kimer 28 96 used for sale

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt -Conveyor belt: conveyor belt, VA housing -Speed: 8 m/min -Conveyor belt width: 280 mm -Conveyor belt length: 3490 mm, dimensions see technical photo. drawing -Outlet height: approx. 535 mm, height adjustable -Individual components: see photos -Total dimensions: 3500/590/H670 mm -Weight: 81 kg

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: with tilting function, solid design -Speed: 14 m/min -Roll width: 1200 mm -Roll diameter: 108 mm -Axle distance: 150 mm -Conveyor length: approx. 2800 mm -Tilt function: hydraulic, approx. 20° -Total dimensions: 3100/2300/H2000 mm -Weight: 1390 kg

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley with pressure flag -Type: 280 -Outer pulley diameter: 296 mm -Hole: Ø38 x 160 mm -Dimensions: Ø296 x 165 mm -Weight: 7,6 kg

roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: with tilting function, without hydraulic unit -Drive motor: kW rpm -Speed: 14 m/min -Roll width: 1200 mm -Roll diameter: 110 mm -Axle distance: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Total dimensions: 3100/2300/H2000 mm -Weight: 1180 kg

electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 280S/M-02 -Power: 90 kW -Speed: 2970 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 55 -Quantity: 1 electric motor available Price: per piece -Dimensions: 1070/560/H745 mm -Weight: 692 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Type: unfortunately no type designation -Engine designation: 1994.12.26 BB61B698H VDO36SB -Total dimensions: Ø 287 x 135 mm -Weight: 4.6 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, extraction blower -Manufacturer: Piller, radial fan pressure blower -Motor: ABB Type M2AA90S-2 -Engine power: 1.5 kW / 2870 rpm -Connection input: Ø 115 mm -Connection output: 100 x 60 mm, distributor 2x Ø49 mm / 1x Ø 34 mm -Dimensions: 870/365/H665 mm -Weight: 50 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm -Weight: 4.4 kg

Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 280 MV4 Y4 Q4 -Power: 90 kW -Speed: 1480 rpm -Shaft: Ø 75 x 110 mm -Protection class: IP54 -Design: B3 -Quantity: 1 piece available -Price: per piece -Dimensions: 1050/560/H685 mm -Weight: 644 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts, milling holder, collet chuck, reducing sleeves, attachment holder, thread quick-change insert -Manufacturer: Bilz, thread quick-change insert 5 pieces -Type: WE 3 12x9 / WE 3 16x12 / WE 3 20x16 / WE 3 25x20 / WE 3 28x22 -Design/Size: see photos -Price/Delivery: complete -Transport dimensions: 220/140/H75 mm -Weight: 3.8 kg

Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: Grinding wheel puller -Dimensions: see photos -Dimensions: 280/80/H185 mm -Weight: 8.3 kg

Workbench, work table, assembly bench, assembly table, work table -Workbench: with vise / solid construction with drawers -Worktop: Steel plate, length 2875 mm -Base cabinet: 3 removable doors, 13 drawers / layout/height see photos -Vise: Jaws 150 x 28 mm, clamping range 205 mm -Transport dimensions: 2875/1090/H1160 mm -Weight: 701 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 280 mm -Max. height: 468 mm -Submission/Price: complete -Dimensions (each): 220/190/H280 mm -Weight: 9.9 kg/piece

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Manufacturer: Hymmen, Type: JPT LW 2200/280, Operating system: Windowx XP, Software: K-Flow, Hardware: yes, AV Arbeitsplatz: yes, Bedruckbares Material: Papier,MDF,Kork, Working hight mm: 900, Nennbreite mm: 2300, Eff. Nutzbreite: 2100, Through running hight mm: max 50, Druckgeschwinidigkeit m/min : 25 (bei 360dpi), Anlagengeschwindigkeit m/min: 15-50, Single pass: yes, Year: 2010, Bedruckbares Material: Papier,MDF,Kork, Papiere: Rollenmaterial, Papierbreite min-max: 600-2100, Papiergewichte g/m²: 60-120, Papierrollendurchmesser max.: 800, Rapportlänge mm: 2600, MDF/HDF: yes, Fussbodendielen: yes, Werckstückdicke min-max mm: 5-17, Plattenbreite min-max mm: 500-2100, Plattenlänge min- max mm: 500-3000, Plattenwelligkeit mm: 3, Fussbodendielen: yes, Dicken mm min-max: 5-17, Längen mm min-max: 500-4500, Breiten mm min-max: 90-400, Welligkeit mm : 3, Tinten UV härtend: yes, Rollena ...

