khs filling used for sale

Eurolux - Pressure Filler for glas bottles with 12 stations – Capacity 0,5l: to 650 bottles/h - NEW Technical data: - Capacity 0,5l: to 650 bottles/h, it is also possible for : 0,33l, 0,7l, 1,0l, 1,5l /other capacity - Installed power 0,37 kW - Weight: 240 kg - Measurement: HxWxD: 200 x 1000 x 1000 mm - With 12 stations - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A • Handling 1 Person • Operating Manual and Spare Parts List available. Video available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Lieder cream filling machine Speed 20 - 60 pcs / min. Volume 15 ml - 250 ml Induction sealing Capping machine

Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls

Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...

Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit

Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.

Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 24 months.

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

Make : ILPRA Model : FS 4000 Capacity : 4000 Volume of Filling : 100-500gr Pockets : 2x8 Cup Dispensing Filling Aluminium Lid Application Lid Sealing Fully Fuctional May be used for jam filling, but can work with other products like yoghurt or cream cheese. Electric power supply: 400V 50Hz 3N

mounted on a stainless steel base frame due to the completely pneumatic control (without electrics) suitable for filling disinfectant, Piston stroke: 5 ltr. - that means two filling operations for one 10 litre canister capacity: approx. 150 - 10 ltr. canister / h

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Capsule Filler Encapsulator 400 caps/min. 24.000 caps/h

Used fluid packing machine in foil bags made by Unipak, type ASG 3T.

Used Stork monoblock. 32 fillers and 8 screw heads. For PET bottles. Dose adjustment on the pistons.

Used Hamba packaging machine for 75 mm cups. Capacity depending on the product up to 6400 cups per hour. Modernized in 2007.

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

Juice mixer, juice mixing plant. Fruit juice bottling Beverage mixing plant used. Manufacturer: Füllpack GmbH (Gea Group) Model: Fuellmix-MB Elo Filling Mix MB PLC S7 and Monitor Visualization Fuellpack Mixer 2 / Mixing plant 2 Power approx. 7000 - 15000 l/h Including Fischer-Porter flow meter; Valves, pumps, Panel Documents available Dimensions 2800 x 2100 x 2100 mm

Qty. 1 Second-hand carusel Monoblok filling line Mfc.: Stork Bepak B.V. Built: 1992 Type: VS 60/110/12LV Capacity: 20 000 Btl./h No. of filling stations: 60 pieces No. of closing heads: 12 pieces Size of buttles: 250, 500, 700 & 750 ml Inspector checking the fill level and cap Very good condition!

Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

Capacity: 6,000 - 8,000 cups/hrs Number of tracks: 4-lane longitudinal runner Closure: Sealing Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Please contact us.

Make : Ilpra Model : FS 5000 Year of Manufacture : 1996 Cup Size : 95mm Volume : 100 ml to 450ml Capacity : 4000 pcs per hour Voltage : 3 phase / 50Hz Air : 6 Bar HEPA Filter CIP Out Feed Conveyor Condition : Very Good Available : Immediately Previous Use : Yoghurt and Deserts Filling

Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 50 litre funnels. Filling head height infinitely adjustable. Dosing quantities and filling speed infinitely adjustable, control line for external pulse generators. Pneumatic drive, external compressed air supply 6 bar required. Dimensions B/T/H 130/70/190 cm. Workshop-tested, ready to use. Further on request.

Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for powdery, liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 12 l funnel with screw conveyor. Filling head height infinitely adjustable. Dosing quantities and filling speed can be infinitely variable. Pneumatic drive, external compressed air supply 6 bar and 400 V power connection required. Dimensions B/T/H 120/45/210 cm. Workshop-tested, ready to use. Further on request.

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

1-A3 Flex 1000ml Gemina Filling line with two extra volume change kits 500ml and 750ml Year of manufacturing 2016 2-Cap applicator Cap Flex 30 3-Helix Accumulator 90 meter 4-Date printer 5-Conveyors 200 feet 6-Paper Trolly

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Used nacuum monoblock MO10/4. New 2010. AUTOMATIC MONOBLOCK FILLING MACHINE is adapted to filling non-carbonated liquids and screwed into PET bottles. The machine has tooling adapted to the bottle and cap pattern. Technical parameters: capacity max. 3000 bottles/h 0,1 L PET 10 pcs of fillers 4 pcs capping heads motor 2,2 kW, 900 rpm power 3x380V/60Hz Compressed air demand 1,5m3/h dimensions 1530x1230x2400 mm weight 950kh.

Used sachet machine made by Sovapack for packing powder into flat bags 100x100 mm. Overall height (with hopper) 22350 mm, width 1100 mm. Width of the rollers guiding the foil 560mm, 800 mm. Hopper height 645 mm, width on top 75 cm, width at the bottom where there is a hoop with holes for the bolts on which the funnel is placed is 16cm.

Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes

TETRA PAK A3 COMPACT FLEX 250ML AND 200ML PRISMA FILLING LINE Item #: Usm-131 Category Tetra Pak A3 CF/Flex A3 Compact Flex 200ml and 250ml Prisma Filling Line with quick Change kit. Year of manufacturing for the full line is 2016 and few working hours, just like new 1-A3 Compact Flex 200ml and 250ml Prisma Filling machine, Speed 9000 Packs per hour 2-Date Printer 3-Helix Accumulator 30 meter 4-Straw applicator TSA 30 5-Shrink 30 6-Conveyors and Paper Trolly

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

Piston dosing filler for cold and hot products (e.g. syrup, jam, chutney,...) Filling volume 50-1000ml

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

with compressed air with lift to the top Stainless steel version medium sized funnels Manufacturer: Unknown