kemper 125 used for sale

faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm floorplate 3250 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal keyway drawing machine of the Cardinal brand suitable for tooling, fixture construction, training and mold making Groove width 3 - 100 mm max. groove length 1250 mm Cgichwnnmv Tensile strength 6000 kg Drawing length 1250mm Motor 5.5 KW Weight 1650 kg Dimensions 1000x1650x1000mm

Year. 12/2016 type DC-Pro 5 125 1/1 H5 V24/6 Load capacity 125 kg Hakenweg 5 m Lifting speed 6/24 m/min Warranty - 6 months

Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t

pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t stroke: 37 mm no. of strokes: 30-240 Hub/min ram adjustment: 150 mm table surface area: 1200x1000 mm hole in the table: 500x180 mm tool hole in ram: Ø52 mm total power requirement: 50 kW weight of the machine ca.: 35 t dimensions of the machine ca.: LxBxH 3700x2300x3900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t stroke: 37 mm no. of strokes: 30-240 Hub/min ram adjustment: 150 mm table surface area: 1200x1000 mm hole in the table: 500x180 mm tool hole in ram: Ø52 mm total power requirement: 50 kW weight of the machine ca.: 35 t dimensions of the machine ca.: LxBxH 3700x2300x3900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1000 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1250 , Generator Hz: 60 , Generator Volts: 3300 , Generator Amps: 219 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-4012twg2-generator-125 0-kva-used/189, , = More information =, , Empty weight: 9.730 kg, Type number: 4012TWG2 Generator 1250 KVA

Engine Brand: KAWASAKI, Conditie: USED, Engine Cooling Type: Oil Cooled , Engine Color: Grey , Working Hours: 1232 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1180 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1250 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 1804 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/203827, , = More information =, , Empty weight: 12.000 kg, Type number: Kawasaki M1A-01 GENERATOR 1250 K

Key data: 350 mm, 1250 mm, 2500 1/min

Stock number: 3954 CNC LATHE Manufacturer: Dainichi, Type: F35 - 1250 Machines NO.: 24350 , Year of manufacture: 1990 Specifications: Max. circumferential diameter 350 mm dia. Max. turn. About Bed 550 mm Dia. Turning length 1250 mm Turning over planing slides 400 mm dia. Main motor power 22 kw Main spindle speed range 25-2500 rpm Spindle bore 90 mm dia. Tool turret with 12 stations Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Length: 3750 mm, Height: 1800 mm, Width: 1700 mm, Weight: 6500 kg

2004 Kuka KR 125L90-2 TJ Operational hour: 36.700 Controller: KRC1 KR 125 L90-2 TJ | KR C1 Year of manufacturing: 2004 Controller type: KR C1 Maximum reach: 2.410 mm Payload: 125 kg External axes: Spare parts: robot type discontinued, spare parts availability limited Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter: 1.600 mm max. swing diameter: 1.700 mm control: Siemens - 840D faceplate turning speed range: 1 - 320 U/min rapid traverse: 3.000 mm / min feed range: 1 - 3.000 mm/min size of pallet: 1.168 mm numbers of pallets: 2 main drive: 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: BvL Series : Ocean RW Model: 1250 2T Year of Manufacture: 2019 General Data - Max Length: 1000 mm - Max Width: 750 mm - Max Height: 750 mm - Diagonal: 1250 mm - Max Load Capacity: 500 daN = 500 kg (even load distribution is required to avoid static issues) - Operating Voltage: 3 x 400 V, N+PE, 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 125 tons CNC control: AMADA OPERATOR II graphic 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Mot. adjustable back gauge Projection: 300 mm Stroke: 180 mm Working height: 960 mm Infrared photocell vertical and horizontal : SICK Motor power: 11.5 kW Dimensions (length x width x height)): approx. 3500 x 2200 x 2900 mm Weight approx. 9 tons Accessories: 1 set of AMADA tools 1 die : V50-35-22-16

Pile turner Busch SE 125; cleaned and tested; Platform size 1250x950mm; Load capacity 1000kg; Max. Stacking height 1350mm; Pressure relief flaps. Pile turner Busch SE 125; cleaned and checked; platform size 1250x950mm; carrying power 1000 kg; max.pile hight 1350mm; pressure control flaps.

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataRapid traverse longitudinal/transverse/vertical60/60/60 m/minFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerType of magazineChain ApplicationUniversal Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 1000 x 800 mmTool magazine,chain, 60 pockets ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Cross1000 mmLongitudinal1250 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring  ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Transverse stroke490 mmLongitudinal stroke1200 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min

4x CSW8593-125Y-40P screw compressors, two of which served as replacements, so NEW and not yet in use.

