kimer 14 56 used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 40 mm -Type: B1-32/14x40 TGL10906 -Piston rod: Ø 14 mm / M12 -Holes: Ø 20 mm -Dimensions: Ø 50 x 204 mm -Weight: 1.6 kg

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Centre height: 145 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 400/130/H380 mm -Weight: 13 kg.

General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C MaterialStainless steel 1.4404 (316L) General No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDai ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 700mm -Cross section: 140 x 50 mm -Recording: 400 mm (see sketch in the photos) -Transport dimensions: 845/945/H140 mm -Weight: 186 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 115/23 mm / 121° -Dimensions: see photo technical drawing -Dimensions: 140/130/H130 mm -Weight: 13.8 kg

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -FAG: Plummer block housing type SNV 140 -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Steering cylinder: stroke 144 mm -Piston rod: Ø 55 mm -Piston rod mounting: Ø 20 mm -Receiving holes: see photo technical drawing -Cylinder: outer Ø 105 mm -Dimensions: 510/155/H115 mm -Weight: 18 kg

Industrial vacuum cleaner, vacuum cleaner, dust extractor, industrial vacuum, floor vacuum, safety industrial vacuum, polyurethane hose, extraction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connectors, hand tube, hose connector, crevice nozzle -Manufacturer: Nilfisk, Crevice nozzle D32 L 153 Black, unused, original packaging -Type: 1470146500 -Conical nozzle: Ø 32 mm -Number: 2x nozzles available -Price: per piece -Minimum order quantity: complete -Dimensions: Ø 38 x 150 mm -Weight: 0.1 kg/piece

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 147 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 165/65/H42 mm -Weight: 2.2 kg/piece

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 167/56/H43 mm -Weight: 2.2 kg/piece

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/Outlet: Ø 39/39 mm -Part Number: 45 037 72 145 -Quantity: 1 air filter housings included -Price: per piece -Dimensions: Ø 173/165 mm -Weight: 1.8 kg

Bezel, moving bezel, steady rest, lynette -Bezel: max. aperture Ø 145 mm -Centre height: 190 mm -technical drawing: in the photos -Dimensions total: 310/115/H340 mm -Weight: 21.6 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21154 -Clamping plate with: a carriage with clamping device -Car dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm -Plate thickness: 35 mm -Plate height: 300 mm -Plate with: support ribs -Groove width: 52 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21153 -Width: 1465 mm -Length: 4930 mm -Working height: 860 mm -Plate thickness: 35 mm -Plate height: 315 mm -Plate with: support ribs -Groove width: 51 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm -Weight: 6155 kg

Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 7-groove pulley type SPA -V-belt width: 13 mm -Mounting: Taper bushing Ø42 x 125 mm (can be changed) -Dimensions: Ø143 x 125 mm -Weight: 9.5 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate: has a prism and scribing lines -1x Front side: with T-slot -Width: 1495 mm -Length: 3000 mm -Height: 302 mm -Sheet thickness: 80 mm -Plate: is equipped with supporting ribs -Number: 2x plates available -Price: per piece -Transport dimensions: 3170/1580/H302 mm -Weight: 2100 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor -Type: MAE 140 740-0140-140-007 -Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

Marking ruler, planing ruler, test ruler, straightening ruler, straightening beam, clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Inking ruler: 145 x 1515 mm -Dimensions: 145/1515/H265 mm -Weight: 99 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 140 mm -Length: 370 mm -Height: 53 mm -Threaded holes: M12 -Number: 4x milling support available -Price: per piece -Weight: 21 kg/piece

Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Number: 2x coolers available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: MK5 mount -Spindle size: Ø 120-140 mm -Dimensions: Ø 124 x 253 mm -Weight: 8.4 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 40/13 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 148/61/H48 mm -Weight: 2.8 kg