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

x-travel: 1200 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 turning speed range: 0 - 6.300 U/min spindle taper ISO: 40 total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4 x 3 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Key data: 180 KW, 223 kVA, 400 V

MDE Gas Generator (CHP) MBK 2876 LN Sewage gas electricity and heat generator from 2001 with unknown operating hours, control has defect. 173 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: MDE Model: MBK 2876 LN Type: Natural Gas Electricity and Heat Generator Serial number: E 20464 Power [KWel]: 173 Power [KWth]: 289 Voltage [V]: 400 Current [A]: 346 Frequency [Hz]: 50 Engine: MDE BK 2876 LN – sewage gas Engine power [KW]: 180 Year of Make: 2001 Operating hours: unknown Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 1.90 x 2.20 AC Generator Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: Leroy Somer Model: LSA K46.1 VL12TR C11/4 Type: AC Synchronous Generator Serial number: DJ07B532/02 Power [KVA]: 223 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 321 Speed [1/min]: 1,500 Year of Make: 2001 We ...

Older, but powerful MIAG fan type GL360° 106 m³ /min 730 mm water column 22 kw V-belt drive Suction ø 329 mm In: Transition ø 400 mm with air flap From: 280 x 210 mm Transition ø 400 mm Maintenance and test run carried out in our specialist workshop

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150 μm Focus diamete ...

Unit 1 - Geiss CNC FZ 2800 x 1000 - Year of Manufacture: 2013 - Total Weight: 42.05 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 25.62 kW - Rated Current: 37 Amp - Certification: CE Unit 2 - Geiss CNC FZ 2000 x 1000 - Year of Manufacture: 2012 - Total Weight: 30.22 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 24.72 kW - Rated Current: 36 Amp - Certification: CE Find more here - / Contact us at -

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

Suction nozzle diameter: 200mm; Nominal volume flow: 2800 m³/h; Scout bag volume: 2 x 120 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1500 x 500 x 2100 mm (L x W x H); Weight: 53 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick-release fasteners for filter and chip bagFine filter bag double-woven

Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal volume flow: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motorized; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating dust in the cyclone separator and cartridge filter Effective cartridge filter with a large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Included

English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible.

: 150 kg weight: ca. 70 kg dimensions: ca. 940 x 500 x 800 mm SEMI-AUTOMATIC Continuously adjustable strap tension: 5–500 N Up to 15 strapping cycles per minute Strapping triggered automatically when the strap is inserted or via foot pedal Heat-sealed closure Load capacity: 150 kg Minimum product dimensions (W x H): 45 × 20 mm Height-adjustable · Ergonomic operation Clear control panel, · Easy operation from both sides No protruding controls · Strap tension adjustable via the keypad Finely adjustable strap tension from 5–500 N Strap widths 6, 9, 12 mm · Versatile application Easy access · Tape spool can be replaced quickly and easily The drive motor runs only during the strapping process · Energy-saving The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC controls SIEMENS 840 D SL ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 5200 kg Microfinishing machine type Microstar 284 in vertical design with 8 workpiece holders and 4 microfinishing units for machining slide and counter ring grinding. -11000 houers Workpiece spindles: 8 piecesSpeed max 2000 rpmNumber of finishing units 4 piecesmax. speed 10000 rpmmax workpiece length 160 mmLoading height 1200 mm

cutting diameter: 250 mm dimensions of saw-blade: 450 x 45 x 2,0 mm cutting width: 280 x 200 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: square: 170 x 200 mm cutting speed: 16- 32 m/min power requirement: 1,3 kW dimensions: 1,3 x 0,55 x 1,0 m weight: 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mm capacity 90 degrees: flat: 280 x 160 mm capacity 90 degrees: square: 240 x 240 mm band length: 425 x 40 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: flat: 150 x 250 mm capacity 45 degrees: square: 170 x 170 mm total power requirement: 1,8 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,4 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device on rail chassis -Drive motor: -Load capacity: 3500 kg -Roller spacing: 280 - 1230 mm -Rollers: Ø 255 x 50 mm -Rolling speed: 0.0 to 0.75 m/min Right/Left rotation, Left rotation -Control unit: with hand control and foot pedal -Individual components: see photos -Transport dimensions: 1205/2330/H1010 mm -Weight: 830 kg

