kimer 28 96 used for sale

Tool magazine Tool stations 80 pieces Maximum tool weight: 25 kg Maximum tool length: 500 mm Maximum tool diameter: 228 mm NC Rotary Table Division: 360,000 × 0.001° Swivel range: 360° Pallet changing system Pallet dimensions: 630 × 630 mm Coolant Setup Coolant pressure 50 bar Auction-ID: A1-44728-5

Network Switch CISCO Systems SG300-28P, 28 Port Gigabit Switch

Sales shelves Tegometall L-shape approx. 2800x65x300cm (WxDxH), colour white/ grey, rear wall panels white closed with cable grommets, incl. contra-angle handpieces 45 degrees, no shelf supports, screwed to parts of the building, without sales goods

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg

Electric motor, three-phase motor -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 7,8 kg

Sewing machine motor, lighting current motor, electric motor -Manufacturer: Pfaff, sewing machine motor type PCD 321 -Power: 0.245 kW -Speed: 2800 rpm -Voltage: 220/380 V 50 Hz -Shaft: conical Ø 11/15 x 21 mm -Sewing light connection: 12 V 15 W -Dimensions: 340/190/H320 mm -Weight: 19 kg

Gear motor, electric motor -Manufacturer gearbox Motovario type: NMRV040 -Manufacturer engine Seipee type: ZKF71C2.4 -Speed: 282/566 rpm -Power: 0.37/0.55 kW -Construction: B14 angle -Diameter hollow shaft: Ø 18 mm -Protection class: IP 54 -Brake -Dimensions: 430/160/H185 mm -Weight: 14.3 kg

Electric motor, three-phase motor with 2 speeds -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 3/4 kW -Speed: 1420/2830 rpm -Shaft: Ø 30 mm -Wavelength: 75/185 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 545/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor with 2 speeds -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Power: 3/4 kW -Speed: 1420/2830 rpm -Shaft: Ø 30 mm -Wavelength: 75/145 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 545/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Number: 2x available -Price: per piece -Dimensions: 540/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Transfer in current condition as seen -The foot is broken in one place -Electric motor: with 2 shaft outputs -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

Three-phase motor, electric motor -Motor is for a Ehemann grinder -Electric motor: with 2 shaft outputs -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 600/335/H270 mm -Weight: 48 kg

Fan, ventilator, electric motor, blower, axial high-performance fan -Manufacturer:Helios, axial fan axial fan suction fan -Power: 1.1 kW 2890 rpm / 1.1 kW 2880 rpm -Fan: Ø 400 mm -Number: 7x fans available -Price: per piece -Dimensions: 610/350/H610 mm / 635/350/H635 mm -Weight: 28 kg/piece / 32 kg/piece

Geared motor, electric motor, electric geared motor, spur geared motor, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor -Type RF07 DRS71S4/MM03 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 25 to 280 rpm / i= 11.18 -Power: 0.37/0.074 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 360/250/H180 mm -Weight: 10 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo -Speed: 2820 rpm -Power: 0.55 kW -Protection class: IP 54 -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg

Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower, radial fan -Engine: Katt type 806 419 0.25 kW -Speed: 2840 rpm -Volume output: /min -Fan wheel: Ø 175 x 130 mm -Inlet connection: Ø 125 mm -Air duct connection: Pipe connection 135 x 60 mm -Dimensions: 360/290/H265 mm -Weight: 9.3 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Motor: Besel type SKG71-2B 0.55 kW -Speed: 2810 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 170 x 50 mm -Connection input: Ø 85 mm -Connection output: 60 x 75 mm -Dimensions: 350/300/H260 mm -Weight: 11.5 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3107-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5860 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 630/220/H280 mm -Weight: 50 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm -Dimensions: 665/233/H235 mm -Weight: 48 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA20 Z -Power: 50 Hz 1.25 kW 2880 rpm / 100 Hz 2.0 kW 5885 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 200 x 3.2 mm -Dimensions: 390/300/H220 mm -Weight: 36 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA99 -Power: 50 Hz 1.6 kW 2845 rpm / 100 Hz 2.8 kW 5790 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 190 mm -Dimensions: 395/210/H200 mm -Weight: 25 kg

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sa-2 -Power: 5.5 kW -Speed: 2890 rpm -Shaft: Ø 38 x 65 mm -Design: B5 -Protection class: IP 54/55 -Number: 2x available -Price: per piece -Dimensions: 430/300/H250 mm -Weight: 36 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132S/2A -Power: 7.5 kW -Speed: 2880 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Number: 7x available -Price: per piece -Dimensions: 447/310/H250 mm / 450/340/H270 mm -Weight: 51 kg / 63 kg

Electric motor, three-phase motor -Condition: unused -Power: 5.5 KW -Speed: 2840 rpm -Shaft: Ø 28 mm -Design: B3/B5 -Protection rating: IP 54 -Flange recess: 180 mm -Flange hole circle: 215 mm -Flange outside diameter: 250 mm -Foot holes: 190 x 140 mm -Price per piece -Pieces: 21x available AEG -Pieces: 18x available ECO Air -Piece: 25x available ECO Air without fan wheel -Dimensions: 370/270/H250 mm -Weight: 30kg

