127,906 used machines on RESALE, but how to find them? Machine Search
MAN generator set 140 kVA incl. control cabinet + + - - - - - Engine: - Manufacturer: MAN (Germany) - Model: D2866E - 6 cylinders - Diesel - Water-cooled - 1500 rpm - Power: 170 hp - - - - - Generator - 140 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Hand start at the touch of a button - Automatic start function in the event of a power failure - Volt display - Hertz - Display - 3x Ampere display - 1x kW display (generator) - 1x kW display (mains) - Oil pressure gauge - Engine temperature display - Hour meter - - - - - Condition: - The generator set was installed in a company for power generation - It is in a used and functional condition - Regular maintenance and inspections were carried out - A test run was done - The engine runs, starts and runs well and the generator generates 400V and 50 Hz. - - - - - Scope of ...
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:3,200 mm Y-axis travel:1,400 mm Z-axis travel:900 mm X-axis rapid traverse:16 m/min Y-axis rapid traverse:20 m/min Rapid traverse: m/min Y-axis feed rate:10 m/min Z-axis feed rate:10 m/min Nominal (apparent) power:50 kVA Controller manufacturer:Fanuc α 30/3000i 7.0 Workpiece length (max.):4,000 mm Workpiece width (max.): max. 000 kg Total height: 4,500 mm Total length: 8,130 mm Total width: 4,150 mm Table width: 1,200 mm Table length: 3,200 mm Table load: 8,000 kg Total weight: 17,000 kg Maximum spindle speed: 8,000 rpm Diameter: 50 mm Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Equipment: documentation / manual, chip conveyor, infinitely adjustable speed
x-travel: 5000 mm y-travel: 2500 mm z-travel: 1500 mm : 50 m/min. : 9000/9000/6000 N : 15000 U/min : HSK 100 : 44 / 35 kW : 360 ° : +/- 110 ° : 5000 x 3000 mm control: Fidia C20 distance between columns: 4500 mm dist. milling spindle - table surface: mm total power requirement: - kVA : 38 t : - m Universal - CNC 5-axis - HIGH SPEED - Portal machining centre in GANTRY design - CNC control FIDIA C 20 - Milling head: T2K – Spindle MFW-1813/27/1 (HSK 100) – External coolant supply – Minimum quantity coolant dosing – Scraper conveyor – Ethernet connection – Hand-held control module - 5-position tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lokotrack LT140 Year of manufacture 1996 Crusher inlet 1400 x 1070 mm Converted to electric drive 200kW Machine in operational condition from a limestone quarry/cement plant 115 tons 4 Transports
sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 10000 mm swing diameter: 14000 mm turning height: 8000 mm Control: Siemens Sinumerik 840 D workpiece weight max.: 500 t faceplate turning speed range: 0,2 - 35 U/min drive motor: 300 kW ram head dimension: 600 x 600 mm max. ram stroke: 4000 mm milling drive: 100 kW hob turning speeds: 3000 U/min rapid traverse x + z axis: 10 m/min total power requirement: - kW weight of the machine ca.: 350 t Machine has never been used and is still original, seaworthy packed and stored. equipped with: - CNC control Siemens Sinumerik 840 D - Hydrostatic axes - Hydrostatic table - Milling device - Hirth couplings for tool holder Acessories: • VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164 • VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165 • HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163 • UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171 • HEAD DANDREA UT-8-800-S 8T5060166 • TOOL HO ...
