We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,702 used machines on RESALE, but how to find them? Machine Search
used
Krämer Lufttechnik Suction VKA-P KFT
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump
used
Centrifugal pump Manufacturer Fristam Type FZ 22 KFC Serial number 0550560022 Power 11.0 kW Speed 1,450 rpm Admission DN 65 Outlet DN 65 Year of construction 2016 self-priming Clamp Connectors from Pharma
used
used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 12 bar, capacity approx. 150 liters, filter area 12m2, dimensions 2500 x 900 x 1200 mm, weight 800 kg, hand hydraulics, drip plate, filtrate channel, with or without filter cloths
used
KRONES KFS 3 HMI Control Panel Price: 1500 EUR net Condition: used
used
used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths
used
Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used
used
used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths
new
sheet width: 2020 mm plate thickness: 2 mm daylight upper clamping: 122 mm bending angle max.: 135 ° range L-W-H: 2,56 x 0,6 x 1,26 m weight of the machine ca.: 1020 kg Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used, kpl. 1 year warranty, plate size 800 x 800 mm, 100 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 1320 liters, filter area 106m2, dimensions 9000 x 1300 x 2200 mm, weight 11,000 kg, motor hydraulics, filtrate channel, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 100 plates, closed outlet, 20 mm cake thickness, pressure 15 bar, capacity approx. 1850 liters, filter area 224m2, dimensions 9500 x 1600 x 2300 mm, weight 18,000 kg, motor, automatic hydraulics. Plate transport, with or without filter cloths
used
used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 80 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2400 liters, filter area 185m2, dimensions 7500 x 1600 x 2300 mm, weight 18,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths
used
See PDF attached
used
used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths
new
used
Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet
used
; Mileage [km]: 6; Power [PS]: 380
used
Ampack KF1/3 cup filling machine. Format parts for 75 and 95 mm round Cup. filling volume 100-550 ml, filler and productfunnel CIP cleanable. equipped with H2O2 cup desinfection, Infra Red lid desinfection and HEPA overpressure system. Capacity up to ±7200 cups per hour. With cup conveyor and turntable. Built in 1995, very good condition. Machine is still in operation until end of 2017. including documentation
used
Liquid ring pump., Pump: Liquid ring pump, dn (mm): 48 , Motor type: DDA132S4, Engine power: kW 5.5Hz 50A 10.8/6.2, Link to manufacturer: https://www.fristam.de/en/centrifugal-pump-fristam-fz/fz-downloads-bro chures/
used
Forming capacities Steel 2 mm Light metal 2.5 mm Stainless steel 1.5 Extension 340 mm Installation height 192 mm Working stroke 25 mm Working cycles 400 p/min. Tiltable 0 - 15o accessories: - 1 pc. tool Engine power 1.5 kW Country of origin Switzerland Machine Weight 330 kg Dimensions LxWxH 120 x 60 x 170 cm
used
Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg
used
Steel bar shear Fabr. MUBEA-Matic type KFMAV 1300Machine -No: 42982L-profile: 30 x 3 to 180 x 18 mmU-profile: 40 x 4 to 220 mmI-profile: 80 - 220 mmI-PE: 80 - 220 mmFlat iron: 5 x 230 to 180 x 30 mmRound profile: 80 mmSquare profile: 70 mmConnected load: 11 kWExternal dimensions: 2200 x 1000 x 2500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Machine name: Chamber filter press used Manufacturer: Krausse Type: KFP 1200-88/88-30 Year of construction: 1997 Design: Side spar Filter pressure: 15 bar Press capacity: 2617 liters Expiration: Closed Filter area: 204 m2 Plate format: 1200 x 1200 mm Number of plates: 90 Sheet material: Polypropylene Plate transport: Automatic Filter cloth washer: Yes Plate pack length: 6257 mm Cake thickness: 30 mm Closing pressure: 380 bar Dimensions: L: 9100 B: 2400 H: 2400 mm Empty weight: 18100 kg Tech. Documentation: Yes available Accessories: filter cloth washer, hydraulics, control cabinet Condition: Used Price: on request
used
x-travel: 4000 mm y-travel: 800 mm z-travel: 800 mm control: HEIDENHAIN TNC355 table-size: 4000x8000 mm T-slots: 6x mm turning speed range: 30-1800 U/min feed: 5-5000 mm/min rapid traverse: 15000 mm/min spindle taper: SK 50 weight of the machine ca.: 15 t With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Centrifugal pump Manafacture: Fristam Type FZ 22 KFC Serial number 0550560022 Power: 11.0 kW Speed 1,450 rpm Inlet DN 65 Outlet DN 65 Year of construction: 2016 self-priming Clamp Connectors from pharmaceuticals
used
Panel size: 630 mm x 630 mm, Number of plates: expanded from 15 to 30 Panel thickness: 50 mm Cake thickness: 25 mm Hydraulics: motorized Filtrate drain: open Weight; 1500 kg (approx.) Pressure: 15 bar (max. feed pressure). The press is still in operation and will be used for industrial wastewater treatment. Discharge chutes below the filter press.