Drill bit, step chisel, drill bit for well drilling, core drill, core drilling machine, diamond drill bit, drill bit for well drilling machine -Drill bit: diamond core bit Ø 142 mm -Hole: Ø 125 mm -Dimensions: see photos -Dimensions: Ø 142 x 175 mm -Weight: 3.9 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: NCP Parker, control block with 12 solenoid valves -Magnet valve: Parker ZB16 12V DC 16W -Individual components: see photos -Dimensions: 230/215 / H130 mm -Weight: 5.5 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for press brake: divided 17 pieces -Tool: 30 ° -Dimensions: 145 x 35 mm -Total length: 2675 mm -Lengths: 7 x 250 mm / 1 x 175/170/90/85/80/75/70/65/60/55 mm each -Transport dimensions: 600/400 / H170 mm -Weight: 63.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders, lifting cylinders -Manufacturer: Schlie, hydraulic cylinder double-acting, stroke 147 mm -Type designation: LDG63 36 147 -Piston rod: Ø 36 mm -Sockets: Ø 35 mm -Cylinder: outside Ø 75 mm -Number: 2x cylinders available -Price per piece -Dimension: 530/75 / H150 mm -Weight: 10.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, pneumatic interface -Manufacturer: Siemens, Simatic S7 pneumatic interface orig -Type: 6ES7 148-1EH11-OXAO -Cardboard dimensions: 160/155/H60 mm -Weight: 0.5 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, pneumatic interface -Manufacturer: Siemens, Simatic S7 Pneumatic Interface -Type: 6ES7 148-1EH11-OXAO -Number: 3 modules available -Price: per piece -Dimensions: 150/145/H50 mm -Weight: 0.5 kg/pc.

Quick-release nut for balancing machine, clamping nut -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 2x quick-release nuts included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc.

Vibratory finishing machines Pre-filter system, filter system, pre-filter container, water filter for cylindrical vibrator, vibratory finishing machine, vibratory finishing system, vibratory finishing cylindrical vibrator, Trowal system, continuous vibrator -Pre-filter system: for vibratory finishing machines or others -Transport frame: mobile, with 2 filter inserts -Collection tank: volume approx. 350 litres -Total dimensions: 1400/620/H920 mm -Weight: 106 kg

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve -Manufacturer: Festo, pneumatic valve orig -Type: VL-5/3-G-1/4-B Mat. no. 14298 -Working pressure: 0.9 - 10 bar -Number: 2x valve available -Price per piece -Dimensions cardboard: 135/30/H50 mm -Weight: 0.4 kg/pc.

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Stahl, electric chain hoist with powered chassis -Equipment: without pendant control, without own control -Crane chassis: Type SU-A 1442 110 electrically driven -Beam width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main stroke: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5 m -Dimensions: see photo technical drawing -Transport dimensions: 1350/1030/H1000 mm -Weight: 136 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm -Weight: 10.8 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Stahl, electric chain hoist with powered chassis -Equipment: without pendant control, without own control -Crane chassis: Type SU-A 1442 110 electrically driven -Beam width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main stroke: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5 m -Dimensions: see photo technical drawing -Transport dimensions: 1350/1030/H1000 mm -Weight: 139 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from order picking truck Jungheinrich type EJE-KmS -Hydraulic pump: type 0 542 015 145 -with: tank and control valve -Dimensions: 180/160/H370 mm -Weight: 11 kg

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller -Manufacturer: Jungheinrich, swivel wheel from electric pallet truck EJE-KmS 16G-24-140-56 -Wheel size: Ø 96 mm / 100/40-75 -Dimensions: see photos -Number: 2x support rollers available - Price: per piece -Dimensions: 250/120/H135 mm -Weight: 5 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type 0 542 015 145 -Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump, hydraulic unit from Jungheinrich electric forklift type ECC 10 G 115-90 E -Hydraulic pump: Type 0 542 015 121 -Motor: Type 1 547 220 532 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 220/150/H520 mm -Weight: 10 kg/pc.

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from pedestrian stacker type EJE-KmS 16G-24-140-56 -Drive motor: 24 VDC / 1.5 kW -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1585/510/H265 mm -Weight: 82 kg/pc.

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: GSL (German Standard Lift), Gas spring, Gas pressure spring, 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/Fee: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/piece

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 140mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H415 mm -Weight: 66 kg/pc.

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Fanuc, AC Spindle Motor from Santenberg GTC S 2 CNC machining center -Type: A06B-1448-B200 -Technical data: see photo of the nameplate -Shaft: Ø 48 x 110 mm -Dimensions: 535/290/H335 mm -Weight: 100 kg