kellenberg used for sale

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Ready for delivery, with 12 month warranty in germany and neighbouring countries! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality! -Digital display in 2 axes. Resolution x-axis 0.5my -Modern workpiece headstock with cone  ...

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

centre height: 175 mm centre distance: 1000 mm grinding wheel dia. x width: 400 x 50 / 225 x 20 mm grinding wheel hole diameter: 127 / 76.2 mm grinding wheel turining speeds: 1500-2200 U/min cross slide - travel: 245 mm workpiece spindle head:: turning speed range - stepless: 6-600 U/min spindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 ° weight of the machine ca.: 3.1 t dimensions of the machine ca.: 2.85 x 1.75 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible.

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra ch ...

Key data: 450 mm, 1500 mm, 225 mm

Stock number: 3995 CNC CYLINDRICAL GRINDING MACHINE Manufacturer: KELLENBERGER, Type: KEL-Varia 225 - 1500 Machines NO.: 650533, Year of manufacture: 2002 Specifications: Grinding length 1500 mm Gr. grinding diameter 450 mm Z-ash 1650 mm X-ash 320 mm Caschen 0.001 degree B ash 0.001 Large stone diameter 500 x 80 x 203.2 mm Control Heidenhain 1830 m Fabr. Accessories: Cooling water system. Grinding hubs 2 pcs Weight: 6000 kg

grinding diameter: 400 mm grinding length: 1000 mm centre height: 200 mm control: Fanuc 0i-F workpiece weight: 100 kg travel -z axis: 1150 mm measuring system resolution capability: 0,0001 mm rapid traverse: 20 m/min travel -x axis: 365 mm rapid traverse: 20 m/min grinding wheel size: 500 x 80 mm b-axis indexing accuracy +/-: 1 ° spindle motor: 7,5 kW workpiece turning speeds: 1 - 100 U/min grinding head swivelling: 240 Grad tail stock: taper in tailstock MT: 4 tailstock quill stroke: 49 mm total power requirement: - kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,4 x 2,2 m 3-axis cylindrical grinding machine equipped with: - CNC control Fanuc 0iF - B-axis - Coolant belt filter system - Tail stock - UR grinding head for internal, external and surface grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between points: 1000 mm, Height of points: 175 mm, CNC brand: FANUC, CNC model: Oi-TD, Ø max to rectify: 350 mm, Total power: 40 KVA, Z-axis travel: 1115 mm, X-axis travel: 260 mm, Working wheel dimensions (od x id x width): Ø400 x Ø125 x 50 mm, Motor power of the headstock: 6 CV, Headstock rotation: -30° / +120°, Spindle head rotation: 200º, Cone headstock chuck: MORSE 5, tailstock cone: MORSE 4

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5 Micro-adjustment for the standard workhead Dressing device ...

An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible.

This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit.

KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg

This Kellenberger R125 x 600 cylindrical grinding machine was manufactured in 1984. It features a grinding diameter of 250 mm, a length of 600 mm, and a centre height of 125 mm. The machine can handle a maximum workpiece weight of 130 kg and includes a tailstock with a quill travel of 30 mm. For more information about this machine, please reach out to us.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. -Reitstock mit Feinverstellung -Inn ...

Manufacturer: Kellenberger Model: Kel-Vision URS 125/430 Machine Type : Grinding Machine Condition : Defective Electrical Specifications - Supply voltage: 3 x 400 V - Frequency: 50 Hz - Working voltage: 3 x 400 V - Control voltage: 230 V - Nominal current: 28.5 A - Main fuses: 35 T Find more here - / Contact us at -

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis C-Achse zum Polygonschleifen B-Achse mit Handschwenkung Schleifscheibendurchmesser links 400mm Schleifscheibendurchmesser rechts auf Anfrage Innenschleifeinrichtung Reitstock mit Feinverstellung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customers premises from 2025 up to and including January 2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

internal grinding spindles: . centre height: 125 mm grinding length: 1000 mm grinding wheel diameter: 400 & 225 mm weight of the machine ca.: 3.1 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Kelco 90 total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Passive Lämgspositionierung Movomatic TMP91 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Komplett überholt mit Umbau auf Technik der modernsten Ausführung. -Neuer Schaltschrank -Modernes Hydraulikaggregat -Moderner Werkstückspindelstock -Moderner Reitstock mit Feinverstellung -Moderner Steuerblock,Zustellung,Getriebekasten -Innenschleifvorrichtung für Sp ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Fanuc 310is total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movo ...

Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg

Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Max. diameter to be rectified: 250 mm, Height of points: 125 mm, Working wheel dimensions (od x id x width): Ø 406 x Ø127 x 50 mm, Max. grinding wheel diameter: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, CNC model: 18TB, Main engine power: 7.5 Kw, Z and X axis resolution: 0.1 µmm, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, tailstock cone: MORSE 4, Rotation speed of the workhead: 8 to 800 rpm, Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg

Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg

Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Working wheel dimensions (od x id x width): Ø406 x Ø127 x 50 mm, Max. diameter to be rectified: 250 mm, Ø max to be rectified: 250 mm, Height of points: 125 mm, Max. grinding wheel diameter: 500 mm, Ø max. molar: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, cnc brand: FANUC, CNC model: 18i-T, cnc model: 18i-T, Main engine power: 7.5 Kw, Ø max. wheel: 400 mm, Z and X axis resolution: 0.1 µmm, main motor power: 7.5 Kw, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, Distance between centers: 430 mm, Workpiece head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the workpiece head hole: 38 mm, Rotation speed of the workhead: 8 to 800 rpm, Accessories: FELSOMAT gantry loader with SIEMENS CNC; Coolant system with paper filter; Forkardt automa ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert ( ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...

Case packer für 10 and 6 packs of 330 ml disposable bottles. Inclusive videojet printer dating machine construction year 2016. The line is controlled via a S7 Touchpad., Voltage: 400 V, Compressed air: 6 bar, Length: 5,4 m, Width: 1,15 m, Height: 1,95 m, Weight: 700 kg, Base construction: on feet, Features: Inkjet Dating machine construction year 2016, hot glue unit

STUDER S30-1 Outer Round Grinding Machine Grinding machine CNC NC Switzerland Grinding Machine Year of construction: 2007 Center width: 650 mm Feature Value Center width 650 mm Tip height 125 mm Max. grinding diameter 250 mm Max. workpiece weight between tips 130 kg X-travel 255 mm Z-travel 700 mm Table swivel range ±10° Express infeed X 60 mm Working feed X 0.012–6 mm/min Z-axis speed 50–5,000 mm/min Smallest automatic table travel 1.5 mm Reversal accuracy table 0.02 mm Grinding spindle holder Ø 63 mm Grinding wheel standard 400 × 63 × 127 mm Option grinding wheel 500 × 63 × 203.2 mm Grinding wheel circumferential speed 35 or 50 m/s Grinding spindle motor 5.5 kW, optional 7.5 kW Workpiece spindle MT5, 30–1,000 rpm (hydrodynamic) or 10–600 rpm (roller bearing) Tailstock MK3 Total connected load 13 kVA Compressed air 5 bar Machine weight appro ...

Kellenberger Kel-Viva UR 175 1000Year of manuf. : 2004 Control : Heidenhain 1830 M - KELCO 110/120 Grinding length : 1000 mmCentre width : 1000 mm____________Description:Workpiece headstock:Swivel range:-10°/+100°Speed:800 rpmCenter height:175 mmInternal mounting cone:MK5External short-cone mounting:DIN 55026Max. workpiece weight:100 kgGrinding headstock:Configuration:Tandem grinding headB-axis:-210°/+30°Internal grinding unit:Internal grinding spindleGrinding table (X-Axis):X-axis:320 mmMaximum speed:7.5 m/minResolution:0.1 μmLower table (Z-axis):Centre-to-centre distance:1,000 mmZ-axis:1,150 mmMax. speed:15 m/minResolution:0.1 μmEquipment:Coolant supply:KSS system with filterEmulsion mist separator:MechanicalTailstock:MK4, stroke 48 mmTool wear detection:Movomatic GapcontrolBalancing:Elaso EB 500Workpiece measurement:Marpos T25Set-up:Electronic handwheelAccessories:Various  ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Kelco total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. tip height 175 mm, max. tip distance 750 mm, max. clamping diameter 350 mm, working surface 1160x140 mm, infinitely variable table speed 0.1-6.0 m/min, 6 workpiece speeds (30-400 1/min), quill retraction 18 mm, 2 grinding spindle speeds (1700/2200 1/min), grinding wheel bore 127 mm Auction-ID: A1-48659-8