used
Centrifugal pump Manafacture: Fristam Type FZ 22 KFC Serial number 0550560022 Power: 11.0 kW Speed 1,450 rpm Inlet DN 65 Outlet DN 65 Year of construction: 2016 self-priming Clamp Connectors from pharmaceuticals
used
Panel size: 630 mm x 630 mm, Number of plates: expanded from 25 to 50 Panel thickness: 50 mm Cake thickness: 25 mm Hydraulics: motorized Filtrate drain: open Weight; 1500 kg (approx.) Pressure: 15 bar (max. feed pressure), Diaphragm pump Closing pressure at the pressure gauge 380 bar Hydraulic; Type GL KES 401-50 Machine dimensions: L 4450 x W 1700 with protective grille x H 1700 mm. Discharge shaft can be taken along. The plant was regularly serviced. The press is still in operation and is used for industrial wastewater treatment. Discharge chutes below the filter press.
new
KRAFTFORMER ECKOLD KF 324 New machine / year of manufacture 2023 Max. formable sheet thickness -Steel 2mm cze9bpvjhk -Aluminum 2.5mm -Stainless steel 1.5mm -Projection / horizontal 340mm -Projection / vertical 245mm -Plunger adjustment / 32mm via handwheel -Drive / electric motor -Continuous stroke -Incl. 4 sets of tools Dimensions: LxWxH approx. 1250x800x1750mm Weight approx. 470 Kg
used
Liter per hour: 20000 pump type: Centrifugal pump Inlet: male Inlet thread: NW 50 outlet: male outlet thread: NW 50 More then 300 machines new and second hand on our seema .de
used
Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...
used
Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...
used
Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,
used
I am selling a Combined Machine Sliding Table Saw with Scoring + Milling Machine Manufacturer: FELDER Austria Model: KF700S. Built in 2011. Cutting length 3200mm. Saw blade and milling swivel 0-45° manual Saw blade and milling digital height adjustment Digital display of rip fence and working heights Insertion of the main saw blade and scoring machine from the aluminium format table. Main motor sliding table saw 3.0 KW / (3200/4500/5800 rpm adjustable) Scoring motor sliding table saw 0.75 KW Main motor milling machine 5.5 kW Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.
used
Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002
used
RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...
used
Lock case stemmer aggregate: yes;
used
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece
used
Description: . Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 5 kg
used
KFVG filling and closing machine Manufacturer GRONINGER & Co CE Marked Yes Voltage 400 V Frequency 50 Hz
used
Including control cabinet, format parts, spare parts and further accessories.
used
Max. operating temperature: 220°C, heating output: 137kW, compressed air supply: 6bar, connected load: 150kW, length: 5650mm, width: 3200mm, height: 1690mm, weight: 8t, with documentation.
used
Multi-spindle head, multi-spindle drill head, drilling gear -Multispindle head -drill: max. 11 -Cardan shafts: 5x available -Largest drilling pattern Dimensions of the drill: 100 x 230 mm -Weight: 27 kg -Multi-spindle heads are: variable tools -for various processing such as: drilling, thread cutting, countersinking, reaming, -with which several holes can be machined at once -Dimensions: 450/190/H660 mm -Weight: 27 kg
used
Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected.
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø 100 mm -Piston rod: Ø 56 mm -Stroke: 25 mm -Admission piston rod: M45x1 mm -Total length extended: 355 mm -Ideal for building a hydraulic press -Weight: 36 kg
used
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg
used
Gear motor, electric motor -Speed: 23 rpm -Power: 7.5 kW -Design: B5 angle -Diameter shaft: Ø 70 mm -Protection class: IP54 -Dimensions: 910/500/H445 mm -Weight: 278 kg
used
Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg
used
Automation, PLC, switchgear -Type: KFD2-STC4-Ex1 -Manufacturer Part Number: 122580 -Number: 14x available -Price: per piece -Dimensions: 125/115/H20 mm -Weight: 125 g