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

Technical data: Type : Casting resin transformer Finish : Dry Make : ABB Year of construction : 2000 Condition : Used Rated power : 1250 KVA Medium voltage : 10 KV Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type :AN Gross vehicle weight : 3090 kg Nationwide delivery included.

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

Stock# U2443-3 Used twin screw pump by Bornemann type SLH 125-38. Contact parts stainless steel. Feeding inlet has diameter 80 mm, discharge outlet 65 mm. Pump has working output in range from 3 to 5.5 m3/h. Working rotation in range 328-468 rpm. Product viscosity up to 10000 cSt. Pump is driven by el motor 11 kW, 720 rpm, 380/660 V, 50 Hz. Feeding pressure up to 15,8 bar, suction pressure -0,20 bar. Self-priming pump in hygienic design. Mounted on stainless steel platform.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13.0 bar Increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control section, control cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 1997 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet, feed water pump, ECO and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2000 equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring s ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineMax. tool length230 mmNumber of tools24 Max. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...

spindle diameter: 125 mm x-travel: 1.500 mm y-travel: 1.250 mm z-travel: 1.000 mm w-travel: 550 mm table surface area: 1.000 x 1.250 mm workpiece weight: 6.000 kg quill stroke: 550 mm tool taper: ISO 50 number of spindle speeds: 5-3.700 U/min. max. torque: 2012 Nm feed speeds: 1-6000 (x-Achse) mm/min feed speeds: 1-6000 (y-Achse) mm/min feed speeds: 1-6000 (z-Achse) mm/min rapid traverse x/y/z: 15/ 15/ 15 m/min dimensions of the machine ca.: 7,51 x 5,07 x 3,33 m : 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Brand new Schechtl segment bending machine Sheet width: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.8 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle: 150 mm

Ho Chun UH-1250A - CNC Bed Milling Machine - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods in all axes - Ball screws - Hydraulic tool feeder - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened membranes - Plastic-coated counter guide -Electromagnet. Main spindle brake - Automatic central lubrication - Integrated coolant system - Steel telescopic cover for transverse path - Steel telescopic cover for longitudinal travel - Work light - Year of construction 2011 Specifications Workbench: - Table clamping surface: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel: - X-axis longitudinal travel: 1250 mm - Y-axis transverse travel: 540 mm - Y-axis - transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and stand: 500 mm Stand: - Z-axis ...

Engine power of the bowl, kW: 1,5 Motor power of knives, kW: 37 Bowl volume, l: 125 Bowl rotation speed, rpm: 10/ 20 Two-axis speed in cutting mode, rpm: 2000/4000 Two-axis speed in forward and reverse mixing mode, rpm: 80/160 rpm Dimensions (WxDxH) max, mm: 2140 x 1375 x 1590 Weight, kg: 2200

Tetra Pak A3 Compact Flex – 125 ml Slim Aseptic Filling Machine (2013) High-performance aseptic carton filling machine designed for efficient packaging of liquid food products in 125 ml Slim cartons. The Tetra Pak A3 Compact Flex offers reliable operation, compact installation, and flexible packaging capabilities for modern beverage and dairy production facilities. General Information - Manufacturer: Tetra Pak - Model: A3 Compact Flex - Year of Manufacture: 2013 - Package Format: 125 ml Slim - Production Capacity: 9,000 packs per hour Machine Design and Dimensions - Required Floor Space: approx. 20 m² - Machine Height: 4.3 m - The compact design allows easy integration into existing production environments while maintaining high production efficiency. Key Features High-Speed Production - Production capacity of up to 9,000 packs per hour - Reliable performance fo ...

TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Double Toggle Jaw Crusher Type: KS 1250/1000/04 Year of Make: 1997 Inlet opening (width x height): 1,250 x 1,000 mm Net weight: approx. 60 t. Drive power: 160 kW Grease lubrication pump: yes SPECIFIC COMMENT - Incl. inlet box - Incl. complete set of crushing jaws - Incl. printing plates and spare parts - Eccentric swingarm torn, spare swingarm available - Ideal for crushing hard rock

bore capacity in steel (diameter): 50,0 mm arm length: 1.350 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kannegiesser belt conveyor belt conveyor GF 1250-680-600 RA1816 Kannegiesser conveyor belt is from 2020 and is in mint (used) condition. The belt conveyor has a motor drive from Bauer with frequency converter to regulate the conveyor speed. The pictured supports are included in the delivery. Technical data: Conveyor length (NL): 1250 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height(BH): 800 - 1130 mm ascending Number of support feet: 2 pieces Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 07/2020 Special feature / accessories: 1x Bauer gear emtor with frequency converter 2x return pulley cover Optionally available: Side guides one and both sides All p ...