: 15000 kg height: 790 - 1150 mm width: 1400 mm : ja : 790 - 1350 mm : 120 x 1400 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1400 mm Thickness: 200 mm : 650 total power requirement: . kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: . m 340 rpm Bolt circle: 330 mm Fit: 285 mm Jaw width: 55 mm Thickness: 170 mm Opening: 145 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
An aluminum die-casting machine is being sold. 140t Dimensions approx. H 370 L570 W 160cm Transport dimensions approx. H 370cm The system must be dismantled and transported away by the buyer himself. Plant is handed over without power. VAT is deductible Article location Nuremberg All information without guarantee
: 0460 mm : 1500 mm : : 230 mm : 78 mm : 400 mm : 2200 U/min : D1-8 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pressure: 14 bar Motor: 2,38 kW Free air delivery: 14 m³/min Measurement (WxHxD): 706 x 1064 x 1046 Weight: 145 kg Compressed air connection: 2
Pressure: 16 bar Motor: 2,1 kW Free air delivery: 14 m³/min Measurement (WxHxD): 580 x 880 x 790 Weight: 109 kg Compressed air connection: 2
Code: 0329 Brand: PAOLONI Model: T 140 CF - CE Standard Spindle moulder with sliding carriage for making joints in wood, plastics, composite materials and various – CE Standard Technical data Table dimensions 1300 x 652 mm Carriage mm 1300 x 240 – Carriage travel 1180 mm Max table opening 340 mm Table height 890 mm Spindle stroke 200 mm Interchangeable spindle diameter 40 mm Spindle speed rpm 3000/4500/6000/8000/10000 Motor power 7,5 Hp Suction inlet diameter 120 mm Overall dimensions mm 1300 x 900 x 1150 h Weight kg 630
An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible.
- Digital read out system position slides - 5 stones and flanches - Coolant and Filtration system - CE Mark - Levelling pads included - Full set off books
Various old small machines are available. 1) Lathe Colchester Chipmaster 5x20. 2) Multi-spindle drilling machine Steinel BGS 140. 3) Orbital riveting machine Steinel VS. 4) Hydraulic power unit Sauter HA1202. 5) Laminating machine Sallmetall. 6) Drum pump Flux F 407. 7) Hydraulic power unit Sauter HOV4. An on-site inspection is possible. A package sale is desired.
Manufacturer: Weightpack S.r.l., Goito (MN), Italy Model: WSFC 32/24/6 – 141 NH ESL Serial number: WL 0289 Year of manufacture: 2010 Type: Rotary filling line for high-hygiene dairy products Version: ESL – Extended Shelf Life 32 sterilization stations 24 filling stations Capacity: Sterilisation of containers using H₂O₂ Precise volumetric or gravimetric filling technology Max. 12,000 l/h for 1-litre format (see photo above) -> in practice, we produced at 7,000 l/h
We are selling here a blast freezer / blast chiller from the manufacturer IRINOX, type HC 142/70 in a very good used and functional condition. Runs on 400 volts, 5.4 kW, completely stainless steel, rollable, 14 shelves, digital control, programmable, internal dimensions W/D/H 65/54/100 cm, workshop tested, immediately ready for use, dimensions W/D/H 85/105/195 cm, others on request.
TRITURATORE MONOALBERO LUNGHEZZA ROTORE 1400 DIAMETRO ROTORE 450 MM NUMERO COLTELLI 76 COLTELLI DA 34 X 34 GRIGLIA DA 30 MM POTENZA 55 KW
IMPIANTO RIGRANULAZIONE BIVITE Taglio ad anello liquido Forties T 1000 anno 2016 Alimentazine forzata con quadro c. eletric
turning diameter over bed: 1450 mm turning diameter over slide rest: 950 mm turning length: 4000 mm centre height: 725 mm faceplate diameter: 1000 mm travel -x axis: 980 mm travel -z axis: 4000 mm workpiece weight: 2 to turning speed range: 1,5 - 1000 U/min spindle hollow: 500 mm Control: Siemens 828D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - CNC Control Siemens 828D - Front and Rear 1000mm dia. 4 – chucks - Tailstock - Chip Conveyor - Boring Bar 1500 mm x 120 mm - Boring Bar 1690 mm x 120 mm - Boring Bar 1000 mm x 80 mm - Boring Bar 1500 mm x 100 mm - Quantity of KM Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, desludge cyclone, control panel (original Alfa Laval), OWM valve with waterbox (original Alfa Laval), all inlet/outlet pipes, service tools for maintenance including pressing tool. Instruction manual available., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 4.950 rpm, Motor: 22 kW - 380 V - 60 Hz - 1.750 rpm - 40 A, Dimensions: 180 x 130 x 175 cm, Weight: 2.130 kg
