kf engineering used for sale

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket, ditch cleaning bucket -Manufacturer: KFL, excavator bucket, digging bucket type T185 -Width: 880 mm -Height: 775 mm -Depth: 960 mm -Internal width of opening: 280 mm -Mount: Bore Ø 60 mm, dimensions see photos -The attachment to the spoon: can be changed by us for an additional charge. -Transport dimensions: 960/880/H830 mm -Weight: 228 kg

Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request

Sliding table saw milling machine Felder KF700S/03, built in 2006, good condition, incl. folding device for feed and tenon slotted hood, 5.5 kW S6, 3200 mm format table length, 3500,6500,8000,10,000 rpm, 780 kgPrices subject to change, errors, printing and typesetting errors excepted

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Haier, fan blower for air conditioning -Type: lKFD-35-1 -Voltage: 220 V / 35 W -Fan wheel: Ø 400 mm -Total dimensions: 400/190/H530 mm -Weight: 3.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Kleinschmidt, double-acting hydraulic cylinder stroke 25 mm -Type: KF22F-100 -Piston: Ø 100 mm -Piston rod: Ø 56 mm -Piston rod mount: M45x1 mm -Total length extended: 355 mm -Pressure range: max. 210 bar -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 243 x 330 mm -Weight: 36 kg/piece

This 5-axis KAFO KFO 620 5AX was manufactured in 2019. It features a spindle speed of 12,000 rpm, a tool changer with a capacity of 40 tools, and a spindle taper SK 40. The machine dimensions are 4210x2325x3108 mm, and it weighs 9500 kg. It includes a chip conveyor, spindle oil cooler, and is CE compliant. If you are looking to get high-quality milling capabilities consider the KAFO KFO 620 5AX machine we have for sale. Contact us for more information.

x-travel: 4.700 mm y-travel: 1.250 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mm max. workpiece weight: 10.000 kg T-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kW Speed range, stepless: 35 - 4.500 min-1 max. torque: 880 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mm workpiece length: 300 mm weight of tools max.: 25 kg feeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/min rapid in X/Y/Z: 25.000 m/min max. feed force X-Y-Z-axis: 10.000 N total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: 12,7 x 5,6 x 4,2 m Equipment / Accessories:Hea ...

Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002

Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible.

Manufacturer: ELIOG Type: KFG-5-1400 Year of Make: 1997 Electrical connected load: 32 kVA Connected load gas: 1450 kW Temperature max. 1400°C Condition of the facility: good, has been modernized in several steps We can offer the facility completely renovated.

General SKU265Y404 LocationBarneveld CEcheck Dimensions Cake capacity106 Main Features MaterialPolypropylene Pressure420 Bar Surface7 m2 Specified Features - Filterpress Filter presscheck Filter surface7 m² Recessed chamber platescheck Number of platens14 Number of frames0 Internal platen sizes550 x 550 mm External platen sizes630 x 630 mm Platen thickness55 mm Frame thickness15 mm Cake capacity106 l Central inletcheck ConnectionsDN50 Hydraulic closingcheck With hydraulic unitHawe HK448/1 Motor2,2 kW 400 V Manual operated closingcheck Manual openingcheck MaterialPolypropylene General MakeFilox Filtertechnik GmbH Serial1929 TypeKF063-13-30 Year of construction1997 With switchgearcheck Floorspace3,3 x 1,2 m Total height1,55 m Weight1500 kgFilterpressesPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchBiotechnologyAgrochemicalsPlast ...

Max. pressing force: 25 kN Convertible to: 16 kN Max. working stroke: 25.3/60 mm Table size: 150 x 200 mm Diarrhea hole in the table: 15 mm Stroke adjustment: 290 mm Space requirement: 800 x 580 x 650 mm Weight: 51 kg

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 3000mm/750mm/1500mm, Weight: approx. 250kg. Inspection possible by appointment.

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. ...

