kg used for sale

Electric chain hoist make DEMAG type PK 2 NFFabr. -No: 1523998 Year of construction 1987Capacity: 500 kgLifting height: 3.0 mLifting speed: 5.0 mFine lifting speed: 1.25 mMotor power: 0.5 / 0.13 kWWith- fine lift- 2-stranded- Electric lifting magnet Mannesmann / Demag R27 / 220xa0xa0 -No: 128122, rated current 0.75 A, Drm. Magnet 250 mm- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr -No: 5546885Capacity: 250 kgLifting height: 3.0 mLifting speed: 4.0 m / min.Fine lifting speed: 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-stranded- chain case- Casters for Demag profile- Control bottleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface Grinding Machine Fabr. STANKO Type 3 D 722 WMake -No: 43432, built in 1987Sanding area: 1250 x 320 x 400 mmsm./lg. Distance spindle center - clamping surface Table: 190/630 mmTable clamping surface: 1000 x 320 mmsm./lg. hydr. Longitudinal adjustment of the table: 300/1050 mmClamping surface of the magnetic plate: 900 x 320 mmHeight of the magnetic disk: 120 mmgr. Vertical adjustment of the headstock: 440 mmGr. transverse adjustment of the wheelhead: 400 mmsm./lg. Outer diameter of the grinding wheel: 325/450 mmDrm. Grinding wheel bore: 203 mmGrinding wheel speed: 1500 rpm.Stepless longitudinal movement of the table: 2.0 - 40 m / min.infinitely variable feed of the headstock: 0.5 - 3.0 m / min.Vertical rapid adjustment of the headstock: 406 mm / min.Drive power: 10 kWOutside dimensions approx: 3300 x 2020 x 2290 mmWeight approx: 7100 kgWith- magnetic disk- Separate hydraulics- Con ...

Electric chain hoist make STAHL type R 6/600Masch. -No: 3544260 Year 1971Load capacity: 600 kgLifting height: 3.0 mPower: 0.44 kWWith- fine lift- Roller chassis- chain memoryused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-point tool grinding machine make SOLID type DS 3 CDMachine -No: 146064 Year 1964Grinding wheel pre-sanding SC: 200 x 50 x 51 mmTable: 400 x 150 mmGrinding wheel regrind SC: 200 x 50 x 51 mmTable: 400 x 150 mmGrinding wheel lapping cut diamond: 125 x 12.5 x 51 mmTable: 400 x 150 mmChip breaker grinding wheel: 150 x 8 x 51 mm2 engine speeds: 1400/2800 rpm.Drive power: 0.5 / 0.8 hpDimensions L x W x H /: 1110 x 1000 x 1280 mmWeight approx: 300 kgWith- Cooling device- Underframeused, from a vocational school in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr. -No: 1471196 built in 1970Capacity: 250 kgLifting height: 3.0 mLifting speed: 8.0 / 4.0 m / min.Fine lifting speed: 2.0 / 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-strandedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool grinding machine make HAHN & KOLB type WS 54Year of construction 1975gr. workpiece diameter: 200 mmgr. clamping length between the tips: 230 mmMounting cone: MK 5Gr. grinding length: 110 mmCrossfeed: 140 mmPivoting the workpiece spindle head: +/- 7.5 °Swiveling the angle head horizontally and vertically: +/- 90 °Speeds of the grinding spindle: 4450 - 31000 rpm.Grinding wheel diameter: 125 mmMotor power: 0.55 kWDimensions L x W x H: 1400 x 1000 x 1500 mmMass. approx: 500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric cable factory TPS type SH 512/525Fabr. -No: 9913456 Year 1999Load capacity: 250 kgLifting height: 10 mLifting speed: 5.0 m / min.Rope diameter: 3.0 mmPower: 530 WPower connection: 220 V / 50 HzWith- Trolley Yale for double T-barsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grinding machine make DECKEL type SOMasch. -No: 89-24422 Year of construction 1989Technical specifications:gr. radius to be ground: 10 mmgr. lateral displacement of the milling