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 3 sets of intermediate trusses IPE 240; 2 sets of IPE 180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41454-11

Concrete floor sander SPE DFG 280 Adjustable handle Motor 220v 1410rpm Mounting with a new disc A second new disc in addition Auction-ID: A1-44895-7

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3681

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3584

Works perfectly, very very little served Auction-ID: A3-43507-36984

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HhpvoS_ydmE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery:27/08/2013 48V 500Ah, very good performance measured with 50.0V - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - White non-marking tires - Warning light orange - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-139

Set of 10 Vaillant ecoTEC Pro VCW 286/5-3 gas condensing boilers – new – kits included Set including 10 wall-mounted gas condensing boilers from Vaillant, model ecoTEC Pro VCW 286/5-3 (E-BE). Combi boilers for heating and domestic hot water production, suitable for residential installations. Status : New Never used Never unpacked (original packaging) Included : Mounting Kits (present) Technical data (indicative) : Type: wall-mounted gas condensing boiler Model: VCW 286/5-3 Series: ecoTEC Pro Power: approx. 24 kW (heating) / 28 kW (DHW) Hot water flow rate: approx. 13–14 L/min (≈ 0.8 m³/h) Power supply: 230 V single-phase – 50 Hz Function: heating + domestic hot water (instantaneous production, without tank) Notes : Sale in a single lot (10 units) Untested products (new in packaging) Year: not communicated (according to model ± 2015–2021) E-BE versio ...

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3682

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-456

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining Capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axle speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-45443-41

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-457

Extraction system for woodworking, Riedex MD-280B, year of construction 2018. Auction-ID: A1-41991-17

Mateng RFMax 280 – front and rear mulcher (new machine built in 2025) For sale is a new Mateng RFMax 280 front and rear flail mower. General data • Machine type: Front / rear mulcher • Manufacturer: Mateng • Model: RFMax 280 • Year of construction: 2025 • Working width: 2,750 mm • Overall width: approx. 2,995 mm • Weight: approx. 1,560 kg • Condition: New machine Technical equipment • Suitable for tractors from approx. 120–220 hp • Front and rear mounting possible • Hydraulic side shift (left 506 mm / right 614 mm) • PTO drive: 1,000 rpm • CMR gearbox with freewheel • Automatic belt tensioning • 5 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,192 rpm • Rotor Ø: 203 mm (with flail Ø 455 mm) • 24 mallets, staggered • Flail weight: approx. 1.2 kg • Hammer bolt M16 • Adjustabl ...

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-459

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-458

Refrigeration Dryer Atlas Copco FD 280 Air flow rate 16,800 l/min Manufacturer Atlas Copco Machine number AIF 094494 Type FD 280 Year of manufacture 2004 max. pressure 14.5 bar Power consumption 3.7 kW Delivery throughput 16,800 l/min Refrigerant R 404 A Compressed air connection 2 1/2 inches Test run carried out lxhxw 114x91x84 cm Weight 175 kg Loading costs 50,00 Euro Auction-ID: 04J-7Y3-1

2 UNITS/SETS OF LON0019 PACKED TOGETHER. A SINGLE LON0019 CORRESPONDS TO: Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0019 PACKED TOGETHER: 450 x 1100 x h300 mm - 76 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-214

2 UNITS/SETS OF LON0019 PACKED TOGETHER. A SINGLE LON0019 CORRESPONDS TO: Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0019 PACKED TOGETHER: 450 x 1100 x h300 mm - 76 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-61

lot consisting of 10x esPattio Bika nesting polypropylene design chair. Design by Ramos & Bassols. --- 1x Functionals Serener off grey design table -- light scratches in the tabletop, see photo. Auction-ID: A1-44654-122

UHN BPR 280 – Flail mower (new machine, year 2025) For sale is a new KUHN BPR 280 flail mower, manufactured in 2025. Robust construction for grassland, arable farming and set-aside areas. Technical data Manufacturer: KUHN Model: BPR 280 Year of Make: 2025 Working width: approx. 2.80 m Net weight: approx. 990 kg Mounting: Three-point Cat. II PTO drive Made by NOBILI for KUHN (Made in Italy) Equipment & Features Robust mulch housing with reinforced construction Large-dimensioned rotor with flail piece Height-adjustable back-up roller Side skids Front and rear protection with rubber skirts Solid bearing and drive unit Hydraulic side offset Maintenance-friendly design CE compliant Ideal for Grassland maintenance, stubble cultivation, catch crops, set-aside areas Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +4 ...

ZEISS Axiovert 200M, LSM 5 Live, MCU 28 Laser Microscope Fluorescence Untested from Laboratory Closure Accessories included Auction-ID: A7-45427-55

Brand SEW Eurodrive Type RF07 DT56L4/AND8 Voltage Volt 3 fase 400 volt Force KW 0,12 KW Rotational speed RPM 284 RPM Shaft size mm 20 mm Flens pasrand 80 mm Units in stock 1 Length 30.00cm Width 20.00cm Height 10.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-43157-456

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45506-226