We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
129,384 used machines on RESALE, but how to find them? Machine Search
used
Temperature test Chamber Manufacturer: Noske Kaeser Type: Tea 68 / 40 X Year of construction: 1997 Refrigerant: R404A Refrigerant type: HFC mixture Cooling range: - 40° to 160° C. chemical formula: R32/143a/134a(44%52%/4%) Capacity: 3 kg GWP value: 3922 CO2 equivalent 17.6 tons - co2 equivalent Mains voltage: 400 V Nominal listing of the compressor: 5 kW Outer dimensions: H = 1670 x 910 x = B T = 1535mm Weight: 430 kg All information without guarantee
used
We offer Kaeser compressed air system consisting of 2x adsorption dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter, compressed air management system Sigma, oil-water separation system & control cabinet The compressed air system was used to supply compressed air to a production hall. It was built or extended from 1995-2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the use of the hall. The screw adapter is sold. 1. Screw compressor Kaeser CS 121 75 kW 2, 2x Adsorption Dryer Kaeser DC 75 E Bj. 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Bj 1995 704 kg 4.Piping with ultrafilter SG 0192, 5,Control system: SIGMA Air Manager Basic 6.Oil-water separation system Kaeser 7.Control cabinet standard Rittal PS 4884 Technical data on the components To 1 photo 1-2 Screw compr ...
used
We offer Adsorption dryer 2 Kaeser DC 75 E Bj. 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. The display will continue to be updated specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption Dryer DC 75 with 2 desiccant containers Bj:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption center: Activated aluminum oxide Al2O2g - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: 5700 estimated based on compressor hours - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL entry temperature min/max +2 / +50 °C - Volume flow at 20°C compressed air ...
used
ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar
used
Air consumption: 48 m³/h Motor output: 5,5 kW Overall size: 620 x 980 x 1480 mm Receiver: 215 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Air consumption: 97,2 m³/h Motor output: 9 kW Overall size: 630 x 1220 x 1720 mm Receiver: 270 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Activated carbon filter / activated carbon adsorber KAESER AK64 Serial number 85695 Operating pressure: min. 4 bar - max. 16 bar Operating temperature: min. 4°C - max. 35°C Ambient tremperating: min. 4°C - max. 40°C
used
Oil-water separation system / separator, for compressors KT06 000 01 Replacement filter: XV KT06 AF2
used
Refrigeration dryer Manufacturer: KAESER Type: TE 121 Year of Make: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser.
used
Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge
used
Closing element for check valve, Closing Element KAESER 892268.0 DN300 New ! Dimensions: 490 x 170 x 35 mm
used
The Kaeser ASV60 is a high-quality rotary screw vacuum pump designed for efficient and reliable vacuum generation in industrial applications. Engineered for continuous operation, this unit delivers stable vacuum performance with low energy consumption and minimal maintenance requirements. Built with robust components and advanced screw technology, the ASV60 ensures long service life and dependable operation even in demanding production environments. Key Features: Rotary screw vacuum pump technology Designed for continuous industrial operation High efficiency and energy-saving performance Low noise and vibration levels Reliable and low-maintenance design Integrated control system
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - H P: 970 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - H P: 1000 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 520 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Refrigeration dryer, compressed air dryer with oil-water separator KAESER TB 19 ( TB19 ) Operating pressure: max 15 bar Working pressure HD: max 25 bar Rated voltage: 230 V 1AC 50 Hz Rated current: 3,3,00 65 A ambient temperature: 5 - 43 °C oil - water separator: AQUAMAT 1 Mat.Nr.: 5.2648.00010 without refrigerant ! used, tested ! Dimensions ( refrigerant dryer ): 620 x 540 x 1340 mm Dimensions ( oil-water separator ): 360 x 230 x 530 mm
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 610 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KAESER, KUNKLE VALVE Type 337 - J P: 650 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 920 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Safety Valve, Angle Safety Valves, Pressure Relief Valve KUNKLE VALVE, KAESER Type 337 - J01ANE P: 1020 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
used
Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006
used
Manufacturer: Kaeser, Type: AS 35, Year: 1993, Schraubenkompressor: yes, Operating hours: 44000, Volume flow m³/min: ca.3,0, Antriebsleistung kW 1: 22, Volume flow rate m³/h: 3,3, Year :1993
used
power requirement: 37 + 55 kW Pressure power: 8 bar EXW 92536 Pfreimd - loaded free on truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible.
