kasto speed used for sale

A used single-leaf envelopment system KAS Mailmaster 465 Speed Max: Up to 4000 cycles/hour Packaging thickness:: up to 15mm Envelope sizes: 229 mm x 110 mm to 335 mm x 240 mm

Equipments: Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage

A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.

Circular Metal Saw manufactured in 2008. This KASTO KASTOspeed C 9 is designed for sawing steel and non-ferrous metals, featuring a cutting range of round ø15-90 mm or 15x15-80x80. It includes a powerful 11 kW saw unit drive motor, enabling cutting speeds of 50-700 m/min. If you are looking to get high-quality sawing capabilities, consider the KASTO KASTOspeed C 9 machine we have for sale. Contact us for further details.

KASTOtec AC 5 for bi-metal or carbide The KASTOtec AC was developed for the optimal use of the tool technologies bi-metal, bi-metal plus, carbide and carbide plus offered on the market. ! Machine is currently being refurbished ! Cutting Area Round (mm): 530 Max workpiece height (mm): 530 Max width workpiece (mm): 630 Max. Rectangular Dimension (mm): 530x630 Max. dimension square (mm): 530x530 Max. material feed length, single stroke (mm): 600 Multiple feed rate (mm): 9999 Shortest Section Length (mm): 6 Shortest off-piece length (mm): 35 Dimensions saw blade (LxHxW mm): 7675x54x1.6 Saw Blade Speed (m/min): 30-300 Motor power (kW): 15 kW Machine dimensions (LxWxH mm): 2,235 mm x 5,335 mm x 2,820 mm Machine weight (kg): 6550 All prices are net plus VAT. VAT We expressly reserve the right to prior sale and errors Brokerage offer for RG-Tools GmbH

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.

An automatic Kasto horizontal band saw is available. Cutting diameter: 330mm, Cutting capacity X/Y: 330mm/350mm, Material feed length: 500mm, Min. cut-off length: 10mm, Min. cutting diameter: 10mm, Min. remnant length (automatic mode): 60mm, Cutting speed: 150m/min, Saw blade dimensions X/Y/Z: 5090mm/41mm/1.3mm, Material support height: 700mm. Machine dimensions X/Y/Z: approx. 1350mm/2400mm/1850mm, Weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Expected to be available starting August, 2026.

CONTROLS   CNC controls KASTO TECHNICAL SPECIFICATION   max. cutting height: 430 mm   sawband length: 6830 mm   sawband width: 1.3 mm   chucking capacity min: 6 mm   clamping diameter max.: 430 mm ELECTRICAL SPECIFICATIONS   total power consumption: 22 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 4750 mm   total height: 2602 mm   total weight approx.: 4500 kg Precision, hydraulic, high-performance, with roller conveyor Ausstattung: Rollenbahn mit Quertransport am Eingang der Anlage und Förderband mit Abschiebetisch am Ausgang der Anlage

A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment.

Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible.

Metal Band Saw manufactured in 2023. This KASTO win A 3.3. features a maximum cutting capacity of 330 mm for round materials and 330 x 350 mm for square profiles. It has a robust design with dimensions of 1300 x 2350 mm and a weight of approximately 2200 kg. If you are looking to get high-quality cutting capabilities, consider the KASTO win A 3.3. machine we have for sale. Contact us for further details.

Hereby 12 pieces of very beautiful, upright Kaspar Schulz storage tanks with a capacity of 6,000 litres each are offered. The tanks have no damage whatsoever and are in mint condition according to their age. Specifications: - Make: Kaspar Schulz (high-quality tanks) - Equipment: with spray head and complete RLV fittings. - Year: 1989 - Capacity: 5.982 Ltr. -Ab. Operating overpressure: 0.9 bar -Ab. Operating temperature: 20 degrees. - Dimensions: Room height in which you stand: 3.80m, diameter: 1.65m If you are interested, please inquire.