cutter holders: 10 mmgr. Longitudinal displacement of the cutter holder: 40 mmgr. adjustable back grinding angle: 45 °gr.Bore of the collet: 17.5 mmGrinding spindle speed: 4500 rpm.Drive power: 0.25 kWDimensions L x W x H: 500 x 420 x 1400 mmWeight approx: 67 kgWith- baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NFabr. -No: 1730966 built in 1970Technical specifications:Load capacity: 500 kgLifting height: 3000 mmMain lifting speed: 10 m / min.With- chain case- single fall 500 kg- control cables- Manual landing gearused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single-edge milling machine make DECKEL type SOMachine -No: 81659 built in 1981 (table model)Technical specifications:Tool holder: 17.5 mmTaper collets: MK 1 / MK 2 / GAGrinding spindle speed: 4500 rpm.Adjustment of the tool holder: 10 mmLongitudinal shift: 40 mmMax. Relief grinding angle: 45 °Drive power: 0.25 kWSpindle speed: 2800 rpm.Weight approx: 32 kgExternal dimensions approx: 510 x 565 x 290 mmWith- grinding wheel- several colletsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal winch / cable winch make VEB Wilsdruff type 52.3Fabr. -No: 378, TÜ no. 5/4060/139, built in 1990Technical specifications:Tensile force: 3 kN (300 kg)Cable speed: 10 m / minRope diameter: 8 mmPermissible number of rope systems: 4Motor power: 0.55 kWWeight: 140 kgWith- hook- Control buttonsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single-edge milling machine make DECKEL type SOMachine -No: 0221 (table model)Technical specifications:Tool holder: 17.5 mmTaper collets: MK 1 / MK 2 / GAGrinding spindle speed: 4500 rpm.Adjustment of the tool holder: 10 mmLongitudinal shift: 40 mmMax. Relief grinding angle: 45 °Drive power: 0.25 kWSpindle speed: 2800 rpm.Weight approx: 32 kgExternal dimensions approx: 510 x 565 x 290 mmWith- grinding wheel- several colletsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFManufacture -No: 5550183Technical specifications:Load capacity: 125 kgChain Length: 3.0mLifting speed: 8.0 m/min.Fine lifting speed: 2.0 m/min.With- Chain hoist manually 1-strand- control cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aut. Keyway and Slot Milling Machine Fabr. RUWO HAHNDORFType AF 56 machine -No: 63/2445/1 year of construction 1963Groove length: 350/400 mmGroove width up to: 50 mmGroove depth: 15 - 40 mmDepth feed: 0.1 - 0.5 mmDivision of the delivery: 0.1 mmForm feed: 50/80/120 mm / min7 spindle speeds: 180 - 1000 rpm.gr. shaft diameter: 170/330 mmTool holder: MK 2Drive power: 1.1 / 0.6 hpDrive power of the side feed: 0.17 hpDimensions L x W x H: 1000 x 500 x 1100 mmWeight approx: 270 kgWith- Cooling device- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make ABUS type GM 3 500.6-111Fabr.-No: D665223/074 year of manufacture 1990Technical specifications:Load capacity: 500 kgLifting Height: 3.0mLifting speed: 6.0 m/min.Precision stroke: 1.5 m/min.Motor power: 0.11 / 0.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical broaching machine make RAUSCH type RS / Z6 / 500 SFabr. -No: 70101 Year of construction 7/1994Traction: 6.0 tStroke: 500 mmgr. workpiece diameter: 600 mmWorkpiece height: 600 mmkl./gr. Cutting speed: 3.0 / 5.0 m / minReturn speed: 10 m / minDrive power: 4/7 kWExternal dimensions approx: 1700 x 1200 x 4500 mmWeight approx: 1200 kgWith- broaching tool - feeder- Tension measuring device- Clamping head for end piece C32 DIN 1415- Tool safety- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wall swivel crane make STAHL type PW 125 kgMachine -No: 68543/12011 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grooving machine, make RAUSCH type RS 1/800Masch. -No: 1384 built in 1964Technical specifications:Clearing force 1.0 tStroke 800 mmMax. Groove width 20 mmMax. Tool length 1000 mmClearing speed 3.0 m / min.Rewind speed 6.0 m / minTable size 320 x 220 mmDrive power 1.5 / 3.0 kWWeight 340 kgExternal dimensions approx. 