kasto speed used for sale

x-travel: 1000 mm y-travel: 500 mm z-travel: 300 mm Control: CNC C00 spindle turning speed - stepless: 10000 U/min spindle motor: 10 kW distance table - lower edge spindle: 180 - 480 mm rapid traverse: 50 m/min table surface area: 1100 x 500 mm total power requirement: 9,5 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,5 x 2,4 x 2,5 m - CNC control CNC-C00 - ATC 14-tools (BT 30) - Coolant through Spindle less than 5000h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details.

Key data: 190 mm, 190 mm, 250 mm

Trotec SpeedMarker 300 – Laser Marking Machine | YOC. 2021 | Laser new 2025 For sale is a Trotec SpeedMarker 300 in very good condition. The laser source was completely renewed at the end of 2025 – the machine is technically as good as new and ready for immediate use. Technical data: - Manufacturer: Trotec Laser - Model: SpeedMarker 300 - Year of construction: 2021 - Laser source: new (renewed at the end of 2025) - Marking software: SpeedMark - Cooling: Air-cooled - Included: Extraction system Areas of application: - Marking and engraving of metals (stainless steel, aluminum, brass, etc.) - Marking of industrial parts - Serial numbers, barcodes, logos, data matrix codes

Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system

Laser marking machine manufactured in 2014. This Trotec Speedmarker 300 features a nominal power of 60W and includes a rotary attachment for enhanced versatility. The workstation is designed with an enclosed Class 2 safety housing, ensuring operator safety while providing visibility. If you are looking to get high-quality laser marking capabilities, consider the Trotec Speedmarker 300 machine we have for sale. Contact us for further details.

Brother Speedio S700X2Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo

The machine is in good technical condition, testing possible after prior agreement. 12 thousand revolutions central cooling water/air only in single-shift operation number of hours on the spindle see photo spindle changed in 2020

Year of manufacture: 2004 Control system: Fanuc 16i-TB Technical specifications MAIN SPINDLE - Max. bar diameter: 12 (15) [mm] - Travel: 120 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6 Nm Powered tools: Tool drive power: 1.1 kW Max. speed: 6,000 rpm Tools: Number of tools: up to 20 (some of which are driven). Driven tools: 4–6, for milling, drilling and threading operations. Tool holder: ER collets or similar systems. Rear machining: 4 stations IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 [mm] Bar length: 3200 [mm] Small fire extinguishing system / Kraft und Bauer fire extinguishing systems Operating manual Parts separator Chip flushing system The machine can be viewed by appointment. Subject ...

Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Max. bar diameter: 12.7 mm Max. turning length: 120 mm Rapid traverse speeds: X-axis (linear): 40 m/min Linear motor cooling: Separate cooling unit for thermal stabilisation of the linear drive. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter-spindle speed range: 0 – 12,000 rpm Travel range Z2: 150 mm C-axis: Fully-fledged C-axis integrated Tool carrier (linear slide system) Total number of tools: up to 18 positions Driven tools: 3 to 5 positions for cross-machining Speed of driven tools: max. 6,000 rpm Loading magazine: FMB Minimag for the diameter range of 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Small fire extinguishing system / Kraft und Bauer object fire extinguishing system ...

Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 The machine underwent a complete factory overhaul by CHIRON in 2013. Operating hours: approx. 80,374 h Spindle replacement: March 2021 – spindle hours: approx. 8,000 h Last maintenance performed: January 2024 Technical Specifications: Control: Siemens 840D (PCU50, NCU572.4) NC swivel head High-speed package: Motor spindle up to 12,000 rpm, 140 Nm Travels: X 6,000 mm / Y 630 mm / Z 550 mm Rapid traverse in X / Y / Z: 60 m/min Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal Production package: Scraper belt conveyor, discharge height 1,050 mm Preparation for internal coolant supply (IKZ) Vacuum rotary filter KNOLL VRF250 (for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HP pump and variable valve Automatic loading doors Central partition for pendulum ma ...

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: EWM, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding power: 500 A -Features: Water-cooled, remote control -Wire feeder case: HIGH-SPEED integral 4X4S 4-roller drive -Dimensions: 1370/820/H1500 mm -Weight: 242 kg

Complete packaging line for paper sacks (20kg) including palletizers and pallet stretchers. For bagging of e.g. horse feed. The plant is still in operation until November 2026 and can be visited.

This 4-axis DMG Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information.

x-travel:550 mm y-travel:300 mm z-travel:425 mm CNC-control:Sinumerik table-size:950 x 350 mm max. table load:500 kg spindle taper ISO:30 spindle turning speed range:20 - 10500 U/min spindle drive motor:5,5 kW tool change unit:12 Pos. coolant:inkl. voltage:380 V tool adaptor:Steilkegel 40 groove width:32/28 mm no. of flutes:3 rapid speed:40.000 mm/min total power requirement:15 kVA weight of the machine ca.:3,3 t chip conveyor:inkl. dimensions of the machine ca.:2000x 3000 x2500 mm Documents:vorhanden - Serial Number: 186 - 78 - Control: FANUC O-M - with various tool holders - coolant equipment

Auction-ID: A1-46933-114

Producer: KASTO, Type: HBA 420 AU, C93I8EN Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external Chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm

Machine number 6418106052 material discharge length approx. 1600 mm with feed length approx. 2200 mm max. material span approx. 250 mm (measured) max. material clamping height approx. 200 mm (measured) with discharge roller conveyors, 2 pieces each approx. 1000 mm length max. load t/m total material removal length approx. 4000 mm with spare saw blades, approx. 8 pcs.Reference : Prologtec Lot 3

