kimer 14 56 used for sale

Brush segment Quick Snap, brush, plastic brush, nylon brush -Manufacturer: Tennant, brush, 20 nylon with plate unused Ovp -Type: 14967 Disco 20 D = 500 -Quantity: 2x brushes available -Price per piece -Dimension: Ø 500 x 110 mm -Weight: 6 kg / piece

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985

4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Elektra power 7.5 kW -Speed: 1435 rpm -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 1160/1900/H1770 mm -Weight: 390 kg

Planetary gear alpha, SP 140S-MF1-7-4G1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - Shaft D32mm, - centering D130mm - Output side for shaft D24mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

The scope of delivery includes: 01x Holder f. Push-through protection, used Material color: sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm

Bosch DMA 140D 3301-D, 1070077623-208, 670V-705V, 140A NP:13554,-€ Item condition: Used, in perfect condition R10B2_EK (BOR) Further operating devices - new and used - can be found in our shop! International shipping costs on request!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 25 mm -Stroke: 140 mm -Total length retracted: 425 mm -Admission: hole Ø 20 mm -Dimensions: 425/75/H155 mm -Weight: 9 kg

Booster pump, CR8-140 A-F-A-AUUV, 9,5m³/h, 120m, Grundfos, used Top Used Top! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer. The pump is in top condition. Electric motor Function guarantee! For parts from second hand we can not take over conventional guarantee and warranty. But we give you a function guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Technical data for the pallet rack traverse: Shelving system: Tegometall Type: CI The scope of delivery includes: 01x pallet rack traverse, used Material color: white Box profile: 130 x 50 mm Agraffe: 4 HK (hook) Truss type: ITG130|50 clear width: approx. 1,400 mm 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | Pcs.

Technical data for the wide-span rack beam: Shelving system: Jung Heinrich Type: G The scope of delivery includes: 01x Wide-span shelving beam, used Material colour: RAL 1007 yellow Z-profile: 50 x 30 mm Agraffe: 3 HK (hook) clear width: 2,145 mm 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | Pcs.

Board cutter - board shear Make Robust Model 1400 Year 1980's Cutting length 140 cm Details Iron cast table 100 cm, front lay+small cut device, back lay Available Direct

Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V140A max. Version: V.0.019 Original price: 13554,-€ Item condition: Used, in perfect condition More products of this category can be found in our extensive EBAY assortment. More plug-in cards - new and used - can be found in our shop! International shipping costs on request! Plug-in cards and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 25 mm -Tube: Ø outside 50 mm -Stroke: 140 mm -Total length: retracted 360 mm -Admission: hole Ø 20 mm -Dimensions: 360/50/H80 mm -Weight: 3.9 kg

1 used tracked mobile screener type Powerscreen-Turbo Chieftain 1400, built in 2003, with cable remote control, spare rollers, etc.

• Grinding chamber with gradation for large individual parts • Dimensions: 3400 x 3750 x 2400 mm • Performance: Long sanding belts 5500 x 100 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

Rolled lead, lead rolls, leadPlus, wound lead -Rolled lead: LeadPlus wound lead in rolls -Alloy: 710 -Roll: L x W x D: 150,000 x 145 x 0.45 mm -Quantity: 10 rolls available -Price: per roll -Weight: approx. 110 kg/roll

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

Machine vise, sturdy vise, drill vise -Jaw width: 140 mm -Back height: 40 mm -Clamping depth: 145 mm -Dimensions: 550/195/H105 mm -Weight: 39 kg

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Part: Keyboard type KS-YZ-14B Repair Service Reparatur Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Gratings, gratings, light grids, insert grilles, insert grilles -Dimensions: 1090 x 1110 mm -Total height: 140 mm -Longitudinal struts wall thickness: 2 mm - Gratings: Hot-dip galvanized -Weight: 40kg -Quantity: 1 piece available

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 145 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Dimensions: 570/345/H430 mm -Weight: 32 kg

Transnorm conveyor belt GF 14500-700-600 RA2147 Technical data: Conveyor length (NL): 14500 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14500 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed  ...

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 140 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: Ø 33/280 mm -Weight: 0.8 kg/piece

Complete used concrete block plant Fabr Henke with core and attachment lifting ladder lowering ladder vehicle group packager about 25 molds, batching plant, core concrete mixer, attachment mixer, paint dosing. The facility is very well maintained and in a condition that can be used directly. The facility can be visited at any time in consultation with us. More details on request.

Conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, belt belt, flat belt, drive belt -Width: 85 mm -Length: 14850 mm -Transport dimensions: 455/455/H85 mm -Weight: 19 kg

Henke Variant concrete block production plant, core and attachment Complete with lifting ladder, lowering ladder, vehicle group, drying rack, mixing plant, core and attachment mixer, aggregate silos, cement silos. The facility is very well maintained and ready for immediate use and can be visited at any time in consultation with us. For more information, please do not hesitate to contact us.

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 14 mm -Number: 6x couplings available -Price: per piece -Dimensions: Ø 142 x 120 mm -Weight: 7.4 kg/pc.

faceplate diameter: 1400 mm turning diameter over slide rest: 1400 mm centre distance: 1500 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Electric motor, three-phase motor -Power: 0.35/0.5 kW -Speed: 660/1325 rpm -Shaft: Ø 24 x 50 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 330/199/H230 mm -Weight: 10.3 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...