700 x 600 x 1500 mmWith- 8 broaches: 5JS9, 6JS9, 8JS9, 8P9, 10J9, 10R9, 12J9, 14J9- many guide bushesused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wall swivel crane make STAHL type PW 125 kgMachine -No: 69840 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic horizontal broaching machine make HAHNDORF type HRY 1200Technical specifications:Groove width up to: 22 mmPulling force: 4.0 tMax. broach length: 1200 mmBroaching speed: 0 - 3.7 m/minRapid return constant: 8.5 m/minHole pitch: 24 x 15°Mounting plate diameter: 350 mmWorking height: 925 mmTank capacity: 100 lPump output: 15 l/minDrive power: 3.0 kWDimensions L x W x H: 3310 x 500 x 1100 mmWeight approx.: 375 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile workshop crane make FAV type 1475Fabr. -No: 109009 built in 1990Load capacity: 1.0 tPower with extended boom: 300 - 1000 kgExternal dimensions approx: 2000 x 1000 x 1500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic keyseating machine make FRÖMAG type Rapida D RAD 63/600Fabr. -No: AKK84873 built in 1978Technical specifications:Groove width: 3 - 63 mmmax.groove length: 600 mmHole diameter: 10-500 mmFeed size: 0.01-0.5mmCutting speed: 0-22 m / minReturn speed stepless: 0-50 m / minLoad capacity max .: 30000 kgCutting force: 30000 NTable size: 460 x 690 mmOperating height: 1145 mmBase area: 1200 x 1800 mmFoundation depth: 760 mmDrive power: 8.77 kWWeight approx: 1680 kgWith- many draw numbers- many guide bushessecond hand:SPECIAL PRICE in stock as available - with lots of accessories!Control in need of overhaul: EUR 6.500, - Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Wall jib crane make DEMAG with wall bracketTechnical specifications:Load capacity: 250 kgThroat: 5000 mmWith- KBK systemusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Knurling machine make NAKAHIRO type NS 605 SYear of construction 1980Max. Stroke length: 100 mm3 lifting speeds: 200/300/400 H / minInclination of the lifting carriage max.:15°aut. depth infeed: 0.5 mmMax. Workpiece diameter: 100 mmminute Workpiece diameter: 6 mmMax. Internal planing diameter: 80 mmminute Internal planing diameter: 15 mmMax. Inclination: 30 °Tool size: 12 x 12 mmDrive power: 0.4 kWDimensions L x W x H: 1200 x 550 x 1600 mmWeight approx: 550 kgWith- aut. and man. Operation possible- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized slewing crane make DEMAGTechnical specifications:Load capacity: 2000 kgOutrigger: 5000mmLifting height: 5000mmWith- Demak PK 10 electric chain hoistused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-fold Combined Sectional Shear make PEDDINGHAUS type PeddyMachine -No: 4061257680021, built in 1980PROFILE STEEL SCISSORS:L-steel 90 ° cut: 80 x 8 mmL-steel 45 ° cut: 50 x 6 mmPROFILE STEEL KNIFE:L-steel 90 ° cut: 60 x 6 mmT-steel 90 ° cut: 60 x 7 mmL + T steel 45 ° cut: 50 x 6 mmSPECIAL BLADES:U-steel: 80 mmI-steel: 100 mmFlat steel: 80 x 12/120 x 8 mmSTEEL BAR CUTTER:Round steel: 28 mmSquare steel: 25 x 25 mmFlat steel shears: 100 x 11/10 mmThree-notch claw: 8 mmStrokes per minute: 36Drive power: 1.5 kWWeight: 460 kgExternal dimensions approx. 1200 x 1000 x 1600 mmWith:- electrical alignment and footswitch- Triangle notching (upper and lower knife missing!)- bogieused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We wo ...