height: 2800 mm width: 900 mm depth: 1200 mm thread: M 24 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Consisting of:, Marel Townsend sausage peeler, Type: Peeler BL 2800, Serial number: 10145585, Year of construction: 2015, Capacity: 225 m/min, Diameter: 13 - 41 mm, Steam: 1.7 - 3.4 Bar, 78 kg/h, Compressed air: 7 Bar, Power: 3 x 380V, 50Hz, 3.8kW, Dimensions: 900 x 600 x 1600 mm, Weight: 340 kg, Marel Townsend blower unit, Type: Blower 2800, Serial number: 10394495, Year of construction: 2017, Blower: Russo SKV-NS-420-3-826, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 1400 x 700 x 1200 mm, Weight: 180 kg

Information: - little used (as good as new) - Saw blade diameter 750 mm - Swivel height adjustment infinitely adjustable - Roller conveyor front 2,500 mm - With aluminium stop profile 3,000 mm - With rear support roller conveyor

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 € : 181.81 € : Schwenkrahmen : 2450x27x0,9 mm : 35/70 m/min : 220 mm : 200 mm : 250x150 mm : rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm : 0.7 kW : 1330 mm : 1300 mm : 1880 mm : 350 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent utomatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. OPTION: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - th ...

General SKU212U184 LocationBarneveld Main Features Motor5.6 KW Length2870 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Tube-typecheck Diameter390 mm Length2870 mm Between inlet and outlet2400 mm Shaft diameter160 mm Pitch155 mm Inlet350 mm Outlet350 mm Motor5,6 kW 380 Volt (Ex) Screw speed120 rpm Information Makeunknown: missing type plate Floorspace4,4x0,7 m Total height0,7 m Weight820 kg ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalRubberAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyOther chemicalS ...

Single-knife veneer cutting machine JOSTING EFS 2800, built in 1975, very good used condition, in use until 02/2026, Spare blade Price from location

turning diameter:570 mm turning length:- mm control:- Diameter of rotation above the bed slide:360 mm Maximum width:2.000 mm revolutions per minute:max. 2500 U/min :11 kW max. longitudinal feed:7,5 m/min max. transverse feed:7,5 m/min rapid traverse longitudinal:12 m/min rapid traverse cross:15 m/min Pinole diameter:95 mm Pinolenhub:220 mm Pinolen intake: MK 5 weight of the machine ca.:2,97 t dimensions of the machine ca.:3,8m x 1,3m x 2m m Technical description: - Tool turret - automatic - 8-fold (see also options) - CAPTO Revolver Disc - Machine bed - made of perlite casting GG-26 - high stiffness due to strong ribbing - Bed slides - guideways hardened and ground - automatic lubrication of the bed rail - Reitstock - manual - Quick clamp - Operator station - two movable handwheels on the operator panel - a movable handwheel - Control - "Siemens 828 D" CNC control - Siemens "Comfort" (in ...

Pressure:080 t throat:280 mm stroke:20 - 120 mm no. of strokes:42 - 125 /min distance table/ram, max. stroke up, adjustment up:510 mm table surface area:700 x 560 mm hole in the table:280 mm table height over floor:800 mm passage to the back:320 mm ram surface:560 x 350 mm ram adjustment:72 mm Weight:5,2 t Dimensions (WxDxH):1,6 x 1,6 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

MSK Used Pallet Wrapper 2015 The MSK pallet wrapper machine, model 2801, manufactured by MSK Convertech in 2015, is available in excellent condition. It comes complete with safety guards and manuals, making it an ideal choice for covering and shrink wrapping plastic film over pallets filled with products. In addition, you can take advantage of an extra benefit: 134 additional rolls of 6 mil LLDPE are available for optimal packaging of your products. Not only will you get a reliable packaging solution, but you’ll also have the peace of mind of having spare parts available for any future needs. Rely on the quality of the MSK machine to achieve precise and efficient coverage and shrink wrapping for your pallets. Choose the machine that offers safety, reliability, and excellent condition. Contact us today for more information on this stand-alone MSK shrink wrap machine and to discuss yo ...

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining Capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axle speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-46801-41