cutting diameter: 15 - 560 mm : 560 x 630 mm dimensions of saw-band: 7.400 x 54 x 1,60 mm Control: KASTO material feed - single: 900 mm multiple feeding length: max. 9.999 mm cutting length min.: 6,00 mm sawing motor: 5,50 kW cutting speed: 13 - 127 m/min height of material-table: 700 mm total power requirement: 12,00 kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control, frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m, Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Hacksaw Kasto BSM 403

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

Specifications Tower storage system for sheet metal Manufacturer: KASTO Type: UNITOWER B3.0 Year of construction: 2008 Number of magazines: 49 Pull-out trolley on rail

Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

range L-W-H: 400x300x200 mm saw diameter: 420 mm weight of the machine ca.: 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

Centrifugal fan KASTRUPFabr. No. 27688/1 Year of construction approx. 1985Volume flow approx. 4000 m3/hIntake pipe 250 mmExhaust air connection 400 x 120 mmEngine speed 1440 rpmEngine power 5.5 kWNee connection 380 volts, 50 Hz.- Metal housingSpace requirement L x W x H 1100 x 900 x 1220 mmWeight approx. 150 kgGood condition; used

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 6300 mm cutting range: 420 x 320 mm control: Siemens Simatic HMI cutting speed: 20 - 130 m/min height of material-table: 950 mm total power requirement: 15 kW weight of the machine ca.: 2920 kg dimensions of the machine ca.: 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW

Universum Cone Winding Machine Winding Machine - Manufacturer : J. Kasper GmbH - Type: HWM 50/70 EZ - Winding machine for wrapping croissants, croissants, etc. - 400 volts 50 Hz - YOC: 2015

General SKU409X1228 LocationBarneveld CEcheck MakePonndorf Pressure Working pressure7 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor0.55 KW Specified Features - Peristaltic pump Pumpcheck Number of pumps:1 Capacity700 l/h With motor0,55 kW (400 V, 1390 rpm, (Ex)) With variable speed drive63 - 2420 rpm InletDN15 OutletDN15 Peristaltic pumps MaterialStainless steel 1.4571 (316Ti) General TypePHP 15 GM/FU/EX Mach.No.40200-2015 Year of construction2015 Floorspace0,80 x 0,45 m Total height0,40 m Weight55 kgOils & fatPaints & coatingsFine chemicalsRubberAgrochemicalsPlastic & polymersFeed additivesOrganicsPeristaltic pumpsDetergent & surf.Food additivesDairyDyes & pigmentsPlastic & rubberPonndorf KasselIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Chemical > Fine chemicalsIndustries > Chemical > RubberIndu ...

This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Machine dimensions: 1300/640/H1115 mm -Weight: 344 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Machine dimensions: 1300/640/H1115 mm -Weight: 344 kg

Hacksaw, hacksaw machine, metal hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw, with coolant system and stop -Type: HBS 250/280 -Motor: 0.65/1.0 kW -Cutting speed: 2-stage / 16-32 m/min -Cutting width: 280 x 180 mm -Cutting range at 45 degrees: approximately 180 mm -Cutting area at 45 degrees: square 170 x 200 mm -Saw blade: Length 450 mm - Clamping stock: swivels 45° Machine dimensions: 1300/1100/H1090 mm -Transport dimensions: 1300/600/H1090 mm -Weight: 200 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Quantity: 2 hacksaws available -Price: per piece -Machine dimensions: 1300/640/H1115 mm -Weight: 338 kg

KASTO U 10 / Metal circular saw with material support -CE marking -Year of construction 2012 -Cutting area / Round 90 degrees /100x100mm -Cutting area / Flat 90 degrees / 90x90mm -Cutting area / square 90 degrees / 170x90mm -Mitre cutting device -Coolant device -Vise with counter-clamping device for burr-free cutting -Infinitely adjustable saw feed -2x saw cutting speeds -Dimensions circular saw blade 350x2.5x32mm -Saw motor 1.8 KW Dimensions: LxWxH 1.2x0.8x1.9 meters / Weight 500 kg

5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204

Electric motor, light current motor -Power: 0.37 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Design: B5 -Protection class -Dimensions: 265/143/H143mm -Weight: 9.4 kg