kimer 14 56 used for sale

Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step -Grating step: 1415 x 335 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Quantity: 1 piece available -Weight: 18 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 560 mm -Conveyor width: 1000 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1450/1350/H750 mm -Weight: 135 kg

Inv. Num. : 8874 Type: TRIATHLON 1487 V Producer: HOLZHER Created: 2003 Parameters: Binding height: 55 mm Machine dimensions: 7500 x 1300 x 1800 mm

Laboratory press for test plates, make RUCKS, built in 1998, 2 floors electrically heated, Press force 440 kN, max operating pressure 250 bar

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.

This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained.

Machine vice, stable vice, drill press vice -Machine vice: clamping jaws 150 x 50 mm -Clamping depth: 143 mm -Groove: 104 x 17 mm -Dimensions: 455/170/H125mm -Weight: 25 kg

Used Hermetic Press, Plate Press Manufacturer: OCEM Type: OPA 1440DS Year of Make: 1993 Molds included: 300x300/4, 400x400/2 Used hermetic press, concrete tile/slab/terrazzo press Manufacturer: OCEM Type: OPA 1440DS Year of manufacture: 1993 Includes moulds: 300x300/4, 400x400/2

This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information.

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

Gear motor, electric motor -Manufacturer: Eberhard Bauer, gear motor type DO 42 F 04/141 -Speed: 250 rpm -Power: 110 W / 2700 rpm -Shaft: Ø 10 x 25 mm -Design: B5 -Protection class: IP55 -Number: 4x motor available -Price per piece -Dimensions: 250/110/H110mm -Weight: 3.6 kg/piece

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D 166/1461 -Speed: 28 rpm -Power: 1.5 kW / 935 rpm -Voltage: 380/660 V -Shaft: Ø 50 x 110 mm -Dimensions: 720/320/H315mm -Weight: 88 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D 146/176 -Speed: 82 rpm -Power: 3 kW / 1410 rpm -Shaft: Ø 50 x 110 mm -Dimensions: 750/320/H325mm -Weight: 93 kg

Gearbox, spur gear, angle gear, worm gear -Manufacturer:Varvel, worm gear -Translation: i= 28 -Hollow shafts: Ø 24 x 100 mm / Ø 34 x 100 mm -Dimensions: 150/140/H170mm -Weight: 4 kg

Gearbox, bevel gear, worm gear -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: Ø 400x4.0x32 Z96 = T 11.95 -Speed: n max. 5000 rpm -Dimensions box: 480/460/H15 mm -Weight: 3.1 kg

This 3-axis MAHR MarSurf CD 140 CMM machine was manufactured in 2022. It features a contour probe system with a resolution of up to 6 nm and a traversing length from 0.1 mm to 140 mm. The machine supports a workpiece weight of up to 90 kg and offers adjustable measuring forces from 4 mN to 30 mN. If you are looking to get high-quality contour measuring capabilities, consider the MAHR MarSurf CD 140 machine we have for sale. Contact us for more information.

Transnorm conveyor belt GF 14000-600-500 RA2463 Technical data: Conveyor length (NL): 14000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller 1: Ø = 81 mm Belt return roller 2: Ø = 40 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor spe ...

This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information.

Screw pump Bornemann W8.4ZK-144, 4,5 bar, 896 m3/h, engine ABB 250 kW, 455A, 1486 r/m. Used for pumping fuel oil at the fuel terminal.

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 141 mm -Dimensions: see photo technical drawing -Dimensions: 157/72/H108 mm -Weight: 1.8 kg

This 6-axis ABB IRB 140 M2000 robot arm was manufactured in 2005. It is designed for flexible use in manufacturing facilities, featuring an open structure that easily adapts and communicates with external systems. Weighing 98kg, it operates quietly with noise emissions under 70 dB(A). Consider the opportunity to buy this ABB IRB 140 M2000 robot arm. Contact us for more information about this machine.

General SKU309S499 MakeApex Engineering Industries LTD. (UK) Type143 ASS - MK.VI No.A46248 Year of construction1996 LocationBarneveld Main Features MaterialStainless steel Motor0.75 KW Specified Features - Sieve granulator Granulating sievecheck With hoppercheck Inlet360x320 mm Outletdia. 150 mm Motor0,75 kW 230/400 V (Ex) With variable speed drivecheck MaterialStainless steel General Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,3x0,8 M Total height1,6 M Weight400Kg CEcheck ATEX designedcheck Extra Specificationssieve is missingPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicApexIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Che ...

General SKU268N300 MakeHeraeus Hanau TypeRVT 500 No.7805013 Year of construction1978 Mounted on framecheck Main Features MaterialAluminium Volume140 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 °C Number of compartments:1 Capacity140 Ltr Internal diameter485mm Internal depth750mm Electric heatingcheck Electric capacity2 kW 220 Volt Number of doors:1 With trayscheck MaterialAluminium General LocationBarneveld With switchcheck Floorspace1,0x0,7 M Total height1,6 M Weight150 KGConsumer wastePaints & coatingsPowdered foodsDrying ovensGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarDairyAnimal feedOther ...

