KEKEISEN used machine for sale

Manufacturer KEKEISEN Type UBF-D 7000 / 23 Year of construction 2013 Control iTNC 530 Heidenhain - 2 pallets, can be used individually or coupled. - Universal milling head automatically swivelling A: +/-90° / B: +/-90° - 6 axes - incl. NC rotary table 1,250 x 1,250 mm (fibro) - Operating hours: approx. 17,800 h - Current on / approx. 5,700 h program run x-travel 7,000 mm y-travel 1,200 mm z-travel 2,300 mm Speed range - main spindle 20 - 6,000 min/-1 Drive power - main spindle 30 kW Gear stages 2 Transmission stage 1 20 - 1.250 min/-1 Gearbox stage 2 1,250 - 6,000 min/-1 Tool holder SK 50 Swivel A+B: +/-90° Division 1 ° Workbench: Table clamping surface 7,000 x 840 mm Pallet 1: 2,500 x 840 mm Pallet 2: 3,300 x 840 mm table load 7,000 kg Number of T-slots 9 Tool magazine: Number of tool positions 60 ...

X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024.

Description: Vertical travelling column machining centre Machine number: F 44 088 Drive power: 23 kW (three-phase current) Rapid traverse: 0-30 m/min (Z-axis 20 m/min, C-axis 6 m/min) Milling head position: Vertical / horizontal Chip conveyor: Tecnimetal Tool changer: Kekeisen KWVA 48 Throughfeed recooling unit: BKW Edge splitting filter: Mahle Pi 72 NC rotary table Radio measuring station: M&,H 20.00 Internal coolant supply z-motion: 800 mm, x-motion: 1,200 mm, y-motion: 650 mm, control: Heidenhain TNC 430 M, taper: SK 50, toolchanger positions: 48, turning speed range: 20-7300 rpm, feed range: 0-5000 mm/min, total power requirement: 50 kW, weight approx.: 17,000 kg, Approx. Onsite Dimension. (l x w x h): 5,300 x 5,300 x 3,300 mm

x-travel 3000 mm y-travel 650 mm z-travel 800 mm control Heidenhain 426/430 table dimensions 3.500 x 750 mm turning speed range 7300 U/min with transmission tool taper SK50 tool magacine with 48 Plätzen IKZ KNOLL slewability of milling head + / - 90 integrated rundtisch 750mm 2x made by FIBRO weight of the machine ca. 24 t dimensions of the machine ca. 8,4 x 4,4 x 3,6 m Table max. 2,500 kg load chip conveyor without vise prepared for delivery

Multi-side processing machine, multi-edge automatic lathe KEKEISEN type Tornomat 2 Multi-edge impact lathe for 4-edge and 6-edge machining, square automatic lathe Masch. No. 668 361 Year of construction approx. 1975 Workpiece diameter max. 35 mm Working range 6-edge: max. SW 32 mm Working range 4-edge: max. SW 24 mm Spindle speed 250, 355 , 450 rpm. Mains connection 380 Volt, 50 Hz - equipped with 3 fold knife head for hexagonal hydraulic feed movement 0.1 to 0.5 mm/rev - Hydro-mechanical collet clamping- Workpiece clamping diameter in the built-in collet 10 mm- Control cabinet adjacent (L x W x H 700 x 350 x 1300 mm) Space requirement automatic lathe L x W x H 1250 x 850 x 1250 mm Space requirement on pallet L x W x H 1650 x 850 x 1300 mm Weight 1.4 ton. good condition; used

x-travel: 2000 mm y-travel: 900 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 surface area: 2200x960 mm turning speeds: 20-1700 U/min Tool bore: SK 50 type: DIN 69871 mm rapid traverse: 10 m/min total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7x4,2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.