight: 51 kg
Mikron M7500 + SpyGlass Attachment Optics Type M 7500 Year of construction 2010 Software: RTV-Control RT V2.2.16.11+ Camera Driver for M7500 G runs on Windows 10 NP: 18.000,- net Basic measuring range : 200- 700 °C - with all documents Affordable thermal imaging camera with modern Ethernet interface and remote control options for demanding Real-time applications Stationary process camera for industrial and industrial Scientific applications
wire electrode, welding wire, welding wire -metal powder -cored wire -Net weight: 15 kg -Number: 87x packages available -Price: per package -Weight complete: 15.6 kg/package
Clamping plate, welding table, welding table, straightening plate, workbench, work table -Diameter: 700 mm -Height: 810 mm adjustable -Sheet thickness: 19 mm -Number: 1 table available -Price: per piece -Weight: 88 kg/piece
Transnorm conveyor belt GF 3800-700-600 RA2207 Technical data: Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...
Transnorm conveyor belt GF 4800-700-600 RA2203 Technical data: Conveyor length (NL): 4800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s ...
Transnorm Rising falling Incline with arch and forerun belt conveyor GF 7600-700-600 RA2101 Technical data: Conveyor length (NL): 7600 mm (800 mm forerun + 6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7600 Nominal / outside width ...
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.37kw -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 490/261/H300 mm -Weight: 38kg
maximum number of results exceeded
please refine your search