Machine number 6418106052 material discharge length approx. 1600 mm with feed length approx. 2200 mm max. material span approx. 250 mm (measured) max. material clamping height approx. 200 mm (measured) with discharge roller conveyors, 2 pieces each approx. 1000 mm length max. load t/m total material removal length approx. 4000 mm with spare saw blades, approx. 8 pcs.Reference : Prologtec Lot 3 Auction-ID: A7-46763-126

Cutting length: approx. 300 mm incl. clamping system Clamping width: approx. 200 mm Auction-ID: A7-46287-81

Type: Automatic Bandsaw Brand: KASTO Model: SSB 260 VA Year of manufacture: 1989 Application: Automatic metal cutting (bars, profiles, solid materials) Equipment: - Hydraulic clamping system - Automatic feed system - Roller conveyor infeed - Integrated control panel with digital display (Minipos 807) - Coolant system (integrated base tank) Technical Data: Voltage: 380 V Frequency: 50 Hz Power: approx. 6.0 kW Condition: Used Auction-ID: A7-45993-76

Machine type: Automatic Band Saw Manufacturer: KASTO Model: SSB 260 VA Control: Semi-automatic / automatic feed control panel Serial number: n/a Year: n/a Working hours: n/a Cutting capacity (round): approx. 260 mm Cutting capacity (flat): approx. 260 x 260 mm Feed system: Automatic material feed with clamping vice Saw type: Horizontal band saw Blade speed: Adjustable (see feed & speed chart on machine) Material feed: Hydraulic feed system Equipment: - Roller conveyor infeed - Hydraulic clamping vice - Coolant system (switchable) - Control panel with emergency stop - Feed length adjustment with handwheel and counter Remarks: Industrial metal band saw in used condition. Equipped with automatic feed and adjustable parameters. Visible signs of wear and use. Functionality not tested. Own mass: approx. 1,800 kg Dimensions (LxWxH): approx. 1,800  ...

Make: KASTO Type: Automatic Bandsaw Model: KASTO 460 Manufacturer: KASTO Maschinenbau GmbH & Co. KG, Germany Cutting capacity (approx.): 460 mm Machine configuration: - Automatic horizontal bandsaw - Hydraulic feed system - Integrated roller conveyor (infeed/outfeed) - Clamping vise system - Coolant system (integrated) Drive: - Electric motor drive - Hydraulic unit with pump Control: - Control panel with push buttons and selectors - Emergency stop - Adjustable feed and cutting parameters Equipment: - Roller table / material support - Coolant tank and pump - Machine lighting Condition: Used Own mass: approx. 2,500 kg Dimensions (LxWxH): approx. 2,500 x 2,300 x 1,800 mm Auction-ID: A7-45993-29

Producer: KASTO, Type: HBA 420 AU, C93I8EN Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external Chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm Auction-ID: A1-47017-107

Producer: KASTO Type: HBA 420U Year of Make: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Fully automatic NC horizontal band saw 1 chip conveyor, 1 external chip conveyor, 1 person. Driven Roller Conveyor approx. 450 cm. Auction-ID: A1-47017-106

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Rotary vane vacuum pumps lubricated 2-stage Status: Rebuilt warranty: 12 months Manufacturer: Leybold Type: Trivac D16B Suction capacity: ca. 16 m³/h Discharge pressure: approx. 5x10e-3 mbar Engine: 400V DS Resources: Mineral oil Accessories: owner's manual Oil mist separator optional Delivery time: By appointment (subject to prior sale) Spare parts, equipment or alternative pump on request.; ready for operation

new all stainless steel turn table diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed 0,12 kW

TO WHOM IT MAY CONCERN; WE VE 6 PCS USED WOODWARD 721 DIGITAL SPEED CONTROL AT OUR STOCK. WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL ON BELOW PART NO 8280 - 303 PART NO 9987 - 206 CTRL ASSY 8237 - 951 REV. E CTRL ASSY 8237 - 735 REV. G ALL PANES LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled

Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

NORIS Speed ​​Sensor Part number - 30353

Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition

High-speed cutter with 72cm cutting width Hydraulic pressure infinitely adjustable Electrical connection 400V/50Hz

PAD 63 A high-speed press was built in 1978 in Poland by Fabryka Pras Automatycznych Warszawa-Włochy. The machine is used for precision machining of uncoiled sheet metal. All machining processes, i.e. stamping, punching, cutting and bending are performed fully automatically with a high press force of 63 tonnes. The PAD 63A high-speed press on offer has undergone an overhaul. The total weight of the machine is 6300 kg. Technical specifications of the PAD 63 A press - maximum press force: 63 t - slider stroke number: 100-320/min - slider adjustment: 60 mm - maximum distance from work table to slider surface: 320 mm - distance between columns: 480 x 400 mm - motor power: 15 kW - grease pump motor power: 0,4 kW - weight of the PAD 63 A machine: 6300 kg

Standard high-speed cutter with 82cm cutting width Hydraulic pressure infinitely adjustable incl. 2 knives Electrical connection 400V/50Hz

Tweedy 10 high speed mixer Serial: B1102 10Kg high speed bakery mixer, manual tilt discharge,

Speed control unit GAC-ESD5550 3 pieces available, 1x with original packaging, 2x without

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition