khs gmbh used for sale

1992 Günzburger Werkzeugmaschinenfabrik GmbH H 100-2 100t An oil-hydraulic die-bending press, manufactured by Günzburger Werkzeugmaschinenfabrik GmbH. The machine has already been completely overhauled once. It is still fully functional. Type: H 100-2 Year of construction 1992 Lifting force 100 t Pressing force: Max 1000 kN Stroke: Max 200 mm Operating pressure: Max 290 bar This is an oil-hydraulic die-bending press, commonly used in metalworking for bending and shaping metal sheets. Find more here - / Contact us at -

VA-11. Inhibitor System / Glycol Injection (B 640) Partial system, 1 tank functional, cleaned, Built: 1990 Complete system (pumps, control, etc.) Manufacturer: LEWA GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.25m; Length approx. 2.5m; Mass per unit 2.0t; Volume 2700 l Find more here - / Contact us at -

Laboratory Ploughshare Table, Demonstration Machine Volume : 10 ltr. Material : Areas in contact with the product in stainless steel

We are looking for retail properties for sale without a broker! Criteria: vacant retail properties in need of renovation, such as DIY stores, supermarkets, hotels, apartment blocks in Germany and the Netherlands in cities with 20,000 inhabitants or more or near major cities. Please send all offers to the contact person: Svetlana Ament E-Mail: samentscholten-tanks Phone: 05924 255 485

We are looking for hotels for sale without a broker! Criteria: vacant hotels in need of renovation in Munich, Berlin, Hamburg and Frankfurt am Main or near major cities wanted Please send all offers to the contact person: Svetlana Ament E-mail: samentscholten-tanks.de Phone: 05924 255 485

Description Gravimetric/Volumetric Doser Voltage: 230 V Approximate hopper capacity: 10 L Single-phase aspirator Voltage: 230 V Approximate capacity: 5 L GRAVIMETRIC/VOLUMETRIC DOSER

Description Single Phase Suction Unit Voltage: 230 V 50/60 Hz Power: 0.8 Kw Approximate capacity: 3 L

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

A conventional center lathe is available. An on-site inspection is possible.

Capacity: 300l, working positions: 0-40kg, 22° from horizontal, 40-260kg, tilted 45°, main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

Equipment: Heatable/coolable,Manufacturer: G + R W. Ortmann GmbH & Co. KG,Condition: used,Volume: 13,500,Design: rectangular,Base: feet,Number of feet: 6,Heating/cooling (filter bar): available,Temperature control inside: Cooling plate,Total height: 2,450,Total width: 1,600,Total length: 5,050,Type plate: Yes,Outlet: DN40 DIN 11851,Remarks: 2 cooling plates each inside the tanks 1 manhole approx. 300 x 400 mm in the front floor Feet partly with loose, height-adjustable spherical screws (not available for all feet, calottes were not taken into account in the total height)

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8,690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 8,850,Design: rectangular,Stand shape: feet height adjustable,Number of feet: 4,Total height: 3,850,Total width: 1,500,Total length: 2,600,Type plate: No,Equipment: Level indicator (without guarantee), Disc,Outlet: DN65 DIN 11851,Remarks: 1 manhole approx. 325 x 420 mm in the front floor Container were professionally cleaned and overhauled by the manufacturer in 2024 Brand new residual drain valves (reduce the size screwed on the Outlet on DN 50 DIN 11851 (with disc valve)) and manhole seals were installed

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 9,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 2,000,Cylindrical height: 2,440,Total height: 3,700,Wall thickness underbody: 3,Wall thickness cylinder: 2,Wall thickness upper floor: 2.5,Technical documents: Drawing,Manhole / dome: in the cylinder,Type plate: No,Outlet: DN100 DIN 11851 ,Remarks: 1 manhole approx. 320 x 420 mm in the cylinder Container was professionally repaired by the manufacturer in 2024 cleaned and overhauled brand-new residual drain valve (reduced) outlet to DN 50 DIN 11851 (with

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 24,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 6,Diameter inside: 3,450,Cylindrical height: 1,650,Total height: 3,650,Wall thickness underbody: 4,Wall thickness cylinder: 2.5,Wall thickness upper floor: 3.5,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: No,Outlet : 100,Remarks: 1 manhole approx. 320 x 420 mm in the cylinder Total height according to drawing Tank were built by the manufacturer in 2024 professionally cleaned and overhauled brand-new residual drain valves, sampling valves and

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.

We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).

