129,264 used machines on RESALE, but how to find them? Machine Search
Belt width 315 mm Belt, white Radius of belt inside 135 mm / outside 450 mm Height of belt approx. 820 mm, adjustable Drive SEW SF 40 0.37 kW 240/400V variable speed gearbox 1:11.88
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 320 mm -Type: B2-63/28x320 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm / retracted distance 595 mm -Dimensions: 695/87/H145 mm -Weight: 14.3 kg
turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 800 mm turning speed range: 26 - 2000 U/min spindle bore: 24 mm total power requirement: 0,8 / 1,6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,60 0,70 1,20 m 1. Hand - School Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 63 mm -Type: B1-63/28x63/0 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm -Dimensions: 330/88/H95 mm -Weight: 7.0 kg
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg
A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.
Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...
Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece
cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.4 m, Overall length= 0.7 m, Overall width= 2.15 m, Net weight= 365 kg,
Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Dimensions: 430/400/H360 mm -Weight: 99 kg
Electric motor ABB 75KW 1485 rpm ABB type designation: M3BP 280SMA 4 Frequency: 50 Hz Voltage: 400V Power: 75Kw Speed: 1485 Current: 134A Efficiency: 94.50% Torque: 482.00 N · m IS / IN: 6.90 Number of poles (high): 4 foot opening: length: 425mm width: 460 mm net engine weight: 625 kg
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - ...
Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis made from forklift truck -Type: unfortunately without a type designation -Hole: Ø 260 mm, dimensions see photos -Wheels: Ø 282 x 100 mm dual tires -Price/Sale: complete -Dimensions: 430/400/H360 mm -Weight: 99 kg
Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 x 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 x 110 mm capacity 60 degrees: flat: 110 x 110 mm vice: 285 mm turning speed range:: 36 + 72 m/min dimensions of saw-band: 2950 x 27 x 0.9 mm Control: MEP NC coolant tank: 95.0 l total power requirement: 1.5 / 1.8 kW weight of the machine ca.: 435 kg dimensions of the machine ca.: 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions Front right, rotatable - Optional manual or automatic saw bow lowering Continuously adjustable saw bow lowering - Saw blade guide made of carbide ...
table length: 1200 mm table width: 800 mm weight: 177 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg
Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/24DC/2.5 Ord.No.: 2866268 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 130/30/H120 mm -Weight: 0.6 kg
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow loweri ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 x 180 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 x 110 mm capacity 60 degrees: round: 120 mm vice: 285 mm turning speed range:: 36 / 72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 370 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - co ...
punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - movi ...
Used fluidised bed dryer mady by Bühler, model OTWG-280, new 1995. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
workpiece diameter nominal: 2400 mm max. workpiece diameter: 2800 mm max. module: 30 mm control: Siemens Sinumerik 840 D dividing plate diameter: 2200 mm table diameter: 2500 mm Table hole Diameter / depth: 800 / 875 mm max. table load: 40000 kg Table rpm: 4,5 min-1 clamping length max.: 375 mm clamping diameter max.: 350 mm cutter diameter max.: 2800 mm Cutter arbor cone: HSK-B160 swivelling range milling head: + 30/-45° Distance Cutter - Workpiece: 615 / 1600 mm weight of the machine ca.: 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe Type: Alpha 2800 XS Manufacturer: Colchester Year: 2011 Control: Fanuc Series 21i-TB Spindle bore: 120 mm Swing over bed: 800 mm Swing over support: 520 mm Max turning length: 1500 mm Machine in good condition, under power Find more here - / Contact us at -
Geared motor, electric motor, three-phase motor -Speed: 29/117 rpm -Power: 0.06/0.25 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 20 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg
Lippert belt conveyor GF 2855-550-400 RA1649 Technical data: Conveying length (NL): 2855 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2855 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...
geared motor, electric motor -Speed: 88 rpm -Power: 2.2 kW -Design: B5 -Recess: Ø130 mm -Bolt circle: Ø 165 mm -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg
Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg
CTP plate setter Advantage DL+ Plate developing machine VPP 68 Find more here - / Contact us at -
used
Unwinding 2 flexographic printing units 2 UV drying 1 Screen print 2 punching unit Mesh winder Train station Reel Printing Accessories: Pressure cylinders, magnetic cylinders, anilox
cutting diameter: 280 mm band length: 450 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 280 x 160 mm capacity 45 degrees: round: 180 mm dimensions of saw-blade: 450 x 40 x 2.0 mm engine output: 2.6 kW height of material-table: 500 mm weight of the machine ca.: 495 kg range L-W-H: 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg
Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG eco 2800 K complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 30 – 280 amps Duty cycle 30% ED at 280 amps 60% ED at 210 amps 100% ED at 180 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 97 kg Age 12 months Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of ...
Offer 25301 Specifications: - Cutting range at 90° around 280 mm - Square 280 x 280 mm - at 45° around 240 mm - Square 210 x 210 mm - Saw blade dimensions 3400 x 27 x 0.9 mm - Cutting speeds infinitely variable 20 to 100 m/min - Hydr. Raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 to 10 m/min - Total drive power 400 V / 1.7 kW - Coolant device -Attack - Space requirement approx. W 900 x H 1100 x D 1800 mm - Weight approx. 550 kg
three-phase motor, electric motor -Condition: unused -Engine data: -Power: 75 kW -Speed: 2970 rpm -Voltage: 380-420 V (delta-star) -Protection class: IP54 -Type: B3-B5 -Shaft: Ø 65 mm -further data see photo type plate -Dimensions: 1030/770/H600 mm -Weight: 610 kg
Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG
Manufacturer: Thielenhaus Model: MicroStar 284 Year of Manufacture: 2020 ( unit 1 ) 2018 ( unit 2) Power Supply: 3-phase (3~) Frequency: 50 Hz Operating Voltage: 400 V Rated Current: 48 A Control Voltage: 230 V / 24 VDC Main Fuse Rating: 63 A Certification: CE Find more here - / Contact us at -
General SKU254S1022 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 280/50/1 WBN No.78154 Year of construction2015 Pressure Pressure buildup0.005 Bar Main Features Capacity7.8 m3/Min Motor0.55 KW Pressure0.005 Bar Specified Features - Blower Blowercheck Capacity472 m3/h (total increase of pressure 510 Pa, density 1,197 Kg/m3) Motor0.55 kW 220-240/380-420 Volt Inletdia 135mm Outletdia. 105mm MaterialMild steel Information Total height1,0 M Weight120 Kg CEcheck Floorspace0,6x0,5 MBlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
; Gross weight [kg]: 2600; Inspection Date: 2025-10-22; Amount of previous owners: 1; Maximum lift capacity [kg]: 200
Engine Brand: VOLVO, Condition: USED, Nominal Power @ Nominal Rpm: 206 Kw, Bore: 108 mm, Stroke: 130 mm, Engine Capacity: 7100 cc, Qty Cylinders: 6 Qty, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: No Starter Present , Rated Power: 188 Kw, Rated Speed: 2800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d7e-280-used/27, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: D7E 280; Transport weight [kg]: 1000
maximum number of results exceeded
please refine your search
