kemper 125 used for sale

Size: 800 x 1200 mm Equipments: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm paper 100-400 gm2 Solid Board max. 350 g Corrugated board max. 7 mm in production good condition

Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

: 1250 mm tank diameter / tank height: 1000 / 350 mm turning speed range: 920 / 1415 U/min voltage: 380 V volumn: 125 Liter power requirement: 1,9 kW weight of the machine ca.: 600 kg dimensions: 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 10144179 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

2450 h, with 3 hyd. Side brush, 3-cylinder diesel engine, high dump, sweeping width: 1.52 m, maximum theoretical sweeping capacity 30,500 sqm / h, 1810 kg net weight, dimensions approx. 2480 x 1440 x 2030 mm

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 10.0 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet with touch panel, feed water pump, ECO and the existing coarse and fine fittings.

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Volume (Ml): 125 ml // Format: Slim

Broaching machine Karl Klink Technical data can be found in the photo

General SKU393U1105 MakeKrauss Maffei LocationBarneveld CEcheck TypeVZU 125/2,5 Main Features Materialmildsteel/halar Motor30 KW Inlet diameter80 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity394 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight500 kg With bottom dischargecheck Manual operatedcheck Liquid outletcheck Motor30 kW (400 V, 1500 rpm (Ex)) Max. basket speed950 rpm Max. temperature40°C Materialcarbon steel ST52 1.0570, Halar coating General No.6000756 Year of construction2006 Mounted on foundation platecheck Floorspace2,5 x 2 m Total height1,7 m Weight5000 kg ATEX designedcheck Extra SpecificationsHalar coatedMetal contact parts Hastelloy-C Technical specs Extra information- halar coatedBasket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalAgro ...

General SKU393U1107 MakeKrauss Maffei LocationBarneveld TypeDZU 125/2,5 Main Features MaterialStainless steel/Halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity382 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight477 kg With bottom dischargecheck With scrapercheck Hydraulic operatedcheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V) Max. basket speed950 rpm MaterialHalar coating, Stainless steel 1.4571 (316Ti), Stainless steel 1.4581 (348) General No.9670 Year of construction1983, rev 2001 Mounted on framecheck Floorspace2.5 x 1,5 m Total height1.5 m Weight3000 kg ATEX designedcheckBasket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalAgrochemicalsBiotechnologyPlastic & polymersCatalysts & fillersFeed additi ...

General SKU429U1376 MakeFlottweg LocationBarneveld TypeZ42 Z3L Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter 3-Phase decantercheck Screw diameterMax. 420 / min. 226 mm Screw length1245 mm InletDia. 46 mm Liquid outlet110 mm Solids outlet700 x 260 mm Motor18,5/22 kW, 400 volt With variable speed drive1465/2935 rpm With hydraulic unitcheck Motor11 kW, 380 volt, 1460 rpm MaterialStainless steel 1.4307 (304L) General No.F 738 Year of construction1978 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,4 x 2,8 m Total height2,1 m Weight3000 kgConsumer wasteDecantersStarchAgrochemicalsBiotechnologyPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicFlottwegIndustries > Recycling > Consumer wasteCentrifuges > DecantersIndustries > ...

General SKU393U1106 MakeKrauss Maffei LocationBarneveld TypeVZU 125/2,5G Pressure Working pressure0.04 Bar Main Features Materialmildsteel/halar Motor37 KW Inlet diameter85 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity400 dm3 Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight500 kg With bottom dischargecheck Hydraulic operatedElektrisch Liquid outlet160 x 160 mm Motor37 kW (400 V, 985 rpm, (Ex)) Max. basket speed950 rpm Max. temperature25°C Materialcarbon steel ST52 1.0570, Halar coating General No.11179 Year of construction1991 Mounted on framecheck Floorspace1,60 x 2,50 m Total height2,10 m Weight5500 kg ATEX designedcheck Extra SpecificationsWith spare motor, 3,2-32 kW, 380 volt, 100-985 rpm, 311 Nm,&:nbsp:Metal contact parts Hastelloy-CHalar coatedBasket centrifugesPowdered foodsGe ...

General SKU446W1488 MakeSymex Schröder &: Boos LocationBarneveld CEcheck TypeCML 125 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume125 Ltr. Motor6.5 KW Specified Features - Processing vessel Reactorcheck Capacity215 l. (netto 125l) Vessel sizesDia. 650x1500 mm OutletDN50 With jacketvolume 20l Max. temperature151,3°C Motor6,5 kW, 400 volt, 2495 rpm With jacketcheck Processing vessels Closed stirring vesselcheck Capacity215 l. (netto 125l) Vessel sizesDia. 650x1500 mm Dished bottomvolume 20l Dished top sidecheck With covercheck Top connectionscheck OutletDN50 With jacketVolume 20 l. Max. temperature151,3°C With anchor stirrerwith scrapers With paddle stirrercheck Motor6,5 kW, 400 volt, 2495 rpm With homogenisercheck MaterialStainless steel 1. ...

General SKU345S668 LocationBarneveld MakeKrauss Maffei (D) TypeHZ 125/3.2 Si No.11437 Main Features MaterialStainless steel Motor55 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesDia:1250 x800mm Wall thickness20mm Max. loading weight498 Kg With hydraulic unit(controls) Motor55 kW 380 Volt (EEx de II c T4) With variable speed drivecheck Max. basket speed1220 rpm With scrapercheck MaterialStainless steel 1.4571 (316Ti) General Year of construction1994 Mounted on foundation platecheck Floorspace4,5x2,3 M Total height2,7 M Weight7000 KG ATEX designedcheck Extra Specifications-Filter area 3,14m².-Discharge with feedscrew.Peeling centrifugesGeneric medicinesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicKrauss MaffeiCentrifuges > Peeling ce ...

General SKU393U1104 MakeKrauss Maffei LocationBarneveld TypePZU 125 Main Features Materialmildsteel/halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity316 l Basket sizesø 1250 x 500 mm Wall thickness12 mm Max. loading weight550 kg With bottom dischargecheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V, 1465 rpm) Max. basket speed950 rpm Materialcarbon steel ST52 1.0570, Halar coating General No.8740 Year of construction1975 Mounted on framecheck Floorspace2.5 x 1,5 m Total height1.5 m Weight5000 kg ATEX designedcheck Extra SpecificationsHalar coatedMetal contact parts Hastelloy-CBasket centrifugesPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalAgrochemicalsBiotechnologyPlastic & polymersCatalysts & fillersFeed additivesE-waste & metalFood ad ...

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operatin ...

Key data: 1250 mm, 1 mm

with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361

Lathe SARO SP 1250x3000, working condition

Press force: 1,250 tons. Clear width: 585 mm Installation height: max. 480 mm Piston stroke: max. 355 mm Weight: 7,200 kg.

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

workpiece diameter: 125 mm module: 4 control: SIEMENS SINUMERIK travel -x axis: 105 mm travel -y axis: 40 mm travel -z axis: 500 mm workpiece diameter: 17 - 39,5 mm workpiece height: 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.

Baking area: 12m², decks: 5, deck dimensions X/Y: 1200mm/2000mm, loading guideline with 1kg bread: 30x5, heating type: oil, heating capacity: 90kW, version: Combitherm. Machine dimensions X/Y/Z: approx. 1900mm/3100mm/2450mm, weight: approx. 3000kg. Including lifting table. Documentation available. On-site inspection is possible.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1400 mm control: Siemens 840D travel -x axis: -80 / +1100 mm travel -z axis: 1060 mm workpiece height max.: 1400 mm max. workpiece weight: 8000 kg Shank diameter: 200 x 240 mm table turning speeds: 2- 400 U/min drive capacity - spindle motor: 44 kW max. torque on the faceplate: 14510 Nm rapid traverse: 12 m/min turning speed range - milling: 0,01 - 7,4 U/min speeds of tool: 4 - 3000 U/min work piece power: 22 kW Torque: 840 Nm total power requirement: 90 kVA weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840Dsl - C-axis - driven tools - tool changer 12-fold (driven tools) - complete enclosure - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 12500-600-500 RA2097 Technical data: Conveyor length (NL): 12500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R27 DT90S4/Th Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Ze ...

General SKU409X1238 LocationBarneveld MakeBusch Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor5.1 KW Specified Features - Vacuum pump Pump(Oil-lubricated rotary vane vacuum pump) Number of pumps:1 Capacity300 m³/h With motor5.1 kW (3-phase, 400 V, 50 Hz) InletDN65 OutletDN65 MaterialMild steel General TypeMM 1252 AV Mach.No.140026835 Year of construction2014 Floorspace0,9 x 0,5 m Total height0,65 m Weight300 kg Extra SpecificationsMaximum pumping speed: 300 m³/hOil type: Busch VE 101Oil capacity: 1.0 LCooling method: air-cooledInlet connection: DN 65Outlet connection: DN 65Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersVacuum pumpsFeed a ...

max. wheel diameter: 1250 mm gear width: 600 mm max. module: 16 min. module: 2 tooth width: 490 mm Zahnschrägungswinkel max.: 45 ° shifting: 200 mm max. number of teeth: 12 diameter of hob: 240 mm cutter length max.: 280 mm table diameter: 1020 mm milling spindle speeds (infinitely variable): 28 - 200 U/min power capacity: 25 kW weight of the machine ca.: 16,2 t dimensions of the machine ca.: 4,5 x 4,6 x 2,7 m equipped with: - universal hob head - change gears machine has been partly overhauled (electrical and machnical) and is now with programmable, digital Infeed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Six-axis industrial robots for floor mounting Suitable for all tasks with a checkpoint or path. The main areas of application are: spot welding, handling, assembly, application of adhesives, sealants and preservatives, machining, MIG/MAG welding, YAG laser welding. Nominal load: 125 kg Additional load at nominal load: 90 kg Maximum total load: 215 kg Complete with control Last maintenance September 2022.

Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle speed-12000 rpmSpindle  ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information.

This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine.

A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible.

This 5-axis DMG DECKEL MAHO DMC 125U was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 125U universal machining centre. Contact us for more information.

This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine.

This 3-axis SCM Record 125 N CNC Wood Machining Centre was manufactured in 2007. It features a robust 7.5 kW electrospindle reaching up to 18,000 rpm, and an automatic tool changer with 8 positions. The working area extends to 3400 x 1720 x 400 mm, supported by a vacuum pump of 90 m³/h. If you are looking to get high-quality milling capabilities, consider the SCM Record 125 N machine we have for sale. Contact us for more information.