Can filling line KHS capacity: 25.000 cph by 500 ml cans filling product: beer and softdrinks can size: 330 ml and 500 ml cans can type: 211/202 consisting of: 1. Bulk can depalletizer LINKER DPG-500, year 2012 2. CanCeck TransTechHysek, year 2012 3. Can conveyor LINKER Conveyor RC/KHS, year 2012 4. Rinser LINKER Triplex Rinser TR/KHS, year 2012 5. Flush pasteurizer KHS Innopro 140/14/85, year 2012 6. Filler KHS Innofill Can DVD, year 2017 7. Seamer Ferrum F08, year 2012 8. Lid feeder NSM LidserverA30, year 2017 9. Conveyor KHS Innoline BTR, year 2012 10. Filling height control KHS Innocheck CUB, year 2012 11. Blowing Europool 12. Packing machine KHS Kisters SP0502, year 2012 13. Pack conveyor KHS Innoline GTR, year 2012 14. Handle applicator KHS CSM 050-2, year 2012 15. Packing machine KHS Innopack 035 B2+FS A-L, year 2012/2017 1 ...

Auction-ID: A7-45017-4

Auction-ID: A7-45017-1

Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle

Mobile jib, Weight of the gallows (kg): 190 , load capacity (kg): 120 , Dimensions (mm): 1645x800 H 1970, Max height (mm): 1620, Gap dimensions (mm): 670, Minimum spacing dimensions (mm): 310

Turning station RITTAL / E SYS-K System GmbHWome machine for packaging made of ALU system profileSwivel station with roller conveyor, ALU system profile BOSCH REXROTHweight of the turning device 730 kgAs good as new; used

Butcher's counter LADENBAU HANKE GmbH, approx. 380 cm, front windows can be opened upwards, purchased in 2005 for 14,326.83 EUR net, BW 31.08.25 1,- EUR net, renewed in 2015 for 1,868.- EUR net, BW 31.08.25 1,- EUR net, 5 plastic inserts/covers for counters each approx. 54x35x60b cm

Refrigeration Dryer – ALUP ADD 36, Manufacturer: ALUP Kompressoren GmbH, Model: ADD 36 (1), Year of manufacture: 2021, Machine type: Refrigerated compressed air dryer, Description, The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems., This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines., Technical Specifications, - Manufacturer: ALUP Kompressoren GmbH, - Model: ADD 36 (1), - Year: 2021, - Product number: 4102005889, - Serial number: ITJ560627, - Power supply: 230 V, - Frequency: 50 Hz, - Power consumption: 0.236 kW, - Phase: 1 Ph, Operating Specifications, - Working pressure: 15 bar, - Maximum pressure: ...

Children's carousel ELEKTRO MOBILTECHNIK GmbH 610/46 L/HE, 440 watts, out of service

available from July/August 2026, in operation for 225 and 380 ml jars with TO 58 and 66, The machine is currently operating with nitrogen blanketing (no steam), which drives the oxygen out of the headspace., For sale is a VTB Glass seal machine (Model VM 105 Twist Off) in good, used, and fully functional condition., The machine is currently still in operation and can be inspected at any time by arrangement. It is ideal for the Food industry (e.g., canned foods, sauces, jams) and convinces with its robust stainless steel construction as well as reliable sealing technology., Inline sealing machine for twist-off closures, Integrated Lid sorting for 58 and 66 closures, Gas purging system (optional, usable) for longer shelf life, Pressure rollers for reliable sealing, Transport belt with adjustable side guides, Height adjustment for different glass formats, Operator panel rotatable and swivel ...

16 pallets of 1260mm x 960mm x 3mm thickness, interleaving and cover board. Approx. 375 sheets per pallet. Auction-ID: A1-45187-111

Fendt / Fella Lotus 1250 T – tedder • Year of construction: 2022 • Working width: approx. 12.50 m • 10-rotor tedder (large-area machine) • Trailed version with transport chassis • PTO drive • Warning signs and lighting available • Wide tyres • Ready to use • Very good technical condition • Regularly serviced and maintained • Ran in action until last season • No known technical defects • Frame professionally repaired in two places • Optimized storage (no longer standard) Auction-ID: 04D-FY8-2

Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right

GEA Refrigeration Germany GmbH screw cooling compressor, type: Grasso MR-M2655S-28, serial number: M1949, year of construction: 2014, geometric volume: 3912 CM³/rot, flow rate: 845 m³/h, allowable pressure: 28 bar, max speed: 4500 rpm, refrigerant: NH3 R717, empty weight: 3090 kg, with WEG motor, power: 160 kW, dimensions cooling compressor: 3300 mm x 1300 mm x 2300 mm, dimensions switch cabinet: 2400 mm x 600 mm x 2200 mm.