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,75 kW degree: 45° Grad turning speeds: 10.000 U/min milling height: 4,0 mm motor: 400 Volt range L-W-H: 560 x 300 x 450 mm weight: 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kallfass KFP-4000-4 Stacking Package length 2500mm Feeding to planer feeder Conveyor for spacers Net price

Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany

Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

3-digit monoblock filling and capping machine for filling liquids into suitable bottles (using rotary piston pumps), followed by automatic capping. Machine equipped with an automatic cap feeding system via vibratory feeder. Format range: - max. Ø 65 mm - max. height: 220 mm Output up to 3600 bottles/h.

x-travel: 1.704 mm y-travel: 1.210 mm z-travel: 1.003 mm Control: Heidenhain TNC 426 total power requirement: 65 kVA weight of the machine ca.: 16 t dimensions of the machine ca.: m Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Total power consumption: 65 kVA Machine weight: 16.000 kg Equ ...

Automatic screw filling machine for glass or plastic bottles, for liquid, semi-liquid and foaming products. Equipped: - Conveyor for infeed plastic pallet vials width 85 mm - length 4100 mm. - 4 stainless steel filling spouts with a diameter of 22 mm. - 4 filling pumps of 250 ml each. - Pneumatic drip cutting system. - Clean-in-place system of the filling spouts. - 8-cell tray for transferring vials to capping and screwing stations. - Vial presence control post. - Vibrating bowl feeding counter-clockwise caps. - PVC belt conveyor for cap transfer: Length 840 mm - width 60 mm. - Positive plug socket station. - Screwing station. - Traffic jam checkpoint. - Transfer lane for bad vials. - Outfeed conveyor with a length of 2200 mm. - Stainless steel cabinet with separate power on wheels. - General drive by motor-variator - Protective guards with safety. - Stainless steel f ...

Consists of: 5 pieces Blumenbecker-Technik GmbH, type: KFC, year of construction: 2018, own weight per car: approx. 552 kg, maximum permissible total weight per car: approx. 2,352 kg, permissible speed: 25 km/h, version: container dolly / baggage car / roller frame, construction: steel frame with roller conveyor, color: yellow, equipped with drawbar, equipped with front and rear coupling, solid rubber tires, total width approx. 1,680 mm, platform length approx. 1,545 mm, platform width approx. 1,200 mm, roller deck with 3 roller conveyors, transport of ULD containers and air cargo containers, standard DIN EN 12312-11 airport equipment, LD1, LD2, LD3 and similar ULD containers, air cargo containers, mail and cargo cargo, baggage containers between aircraft, terminal and sorting center, several units available on request, total length (drawbar up) 3,200 mm, total length (drawbar down) 3,92 ...

Consists of: 5 pieces Gustav Stiehl GmbH, type: KFW, year of construction: 1998, own weight: approx. 396 kg, load capacity: 1,500 kg, permissible total weight: 1,896 kg, max. speed: 25 km/h, ring coupling, steel body with removable fencing, loading length 200 cm, loading width 108 cm, total length 375 cm, total height 135 cm, CE marking, suitable for palletized and non-palletized load, designed for towing in trains behind a tractor, solid rubber tires, several units available on request. Auction-ID: A1-47396-2283

Incl. extensive accessories and range Auction-ID: A1-51519-1114

Jogger, Make Schneider Engineering, Model 0074, Year 1992, Size 75 x 115 cm, Size: 75 x 115 cm

On and including 2 pallets Auction-ID: A1-50889-112

Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually

14,500 litre, Stock number: T3371, Litre: 14500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm, Agitator: Yes , Agitator type: 3 pcs. 3-blade propeller, Agitator placement: From the top with bottom guide, CIP: Yes, 2 pcs., Working pressure double jacket: 4 bar, Inner diameter: Ø 2850 mm, Outer diameter: D 3000 mm, Total height: H 4400 mm

Conveyor belt system mobile, SID - TBS - 300KN-1, year of construction 2019, load capacity 300 KN, connected load 32A, mains voltage 400V / 50 Hz Auction-ID: A1-51285-340

Consisting of, among other things, hand augers, bump bars, brooms, shovels, compactor, TopCon fiber tripod, etcetera Auction-ID: A1-50889-131

Mantis Elite VISION Engineering Stereoscopic Microscope LOD'AIR Auction-ID: A1-51527-154

Thickness measuring system under different pressures THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-206

Auction-ID: A1-51527-126

VISION Engineering EVO Cam EVO CAM II High Definition Digital Microscope THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-43