135,190 used machines on RESALE, but how to find them? Machine Search
Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel
Tape washing machine, paddle washing machine for fruit and vegetables used Manufacturer: BINDER Maschinenbau GmbH Type SFB 80 Built: 1998 Power max 3000 kg/h VA stainless steel with stud strip width approx. 1000 mm Tub approx. 1500 x 1100 mm with 2 washing paddles Dimensions: approx. 3000 x 1300 x 1800mm A use for washing plastic is also conceivable. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pump Manufacturer: AL-KO Geräte GmbH Type: HW A 1001 INOX Item #: 112 461 Flow rate: 4 m³/h LBH: 380 x 230 x 480 mm
machine measurements: 850 x 1.800 x 1.450 mm machine weight: 360 kg power capacity: 0,7 kW Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.
Laboratory Ploughshare Table, Demonstration Machine Volume : 10 ltr. Material : Areas in contact with the product in stainless steel
We are looking for retail properties for sale without a broker! Criteria: vacant retail properties in need of renovation, such as DIY stores, supermarkets, hotels, apartment blocks in Germany and the Netherlands in cities with 20,000 inhabitants or more or near major cities. Please send all offers to the contact person: Svetlana Ament E-Mail: samentscholten-tanks Phone: 05924 255 485
We are looking for hotels for sale without a broker! Criteria: vacant hotels in need of renovation in Munich, Berlin, Hamburg and Frankfurt am Main or near major cities wanted Please send all offers to the contact person: Svetlana Ament E-mail: samentscholten-tanks.de Phone: 05924 255 485
used
Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open
Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight
Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040
Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;
Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg
Description Angle 180 Band width 400mm Width of curve outside (distance from edge to edge) 187cm
Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg
A conventional center lathe is available. An on-site inspection is possible.
Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.
Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.
Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm
Set up for bottles Throughfeed with indexing stars for object diam. 24 and 29 mm Without conveyor belt Weighing range 2 - 500 g Capacity max. 200 weighings/min e=d 0.1 g Passage from left to right Paper printer Bad ejection by pneumatic pusher Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) HC operating terminal Calibrated until 2014 Height adjustable Connection 115/230 V | 50/60 Hz
Continuous checkweigher: Specially set up for aerosol cans/bottles Ø 23 mm Belt run from right to left Load cell SW-D-FS Passage with cycle star for object Ø 23 mm Weighing range 0.1 - 500 g Capacity max. 100 weighings/min e=d 0.05 g Paper printer Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) HC operating terminal Without infeed conveyor up to cycle star and without outfeed conveyor between cycle star and infeed Camera box Coding station: Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) Camera control object bottom bad ejection camera/weight with blowing nozzles Connection 115/230V/50/60Hz
machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...
length: 1980 mm width: 670 mm height over floor: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inspection and control system for packaging lines with control panel and display. Power supply DC 18–32 V. Auction-ID: A7-49816-165
General Description Insulating glass production line manufactured by LiSEC Austria GmbH , comprising automated equipment for the production of double- and triple-glazed insulating glass units. The line includes a vertical glass washing and drying machine, polyurethane sealing system, metering unit and water treatment equipment for high-quality IGU manufacturing. Technical Details Manufacturer: LiSEC Austria GmbH Model: VHW-D20/V6 + DOS-1PUD Machine type: Insulating glass production line Year: 2017 Serial number (DOS-1PUD): 365-094505 Power supply: 400 V, 3/N/PE, 50 Hz Maximum operating pressure (DOS-1PUD): 6.0 bar Maximum glass height: 2,000 mm LiSEC VHW-D20/V6 vertical glass washer and dryer Polyurethane sealing robot LiSEC DOS-1PUD two-component PU mixing and metering system SAF-1000 filter unit GWT reverse-osmosis / water softening system LiSEC iPC-2008 industrial P ...
\" General Description Pneumatic precision seeder manufactured by RABE Agrarsysteme GmbH & Co. KG , model MonoSeed 8230 . Designed for precision sowing of maize, sunflower, soybean and other row crops. The machine is equipped with fertilizer placement, microgranule application and electronic sowing monitoring for efficient field operation. Technical Details Manufacturer: RABE Agrarsysteme GmbH & Co. KG Model: MonoSeed 8230 Machine type: Pneumatic precision seeder Year: 2011 Machine No.: 600238 Serial No.: 36-424662 8-row configuration PTO driven Hydraulically folding frame Transport width: 3,000 mm Hydraulic telescopic frame Hydraulic row markers 1,200 L fertilizer hopper Disc fertilizer coulters with auger metering Microgranule applicator Individual row shut-off MSC 8000 electronic sowing monitor AE 8X electronic row-control module Central transmission Ad ...