General SKUR0159 LocationBarneveld CEcheck MakePink GmbH Thermosysteme Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialHastelloy Volume250 Ltr. Surface2.7 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface2,7 m² Drying chamber sizes670x670x140mm (4x) With jacketcheck Max. temperature115 degr. C Number of trays4 Tray sizes670x670mm Distance between the trays140mm Max. temperature115 degr.C With containers4x Container sizes650x650x40mm With 1 doorcheck MaterialStainless steel 2.4602 (Hastelloy C-22) With jacketcheck General TypeVSD-EX 650-650-140-4 Machine number2005 4783 Year of construction2005 With switchgearcheck Floorspace1,6x1,2 M Total height2,3 M Weight1400 KgPaints & coatingsPowdered foodsGeneric medicinesTray dryersTea, herbs & coffeeFine  ...

Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven

Recessed light -Manufacturer: SBF, recessed light -Type: SLK63 8602162 -Voltage: 16.8-143 VDC -Connection: see photos -Quantity: 1 light fixture available -Dimensions: 105/100/H45 mm -Weight: 0.2 kg

An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible.

General SKU213T166 LocationBarneveld CEcheck MakeKSB Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume6000 Ltr. Motor1.85 KW Specified Features - Centrifugal Pump Number of pumps:1 Capacity6 m³/h With motor1.85 kW (400 V, 1450 rpm (Ex)) Centrifugal Pumps MaterialStainless steel General TypeVAB050-040-1150302MDBQ72LE Mach.No.997339226800010001 Year of construction2016 Floorspace0,4 x 0,6 m Total height0,5 m Weight100 kg Extra SpecificationsH=25 mOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustrie ...

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 166/57/H115 mm -Weight: 1.7 kg/pc.

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible.

Volvo generator set 145 kVA with tank + exhaust / silencer - - - - - Engine: - Volvo (Sweden) - Model: TD100A - 6 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator - A. van Kaick (Germany) - 145 kVA - 230 / 400 volts - 50 Hertz - - - - - Start Unit: - Ignition lock - Engine temperature display - Oil pressure gauge - Emergency stop switch - - - - - Condition: - The generator set is in a used and functional condition - It was used for occasional uses - A test run was done - The engine runs well and the generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Volvo generator set 145 kVA - With starting unit - Tank (with installed on the frame) - Large exhaust / silencer - - - - - Shipping: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please ...

BILLION Hercule 140 T Injection Moulding Machine Injection group: H470 Clamping force: 140 T Screw diameter: 40 mm Injectable volume: 220 cm3 Injection pressure: 2100 bar L/D Ratio: 23.5 Distance between columns: 515 x 515 mm Distance between columns: 735 x 735 mm Min/max mold thickness: 240-480 mm Opening stroke: 500 mm Engine power: 18.5 KW Heating power: 9.60 KW Dimensions: 5.10 x 1.80 x 2.25 m Weight: 6.8 T

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

MAN generator set 140 kVA incl. control cabinet + + - - - - - Engine: - Manufacturer: MAN (Germany) - Model: D2866E - 6 cylinders - Diesel - Water-cooled - 1500 rpm - Power: 170 hp - - - - - Generator - 140 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Hand start at the touch of a button - Automatic start function in the event of a power failure - Volt display - Hertz - Display - 3x Ampere display - 1x kW display (generator) - 1x kW display (mains) - Oil pressure gauge - Engine temperature display - Hour meter - - - - - Condition: - The generator set was installed in a company for power generation - It is in a used and functional condition - Regular maintenance and inspections were carried out - A test run was done - The engine runs, starts and runs well and the generator generates 400V and 50 Hz. - - - - - Scope of ...

Bicone dryer manufactured by LLEAL, model SBC-1400.

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mm turning diameter over slide rest: 950 mm turning length: 4000 mm centre height: 725 mm faceplate diameter: 1000 mm travel -x axis: 980 mm travel -z axis: 4000 mm workpiece weight: 2 to turning speed range: 1,5 - 1000 U/min spindle hollow: 500 mm Control: Siemens 828D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - CNC Control Siemens 828D - Front and Rear 1000mm dia. 4 – chucks - Tailstock - Chip Conveyor - Boring Bar 1500 mm x 120 mm - Boring Bar 1690 mm x 120 mm - Boring Bar 1000 mm x 80 mm - Boring Bar 1500 mm x 100 mm - Quantity of KM Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, desludge cyclone, control panel (original Alfa Laval), OWM valve with waterbox (original Alfa Laval), all inlet/outlet pipes, service tools for maintenance including pressing tool. Instruction manual available., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 4.950 rpm, Motor: 22 kW - 380 V - 60 Hz - 1.750 rpm - 40 A, Dimensions: 180 x 130 x 175 cm, Weight: 2.130 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 660 pieces -Type: SNK 2285 4.6 x 145 mm -Price/Delivery: complete -Transport dimensions: 270/160/H150 mm -Total weight: 12.1 kg

Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, Spiral drill bit Ø 148.5 mm/H7 -Recording: SK50 -Tool: double-edged -Dimensions: Ø 148.5 x 630 mm -Weight: 16.5 kg

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workstation crane, crane foundation plate -Pillar jib crane: intermediate plate/base plate, outside: Ø 1050 mm -Thickness: 40 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Own weight: 576 kg