kan used for sale

Kannegiesser belt conveyor belt conveyor GF 1250-680-600 RA1816 Kannegiesser conveyor belt is from 2020 and is in mint (used) condition. The belt conveyor has a motor drive from Bauer with frequency converter to regulate the conveyor speed. The pictured supports are included in the delivery. Technical data: Conveyor length (NL): 1250 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height(BH): 800 - 1130 mm ascending Number of support feet: 2 pieces Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 07/2020 Special feature / accessories: 1x Bauer gear emtor with frequency converter 2x return pulley cover Optionally available: Side guides one and both sides All p ...

Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cove ...

Kannegiesser roller conveyor Vectura RB 800-960-890, not driven RA1301 Technical data: Conveying length (NL): 800 mm Frame width (NB): ca 960 mm Roll width (RL): 890 mm Height/band run (BH): 900 mm +/- 100 mm height adjustment Number of support feet: 2 pieces Drive: without Roller: Ø = 30 mm, grey, plastic (two steel) roller distance (pcs.): 35 mm Pitch: 2° degrees Year of construction: 09/2018 Special feature / accessories: 1x emergency stop switch 1x main switch 2x light barrier 1x end plate 50mm high All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 960 Roll width in mm: 890 Roll division in mm: 35 Driven: NO scope of delivery: including supports For individual, professional advice, simply contact us. Simply contact us by phon ...

Dimensions (L/W/H): 3810x575x1520 mm Weight: 1000 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1820x585x1450 mm Weight: 500 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2650x640x1400 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x780x1500 mm Weight: 800 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1500x1500 mm Weight: 1050 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Continuous fusing press for sale. Working width: 700mm, factory overhauled: April 2012, control: PLC control. Equipped with infeed conveyor, discharge conveyor. Weight: approx. 650kg, overall dimensions X/Y/Z: approx. 3350mm/1250mm/1200mm. Inspection possible by appointment.

Kannegiesser belt conveyor GF 4200-880-800 RA2512 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 4200 mm Belt width (GB): 800 mm Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 4200 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Nord KW: 0,75/S1 Ampere: 0,9 Conveyor speed m / s: -0,95 - 0,95 scope of delivery: without supports and side guides Für eine ind ...

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 17.003-112/3 12 spirals -Dimensions: see photos -Overall dimensions: 1240/340/22 mm -Weight: 6.3 kg

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, tubular heating element -Manufacturer: Kanthal, electric tubular heating element -Type: 6 spirals -Dimensions: see photos -Overall dimensions: 1235/210/22 mm -Weight: 3.3 kg

Condition The machine has been used little and is in a well-maintained, fully functional condition. It is immediately ready for use. Sightseeing and pick-up A viewing and a test run are possible by appointment. Truck access available. Loading by forklift on pallet possible. A forwarding company is located in the immediate vicinity and can be easily commissioned with the collection if necessary. Technical data Suitable for edge thicknesses from 0.4 to 3 mm Edge height: 15 to 55 mm Workpiece height: 10 to 50 mm Minimum workpiece width: 80 mm Minimum workpiece length: 100 mm Feed motor: 1.1 kW Feed speed: 12 m/min Control panel at the machine inlet at eye level Chain feed Support plate for PVC and ABS edging Pressure zone with pneumatically driven main pressure roller and holding pressure rollers Centrally adjustable top pressure Teflon-coated glue ...

machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

technical data: Make: Schorch Type: Kan 60/6 Ma Types No.: 1200111/1 Purpose: general KW: 11 RPM: 960 Diameter V-belt disc: 400 mm diameter, 3 rilly, SBP

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

Pallet niet inbegrepen. Werkend uit bedrijf genomen Auction-ID: A1-49060-179

Auction-ID: A1-49183-5161

Well-maintained car Auction-ID: A1-47414-198

CAUTION: electric motor defective. Auction-ID: A1-47414-135

Kantenanleimmaschine - Edge Gluing Machine Sumbel Perkeo Year 2014 - Serial-No. 40050 Working width max. 60mm Kaltleim / Cold Glue System --wie neu / like new--

3-Kanal PU Saugrad / 3-channel PU suction Wheel Heidelberg Saugrad Neuwertig / as new passend für alle Stahl / Heidelberg Anleger ab einer Arbeitsbreite von 56 cm Suitable for all Stahl / Heidelberg feeders with a working width of 56 cm

Auction-ID: A1-49674-51

Equipped with: Air conditioning, On-board computer, Airbag, Electric windows, Electric mirrors, Start stop system, Parking sensors, Cruise control, Center armrest, Multifunction steering wheel, Mileage NAP Auction-ID: A1-47415-155

Equipped with: tow bar, side door, manual gearbox, air conditioning, heating, multifunction steering wheel Auction-ID: A1-47415-163

Renault Kangoo Rapid Extra Registration date: 01/2012, Technical registration: 06/2026, 202.000 km, 66 kW, Manual gearbox, Diesel, Number of seats: 2 ABS Electr. Side mirrors Electr. Immobilizer Front-wheel drive Particulate filter Power steering Central locking GEARBOX PROBLEM VEHICLE IS READY TO DRIVE BUT THE 2 GEAR JUMPS OUT! Special equipment: Exterior mirrors electr. adjustable and heated, load compartment partition (VARIO), seat front left height-adjustable, seat front right folds down Other features: Storage gallery, driver's side airbag, rev counter, electr. brake force distribution, belt tensioner, Rear wing doors with glazing, Body/body: box, adjustable headrests, Plastic floor in the trunk/cargo compartment, (steering wheel) height-adjustable, engine 1.5 Ltr. - 66 kW dCi Diesel FAP, Radio preparation, wheelbase 2697 mm, smoker package, spare wheel in drivi ...

• VIN: VF1WF000365407930 • Registration number: RZE 8341G • Mileage: 61,000 km • Engine: 1.5 dCi (Diesel) • Power: 70 kW (95 HP) • Engine capacity: 1461 cm³ • Gearbox: Manual, 6-speed • Drive: Front-wheel drive (FWD) • Number of seats: 2 • Gross vehicle weight (GVW): 2,280 kg • Unladen weight: 1,481 kg • Payload: 719 kg • Maximum towing capacity: 12.15 kN • Fuel: Diesel • Emission standard: Euro 6 • Wheelbase: 3,081 mm • Fuel tank capacity: 60 l • Cargo space capacity: up to 4.6 m³ Auction-ID: A7-49744-25