General Description CNC profile cutting and machining center manufactured by Schirmer Maschinen GmbH , model BAZ VU 90° . Designed for fully automated cutting and machining of PVC and aluminium window and door profiles. The machine forms part of an automated production line and is equipped with a Beckhoff PC-based CNC control system. Technical Details Manufacturer: Schirmer Maschinen GmbH Model: BAZ VU 90° Machine type: CNC profile cutting and machining center Year: 2020 Machine No.: 2344 900 Power supply: 400 V, 3-phase, 50 Hz Pneumatic supply: Max. 8 bar Beckhoff PC-based CNC control Touchscreen HMI Automatic profile infeed and outfeed roller conveyors Integrated cutting, drilling, milling and routing units CE marked Approximate machine weight: 4,000 kg Condition Very good used industrial condition. The machine appears complete and remains installed in a clean p ...
\" General Description Agricultural push-off trailer manufactured by Fliegl Agrartechnik GmbH , model Gigant ASW 271 . Designed for efficient transport and unloading of silage, grain, wood chips, compost and other bulk agricultural materials. The hydraulic push-off system allows safe unloading without tipping, making it suitable for low buildings and uneven terrain. Technical Details Manufacturer: Fliegl Agrartechnik GmbH Model: Gigant ASW 271 Machine type: Agricultural push-off trailer Year: 2023 VIN: WGJ112203PM402639 Vehicle category: R3a Gross vehicle weight: 18,000 kg Unladen weight: 7,000 kg Load volume: 35 m³ Tandem axle with steering axle Tyres: 560/60 R22.5 Lower K80 hitch Sprung drawbar Twin-line air brake system with ALB valve Hydraulic push-off unloading system Hydraulic rear door Hydraulic cover Swap body Grain discharge outlet Access ladder Condi ...
General Description Trailer-mounted hydraulic telescopic crane manufactured by Albert Böcker GmbH , model AHK 30/1400 . Designed for lifting and installation of construction materials, glazing, roofing components and building elements. The crane combines high lifting capacity with excellent mobility and is mounted on a road-towable trailer chassis. Technical Details Manufacturer: Albert Böcker GmbH Model: AHK 30/1400 Machine type: Trailer-mounted hydraulic telescopic crane Year: 2008 Serial number: 034228 Honda GX670 V-Twin petrol engine Maximum lifting capacity: 1,400 kg Maximum hook height: Approx. 30 m 360° slewing Hydraulic outriggers Hydraulic telescopic boom Wire rope winch Road-towable trailer chassis Noise level: LWA 101 dB Condition Good used industrial condition. The crane appears complete with telescopic boom, hydraulic outriggers, winch and Honda eng ...
Poly-clip System GmbH & Co. KG mobile automatic double clipper, type: FCAS 3451, number: 83017, 380 V, dimensions: 1100 mm x 1450 mm x 1940 mm.
Hermann Waldner GmbH & Co. KG mobile depositor, type: MultiDos, machine number: 2371, year of construction: 2010, 230 / 400 V, 50 Hz, 18 kW, 32 A, weight: 750 kg, fillings: 3240 per hour, total dimensions: 3080 mm x 1420 mm x 2270 mm.
Weber Maschinenbau GmbH mobile skinning machine, type: ASE 553, number: 637, 380 V, 50 Hz, 0.4 kW, working width: 490 mm, total dimensions: 800 mm x 600 mm x 1020 mm.
Yamato Scale GmbH 8 heads multihead weigher, model: ADW-508MWH, serial number: WG000496, 220-240 V, 1 Ph, 50/60 Hz, 5 A, weighing range: 20-2000 g, maximum speed: 100 pieces per minute, dimensions: 1950 mm x 1500 mm x 2400 mm.
General Description Industrial automatic ultrasonic cutting machine manufactured by Döinghaus Maschinenbau GmbH , model UBS 1/800 . Designed for automated portion cutting of bakery, confectionery and similar food products. The machine uses a servo-positioned ultrasonic cutting system with automated conveyor transport for accurate and repeatable portioning. Technical Details Manufacturer: Döinghaus Maschinenbau GmbH Model: UBS 1/800 Machine type: Automatic ultrasonic cutting machine Year: 2007 Serial number: 274.02.07.07 Operating hours: 27,178 h Power supply: 400 V, 50 Hz Rated power: 5.5 kW Rated current: 8.9 A Siemens SIMATIC operator panel Servo-positioned ultrasonic cutting head Twin conveyor / automatic product transport system Enclosed cutting station with safety guarding HSB Automation linear-axis system, S/N 34842, dated 05/2007 SEW-Eurodrive drive component ...
Stock number: SF046, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Laboratory filter, Construction: Hanging in rack, Top: Dished, Bottom: Bolted cover, Diameter: Ø 123 mm, Manufacturer: Seitz GmbH
maximum number of results exceeded
please refine your search
200 € 