Crane fork Fabr. PFAFF type LM 2/20Fabr. -No: 800471/1 Year 1998Capacity: 2000 kgLoad center distance: 0.5 mFork length: 1100 mmFork width max: 1000 mmWeight: 153 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Section steel shears make PEDDINGHAUS type PeddyMachine -No: FF 3401PROFILE STEEL SCISSORS:L-steel 90 ° cut: 80 x 8 mmL-steel 45 ° cut: 50 x 6 mmPROFILE STEEL KNIFE:L-steel 90 ° cut: 60 x 6 mmT-steel 90 ° cut: 60 x 7 mmL + T steel 45 ° cut: 50 x 6 mmSPECIAL BLADES:U-steel: 80 mmI-steel: 100 mmFlat steel: 80 x 12/120 x 8 mmSTEEL BAR CUTTER:Round steel: 28 mmSquare steel: 25 x 25 mmFlat steel shears: 100 x 11/10 mmThree-notch claw: 8 mmStrokes per minute: 36Drive power: 2.2 kWWeight: 460 kgOutside dimensions approx. 1200 x 1000 x 1600 mmWith:- Underframe- Square notchused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Walde ...

5-way combined iron worker with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: 0171793397130 built in 1993Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel scissors L-steel 90 °: 140 x 13 mmL-steel 45 °: 70 x 7 mmSteel bar scissors round / square: 45/42 mmNotching device: 10 mmHole punch punching force: 55 tProjection: 510 mmpunches: 30 in 16 mmStroke of the punch stepless: 0 - 60 mmNumber of strokes of the punch with 20 mm travel: 42 strokes / minDrive power: 5.5 kWWeight about 1500 kgWith- support tables- various accessoriesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile workshop Crane make BULLCRAFT type L 2000Load capacity: 2000 kgConstruction width: 1340 mmOverall length: 1910 mmConstruction height: 2090 mmMax. Lifting height: 3220 mmInner width: 1177 mmDead weight: 245 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-way comb. Section steel shears make PEDDINGHAUS type Peddimaster 28/40 HMachine -No: 4421050787006Technical specifications:FLAT STEEL SHEARSFlat steel with little deformation up to: 300 x 10 mmor: 250 x 10 mmor: 200 x 11 mmor: 75 x 15 mmKnife cutting length: 300 mmWorking height: 830 mmPROFILE STEEL SHEARSShear cross section max .: 1300 mm²Infinitely adjustable stroke: 10 - 26 mmL-steel 90 ° cut up to: 80 x 8 mmL-steel 45 ° cut up to: 50 x 6 mmRound steel: 29 mmSquare steel: 25 mmWorking height: 1088 mmNOTCHERSquare notcher sheets up to: 8.0 mmL-steel up to: 60 x 6 mmU-steel in the flange: 50 x 25/60/65 mmI-steel in the flange: 80/100 mmNotch width / notch depth: 42/55 mmHOLE PUNCHPunching force: 280 kNInfinitely adjustable stroke: 10 - 26 mmholes with punching table: 27 in 8 mmU-steel in the flange: 65 - 200 mmU-steel / I-steel in the web: 80 - 260 mmPunch projection: 305 mmWorking ...

