kaeser compressor used for sale

Just arrived, tested and ready for sale: high-quality package of BOGE compressors and dryers in very good condition and few hours.

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts! Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

Just arrived, checked and ready for sale. Nice Package of used BOGE air compressors and dryers in excellent condition and low working hours.

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...

Screw air compressor Ceccato CSB 30/10 MAX 10 BAR | ChillerTech - Compressed air compressors! Made just for you! The Ceccato CSB 30/10 screw compressor is the perfect solution to operate machine parts efficiently and maintain a pressure of 10 BAR. Its durable and user-safe design makes it the perfect compressed air solution. In addition, thanks to its readily available spare parts, the Ceccato CSB 30/10 is simple, fast and cheap to use, which means that you can reap many benefits from it, not only the short-term ones. The Ceccato CSB 30/10 MAX 10 BAR compressor is also very quiet (low noise version), which makes it user-friendly even when fully loaded. Armecell's sound insulation helps to silence compressor parts and ensure long-term operation, even in very harsh conditions. This is a guarantee of satisfaction and safety! Basic information: Manufacturer: Ceccato Model: CSB 30/ ...

Used in very good condition with flanged electric motor 165KW/225HP @ 3000rpm Y400V/50hz, with coupling Cooling agent: R134A can be used for R717 Amonia 2 sets available

Compressed air screw compressor oel-free Atlas Copco ZT 90 VSD FF 90 kW, 8.75 bar, 15.50 m3/min Comment: oel-free, air-cooled, frequency-controlled. Delivery volume 4.7 - 15.5 m3/min. With integrated MD dryer.

Rotary screw air compressor Atlas Copco ZT 90 VSD FF oilfree 90 kW, 8,75 bar, 15,50 m3/min Oil-free, air cooled. Variable speed drive. Volume flow 4,7 – 15,5 m3/min. With built-in MD adsorption dryer.

Compressed air screw compressor oel-free Atlas Copco ZR 145 FF 145 kW, 7.5 bar, 23.20 m3/min

Rotary screw air compressor oil free Atlas Copco ZR 145 FF 145 kW, 7,5 bar, 23,20 m3/min

Air Screw Compressor Atlas Copco GA 132 VSD 132 kW, 8.5 bar, 27.40 m3/min

Rotary screw air compressor Atlas Copco GA 132 VSD 132 kW, 8,5 bar, 27,40 m3/min

Air screw compressor Atlas Copco ZR 500 VSD 500 kW, 8.6 bar, 79 m3/min Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.0 m3/min.

Compressor/Atlas-Copco/mobile Type XAHS 186 DD Year of construction 2008 In the case of the 1881 h Motor 104 KW Weight 1975 kg ABE K 582 Green license plate Location Lower Saxony, currently in the service workshop I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are gross and negotiable! The included VAT will be shown on the invoice. Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Rotary screw air compressor 160kW, 8.6 bar, 25 m3/min.

Rotary screw air compressor ZR 500, 525kW, 7.5 bar, 83.20 m3/min,

355 kW, 50.60 m3/min, 10 bar, oil-free, water cooled. HP 1 x replaced element.

SOLLANT SLT 15 rotary screw compressor built in China in 2021 is a versatile device designed to deliver the highest quality compressed air. The compressor’s special modular design features a small number of parts and connectors, ensuring efficient and uninterrupted operation even during the most demanding industrial applications. The SOLLANT SLT 15 rotary screw compressor also features an integrated SOLLANT LGA-2.6 refrigeration dryer, which continuously removes moisture and water vapour from the compressed air, minimising the risk of corrosion. All key operating parameters are continuously monitored by a MAM-880 controller with electronic display and sensors. The total weight of the machine is 550 kg. Technical specifications of the SOLLANT SLT 15 compressor - power: 15 kW - maximum operating pressure: 1 MPa (10 bar) - capacity: 2.1 m3/min - drive type: direct drive - refri ...

Rotary vane compressor - running dry Manufacturer: Becker Type: KDT 3.140 motor: 400V 7.5 KW/50Hz suction power: 140m3/h Compression pressure: 2500 mbar (abs.) 1500 (overprint) Status: Generalueberholt and repainted Procurement: 12 months Zubehoer: - User manual We are happy to answer any questions you may have. ready for use

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Immediately available used compressor

Bitzer Screw Compressor NEW Type HSK 7471-90-40P Stroke volume 250cbm/h 90 hp electrical power. New

Bitzer compressor type 4H-15.2Y, 73m. Lifting volume. Have 5 pcs of it.

Bitzer Compressor Type 4G-20.2Y

Maximum volume flow: 390 l Capacity approx.: 266 l Maximum pressure: 10 bar Tank: 50 l Cylinder/level: 2/1 Dasr7h9qg Speed: 1,360 min-1 Engine power: 2,2 kW 230 v weight: 57.5 kg Year 2011 Dimensions (Lxwxh) in mm: 870 x 400 x 700 G &-2974-O2386

Compressor black RS 1015 type Rota Nova NK 60 5.5-11 kW / 7.5-15 HP 1.5 m3 / min Ssszy0 L x W x H: 110 x 80 x 100 cm Weight 450 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

10.25 bar, water cooled, with built-in at compressed air refrigerant dryer, variable speed drive.

Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465

power:30kW volume flow:4,68m3/min pressure:9,7bar with inverter, heat exchanger

Screw compressor - see pictures

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

We suggest Bitzer compressor. All compressor is working: Bitzer 4J-13,2Y 1pcs. 750Eur Bitzer 4TCS 12.2Y- 1pcs 550Eur Bitzer 4P-10.2Y- 3pcs 450Eur/pcs Bitzer 4V-6,2Y 3pcs. 320Eur/pcs Bitzer 4DES-7Y 2pcs 450Eur/pcs Bitzer 4DC-5,2Y 1pcs 450Eur

Screw compressor 4 m3/min - see pictures

Manufacturer: APD Type: HC-8C Number: 7 stueck; ready for use

Manufacturer: Trane Type: CRHR400 G2HBO Type: Compressor Technical data: Volume flow 145.3 m3/h compressor end pressure 28 bar speed 145 0 1/9p Voltage: 380/415 V 3PH 100/92 A 50 Hz New price EUR 11,043 Condition: new; ready for use

Mannesmann Demag compressor General repair 2004 Flow rate: 39.5 M ³/min, 2150 m ³/h Suction pressure: 1 bar Max pressure: 10 bar Speed: 1500 rpm Engine power: 250kW Pressure: 8.5 bar

maximum operating pressure: 10 bar effective delivery quantity at about 7.5 bar: 450 l / min required drive: 1450 rpm, 4 kW Drive motor: 380/660 V, 1440 rpm, 5.5 Tank capacity: 250 l Space: 1500 x 600 x 1320 mm Approximate weight: 250 kg

Manufacturer: Refcomp Type: SRC M 340 Performance: 406 m3/h; good

Renner RS-TOP Screw-compressor 15.0; 15 kW; Delivery at 10 bar: 1.96 m ³/min-1960 l/min; Outlet: G3/4 "; Sound level 70 dB (A), year 2013, 13,157 h., year 2009

3 compressors and a refrigerant dryer, Boge, S40 and S50, DS180 – second-hand - : Prices ex location (net): S40 /Year 1999: 1.950.-€ S40 /Year 2004: 2.450.-€ S50 /BJ 2004: 2.650.-€ DS180: Boge Compressed Air Systems offers three compressed air screw compressors and a cold drying system: Manufacturer: Boge Type: S 40 Machine No:30888 Year of construction:1999 Hours: 14,600 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 40 Machine No:46920 Year of construction: 2004 Hours: 28,400 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 50 Machine no: 30574 Year of construction:1999 Hours: 37,200 Pressure: 10bar Volume flow at 10bar: 5.40 m3/min Drive motor:37kW --- Refrigerant dryer Manufacturer: Boge Type: DS180 Machine No:398348580002 Flow ...

Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation

Compressor Worthington in very good condition, incl. dryer Description in the annex!

Key data: 75 , 10 , 11

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

Piston compressor SCHNEIDER type UniMaster UNM 580-15-90 DX Serial number: 10022047 Retail number: A715101 Year of construction 2014 Intake flow rate 580 litres/min. Filling capacity 470 litres/min. Pressure capacity 15 bar Boiler capacity 90 liters Sound level 95 dB(A) Motor power 4 kW Mains connection 400 Volt, 50 Hz (with 16 Amp. Plug) - 2 cylinders in row arrangement oil-lubricated - Compressed air unit with pressure reducer and fog lubricator - 1 piece of air connections with quick-change coupling via fog lubricator - 1 piece of air connections with quick-change coupling without lubricator - Condensate drain via ball valve - Pressure switch set to 15 bar- Running time from 0 bar to 10 bar cut-off pressure = 1 min, 50 sec. - Running time from 0 bar to 15 bar cut-off pressure = 2 min, 50 sec. - mobile, space requirement: L x W x H, 1100 x 500 x 1000 mm , weight: 116 kg , good conditio ...

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 722 x 1555 x 1080 Weight: 424 kg Compressed air connection: 1

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 1072 x 1555 x 1080 Weight: 524 kg Compressed air connection: 1

M. No.: C0851000161 Equipment / Additional information: Ultimate pressure: 150 hPa(mbar)

Pressure: 10 bar Motor: 11 kW Free air delivery: 1,76 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 505 kg Compressed air connection: 1

Pressure: 10 bar Motor: 22 kW Free air delivery: 3,21 m³/min Measurement (WxHxD): 1072 x 1735 x 1056 Weight: 561 kg Compressed air connection: 1

Pressure: 13 bar Motor: 18,5 kW Free air delivery: 2,32 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1