used
Refrigeration dryer KAESER TAH 6 -used----------- Technical data ----------Maximum pressure: 16 bar, Power supply: 230 Volt
used
Second Hand Kaeser Refrigeration Dryer TI751 75 m3/min Year of construction 2014
used
Second Hand Kaeser CSD105SFC. 55 kW with 12 bar and 8.79 m3/min. Built in 2018 with around 24,000 hours. Frequency-controlled. Compactor stage new in 2021. With WRG.
used
Key data: 18 , 8 , 3
Gyártó: Kaeser ASD 32T csavarkompresszor + hűtőszárító folyamatosan karbantartott! teljes dokumentáció Építési év: 2008 Névleges nyomás: 8 bar Levegőáram: 3,16 m3/min Levegőáram: 189,6 /óra Üzemóra: 87000 Hűtőszárító: ABT60 Sűrített levegő csatlakozása: G 1¼ Feszültség: 400 V/3 PH, 36 A Teljesítmény: 18,5 kW Motor fordulatszáma: 2945/min Környezeti hőmérséklet: 3 / 45°C A gép súlya: 745 A gép méretei: 1770 x 900 x 1530 mm
used
Kaeser SM9 screw compressor Built in 2013 with around 33,000 hours. 5.5 kW with 8 bar and 0.90 m3/min.
used
NEW PRICE: 3,150.00 EURO Technical data: Volume flow ISO 7183 A1: 0.6 m³/min Pressure dew point: 3°C Pressure loss: 0.07 bar Electrical power consumption at 100% vol.: 0.29 kW Electrical power consumption at 50% vol.: 0.17 kW Overpressure: 3 to 16 bar Ambient temperature: +3 to +43°C Max. compressed air inlet temperature: 55°C Dimensions W x D x H: 630 x 484 x 779 mm Weight: 70 kg Compressed air connection: G 3/4 Condensate drain connection: G 1/4 Power supply: 230 V / 1 / 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
We offer a refurbished rotary lobe blower Brand: Kaeser Type: Omega 63 Plus All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
used
feed pressure: 12 bar total power requirement: 22 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 12 bar Number of working hours: ca. 17.402 h total power requirement: 22 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Material No.: 1.2487.0 // Serial No.: 1267-3491416 Operating hours: 26512 h Equipment / Additional information: Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Full load current drive motor: 14 A Electrical diagram: STG-03000 00
used
cooling capacity: 1,25 kW : 6,2 m³/min : 16 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 11 bar : 7,2 m³/min Number of working hours: 33.245 h total power requirement: 37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General SKU298M407 LocationBarneveld MakeKaeser Kompressoren TypeWVC-4000 No.1002 Pressure Pressure buildup0.05 Bar Main Features Capacity61.1 m3/Min Motor11 KW Pressure0.05 Bar Specified Features - Blower Blower(1x) Capacity61,1 m3/min Motor11 KW, 400/690 Volt Inletdia. 200mm Outletdia. 200mm MaterialMild steel Information Year of construction2004 Floorspace1,5x0,55 M Total height0,5 M Weight480 KGBlowersKaeserBlowers > BlowersBrand > Kaeser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
WITH TANK Part No.: 1.7917.3 // Serial No.: 4528 Equipment / Additional information: Refrigerant: R134a Refrigerant charge: 0.28 kg Max. working pressure (refrigeration system): 18 bar Max. working pressure (air system): 16 bar Rated voltage / Phase / Frequency: 230V/1/50Hz Rated current: 2.0 A Ambient temperature: +5°C / +43°C WITH TANK EPC 440-250 Part No.: 1.5938.4 // S. No.: 1236 // Age: 2006
used
Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar
maximum number of results exceeded
please refine your search