Lift system, Megamat, shelf size: 2.24 x 0.61m, height approx. 4.26m, 360kg / shelf – used - : Price ex location: 15.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat / Kardex Year of Make: 2001 Type: Megalift 14436/50/4260 Device number: 70744 Max. load capacity per tray: 360kg Permissible total load: 40,000kg Device height: approx. 4.26m Width: approx. 2.45m Depth: approx. 2.45m Number of shelves approx. 60 pieces (still to be verified on Tuesday, 24.3.26) Dimensions shelves: approx. 2,248mm x 612mm 3/N/PE 230/400V, 12A, fuse supply cable 16A Condition: used Available: immediately Location: D-77728 Oppenau
spindle diameter: 140 mm x-travel: 6000 mm y-travel: 2400 mm w-axis: . mm ram: horizontal adjustment: . mm ram: diameter: 300 mm spindle taper ISO: 50 turning speeds: 3,15-800 U/min angular milling head: rotary table:: 2250x2250 mm table travel longitudinal: 1600 mm rotary table:: 2250x2250 mm table travel longitudinal: 1600 mm Optional worktop Optional: 2 Collet boring tables The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We loo ...
Work table AT 1400 with stainless steel top Work table Baker's table Stainless steel worktop with gallery at the back Bottom shelf Stainless steel version with 2 doors Approx. dimensions: 1400 x 800 x 850 mm, WxDxH Used device cleaned
ROTAZIONE BASTURNANTE STAMPO PARTE MOBILE - EUROMAP: 1400H-150/260
Glass Door Refrigerator K 140 with silent cooling Temperature adjustable from +2 to +10°C Gross capacity 130 litres with 2 grates with LED lighting Coolant R 600a only DGUV V3 tested by us Connection 230V, 100 Watt Dimensions: 560 x 600 x 850 mm, WxDxH Device as good as new
Stainless Steel Flushing Center 1400 Sink unit with base cabinet 1400 x 700 x 900 mm WxDxH 1x basin right, drainer left incl. standpipe valve and drain plug Dimensions: 1400 x 700 x 850/900 mm Stainless Steel Sink Center As Good As New!
working area:2500 mm Free moveable 6-axis measuring device - operating software - W-Lan - ball tracer
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Wood production line manufactured in 2017. This BURKLE Optima 1428/50 includes a continuous-action stack press with a pressing area of 1400 x 2800 mm and an automatic feeding system. It also features a robust panel rack and two tilting hoppers with a capacity of 1.5 m³. If you are looking to get high-quality door panel production capabilities, consider the BURKLE Optima 1428/50 machine we have for sale. Contact us for further details.
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
used
Stone production plant Fabr. OMAG Tronic S22 140-90 Year of manufacture 2005 Price against bid, as the space is needed elsewhere! - with core and intent = for the production of paving stones, slabs, kerbstones, L-stones, etc. Board size 1400 x 950 mm - Min. product height 40 mm - Max. product height 500 mm - compl. Circulation
Size: 1065 x 1660 mm Equipments: Air table Automatic jogger Plated stainless steel Table size: 1065 x 1660 mm Max sheet size: 1065 x 1660 mm
: gebraucht : 2416 B : China : 180 € : 1 : 140 mm : 50 mm : 147 mm : 15 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C Information No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerShell and tube heat exchangersNew arrivalsSondexHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Sondex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...
Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, Spiral drill bit Ø 148.5 mm/H7 -Recording: SK50 -Tool: double-edged -Dimensions: Ø 148.5 x 630 mm -Weight: 16.5 kg
Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 700mm -Cross section: 140 x 50 mm -Recording: 400 mm (see sketch in the photos) -Transport dimensions: 845/945/H140 mm -Weight: 186 kg
Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -FAG: Plummer block housing type SNV 140 -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece
Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs
maximum number of results exceeded
please refine your search