4-fold combined profile steel shears make PEDDINGHAUS type Peddimaster 80/110, built in 1993Technical specifications:FLAT STEEL SHEARS:500 x 18 mm:400x19mm:300x22mm:200x25mmKnife length: 510 mmPROFESSIONAL STEEL SHEARSAngle steel 90°: 120 x 13 mm:150x100x12mmAngle steel 45°: 100 x 10 mmRound bar: 45 mmSquare steel: 40 mmSQUARE NOTCHSheets up to: 13 mmLatch width: 65 mmNotch depth: 85 mmHOLE PUNCHPunching force: 80 tProjection: 510 mmStroke continuously adjustable: 10 - 30 mmHoles: 30 in 20 mm:27 in 20mmGENERAL MACHINE DATANumber of strokes: 22 / 16 h/minOil filling: 80 lDrive power: 7.5 kWWeight approx.: 2450 kgExternal dimensions approx.: 1990 x 850 x 1890 mmwith- stop table- 2 footswitches- Rectangular notcher- large lot of punches and matricesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

Electric forklift make KÖTTGEN type ESK 1000 / 2SGSMachine -No: 43602, built in 1987/92Load capacity: 1000 kgStroke: 5200 mmwith battery: DETA 4 Pz S 400 80 Vand charger: DETA D 80 v 60 Aused in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tiller-guided electro-hydr. Tool lift Fabr. BAKA type EGV 60/605Masch. -No: SOE 27555 built in 1998 with drive Load capacity: 700 kgTable size: 1400 x 600 mmretracted height: 800 mmextended height: 1100 mmStroke: 300 mmBattery power: 24 VDead weight: 400 kgOutside dimensions approx: 1900 x 600 x 1100 mmWith- Battery 24Velec. Travel drive- Emergency stop switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric forklift make STILL type EFG 12Machine -No: 09261065, built in 1972Payload: 1200 kgMax. Lifting height: 4000 mmFork length: 1400 mmNet weight: 2410 kgpermissible total weight: 4.0 tHeight with retracted mast: 2150 mmWidth: 1000 mmWith- Battery 24V / 700 AKxa0xa0 12 cells / 605 kg, year 4/90- Duplex mast- chargerdespite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Diesel forklift make LINDE type H 60 DWFabr. -No: 329C95002680 built in 1992Technical specifications:Lifting capacity: 6.0 tDead weight: 10060 kgLifting height: 4.0 mDimensions approx: 5800 x 1850 x 2600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make EDEL type punching professional 400 SMachine -No: 2951392 Year 1992Punching force: 40 tWorking area: 1500 x 900 mmTravel depth stop: 450 mmTravel length stop: 750 mmTool size up to: 100 or 135 mmMaterial thickness up to: 12 mmPunching examples: 100 in 3.5 mmor: 30 in 10 mmPunching sequence (about time interval): 1.5 sDimensions L x W x H approx : 1500 x 1500 x 1700 mmWeight approx: 2000 kgWith- several toolslittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inclined lift trailer make Böcker type Piccolo 20 / 0-4Fabr. -No: 27470, built in 1996Load capacity: 200 kgextendable from: 5.14 - 20.10 mRope diameter: 6 mmEngine type: motorhydaulischEngine: HondaDrive power - petrol engine: 8 kWWeight approx: 840 kgTotal length approx: 6540 mmbuilt on single axle trailerWith- slack rope safety- Slewing ring can be locked in three positionsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punching machine make PEDDINGHAUS type Hydraulik 1000Masch. -No: 4207873785003, year of construction 1985Printing power: 1000 KNStroke infinitely adjustable: 10 - 100 mmNumber of strokes: 34 - 80 1 / minDischarge: 760 mmInstallation height: 500 mmDrive power: 380 V / 15 kWpunches e.g. up to: 31 mm Ø in steel: 25 mmwith special punch saddle e.g. up to: 58 mm Ø in steel: 13 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 e.g. up to: 90 mm Ø in steel: 8.5 mmWeight approx: 3600 kgOutside dimensions approx. W x H x D: 1200 x 2450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Mobile work platform make EIFEL type E III 1Fabr. -No: 7102 built in 1979Payload: 300 kgLifting height: 7.2 mWorking height approx.: 9,0 mPlatform size: 1000 x 1200 mmStand area: 1700 x 1100 mmEngine power: 1.5 kWTotal length chassis: 2750 mmWeight approx.: 680 kgused..Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic punching machine make EDEL type HP 16-600 SBFabr. -No: 20104Punching force: 16 tPunching capacity: 24 in 5 mmor: 40 in 3 mmor: 50 in 2 mmfor tools up to: 70 mmDischarge: 600 mmStamp recording: 24 Drm. x 85Die height: 78 mmRam stroke: 13 mmDistance scraper - die: 6.5 mmAir requirement per punching: 45 NLMachine weight: 600 kgExternal dimensions machine L x W: 300 x 1050 mmUnderframe: 1100 x 560 x 380 mmWith- Steel base- Material support table- Quick change tool setsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor lift manufacturer WMW type HT 20500Masch. -No: 16 built in 1990Load capacity: 2000 kgTable size: 2500 x 1250 mmLifting height: 1600 mmHeight: 440 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC punching machine make EDEL type Microcut 211Machine -No: 30287 Year 1998Punching force: 200 kNDirect working area: 1500 x 1000 mmTool size up to: 100 mm diameter, as well as forms: within this circular areaMaterial thickness up to: 4 mmfree passage up to approx. 30 mmWiper system: sprungTool System:: Noble Quick Change ::: Tool head 30x120 / 146x40Total connection value: up to: 16 kVA (400 V, 50 Hz) Protection class: IP54, control voltage 24 V,: DCWidth x depth x height: 3350 x 3750 x 1800 mmWeight: 7500 kgIncl.:- Mechanical and control technology REVO - M Basic equipment for the use of turret tools- ram stroke programmable (instead of manual adjustment)- CNC LOGO and programming with workpiece graphics- 1 set of set-up elements with leveling device- CNC CAD programmer software in standard version- 6-fold Rev. tools- Tools for Rev. Ø 4,2 - Ø 6,5 - Ø 8,5 / right 18x6 wide side fron ...

Laser cutting system make LSS LASER LAB type CONTOUR 3015/ 020 SLABTechnical specifications:Cutting area: 3000 x 1500 mmLaser source :Rofin-Sinar Laser DC 020- Output Power Range / Guaranteed:200 - 2000 W/ 2000 W- Performance stability:+- 2% (24h)- Laser beam quality Drm. : < 25mm- Beam index: K > 0.8- Pulse generator, pulse frequency: 0 or 8 - 5000 Hz Pulse Width: 26ms-CW- Laser gas: Rofin-Sinar special premix Consumption: < 0.3 Nl/hCutting capacity (according to the LSS company) approx. :10 - 12 mmRapid traverse: 10 m/min.programmable Z axis: 175 mmHigh-pressure cutting up to:20 barBeam data: 10.6 kgBeam quality: 20 - 25 mm K09Directional Stability: 0.15 mrad.Polarization linear:45°Pulse characteristics: 2 - 5000 HzLaser gas: 0.15 NL/h.Laser head dimensions: 1700 x 800 x 853 mmWeight laser head approx.: 500 kgDimensions control cabinet: 800 x 600 x 1900 mmWeight control cabinet approx ...

Scissor lift table make SAX LIFT A / S type IL 1000 SB-STechnical specifications:Load: 1000 kgUseful stroke: 1050 mmConstruction height: 250 mmMax. Height: 1300 mmLifting time: 34 secSize of the usable area L x W: 2800 x 1000 mmDrive power: 1.1 kWWeight approx: 300 kgWith- Hand switch with up / down- emergency stop- safety bar- railings- Platform with checker plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric construction hoist type BoyManufacturer No .: 36817 Year 1994Load capacity: 150 kgHead: 40 mRope diameter: 4 mmNominal strength: 1960 N / mm2Power: 0.85 kWCurrent type: 220 V / 50 HzWith- Control cable and bottle- storey supportused, from an operational resolutionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools