kaeser 83 pv used for sale

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-44886-14

Power: 15 kW (20 hp) Operating parameters: Working pressure 11 bar; FAD: 2.20 m³/min @8 bar; 1.86 m³/min @11 bar; 1.40 m³/min @15 bar; noise ~65 dB(A); operating hours 39,454 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; D service applied; suitable for workshop and industrial air systems 15 kW rotary screw compressor with variable FAD depending on pressure and low noise level. Auction-ID: A7-44886-3

package air compressor 5.5/8 bar max, S/No 100259-0-00-04 (2014), Please note this is installed on the upper floor, ANR 1604 Auction-ID: A1-45187-44

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 01864 10 Built in 1993 max. pressure 13 bar Power consumption 11 kW Delivery volume 1,150 l/min Operating hours 34,957 B/h Defective contactor replaced Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y2-1

Mobile portable compressor Kaeser M43 from 2010 with approx. 9,078 operating hours. Robust and compact design on chassis with ball coupling. Ideal for construction sites, pneumatic tools and sandblasting. The machine is equipped with a reliable diesel engine and offers an operating pressure of up to 7 bar. Maintenance-friendly design with good accessibility of the components. Typical Kaeser quality, versatile in the construction and industrial sectors. Auction-ID: 04J-7CB-1

Refrigeration Dryer Kaeser TC 36 Air flow rate 3,900 l/min Manufacturer: Kaeser Machine number 1890 Type TC 36 Year of manufacture 2007 max. pressure 16 bar Power consumption 1.4 kW Delivery throughput 3,900 l/min Refrigerant R 134 a with level-controlled steam trap Test run carried out lxhxw 78x66x101 cm Weight 170 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y4-1

Refrigeration dryer Kaeser TE 91 Air flow rate 10,150 l/min Manufacturer: Kaeser Machine number 2349 Type TE 91 Year of construction 2008 max. pressure 16 bar Power consumption 1.15 kW Flow rate 10,150 l/min Refrigerant R 134 a with level-controlled steam trap Test run carried out lxhxw 152x106x152 cm Weight 570 kg Loading costs 75,00 Euro Auction-ID: 04J-7Y5-1

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 2233 Year of construction 2002 max. pressure 7.5 bar Power consumption 11 kW Delivery volume 1,855 l/min Operating hours 64,145 B/h Load hours 48,778 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7XZ-1

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 1017 Built in 1999 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,590 l/min Operating hours 40,914 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y0-1

Operating pressure: 7.5 bar Size: approx. 2400 × 1250 × 1450 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-739

Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Euro-Pool Grid Box 800 x 1200 mm New goods, see pictures. External dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Capacity 1500 kg Weight 70 kg Weight 70 kg Load 6,000 kg Colour grey Stack height nested 20 Stack height unnested 5 according to UIC standard 435/3 The front side is foldable. One half is open from above the other half is open from below (see pictures). Price: € 109.00 net per piece from stock Larger quantities on request Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure co ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Dr ...

Linear guide rails, roller rail CS REXROTH R180635331 512175403 2 pcs Length: 836 mm New ! Dimensions: 850 x 80 x 40 mm

PC control cabinet, computer cabinet RITTAL PC 8368 000 ( PC8368000 ) without contents and cooling unit ! cooling unit is article S482 ! used, tested ! Dimensions: 600 x 836 x 1600 mm

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 9 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 835 mm / 1x 400/170/100/50/40/30/20/15/10 mm each -Total weight: 11 kg

Radiator, Radiator, Heat Exchanger PAGUS 830 x 145 x 840 mm mains dimension: 820 x 755 Connection thread: 1 1/2 inch New ! Dimensions: 830 x 145 x 1020 mm

Ball screw WARNER ELECTRIC DANA Boehringer F441605101305700 830 mm 005.1117.1143.10 28714 New ! Dimensions: 830 x 80 x 90 mm

Jigsaw, high-frequency tool, high-frequency machines FINE ASt 836 0.36 KW 1640 rpm 200 V 300 Hz untested ! Dimensions: 330 x 170 x 70 mm

Drilling Machine, High Frequency Tool, High Frequency Machines FINE ASg 836 0.36 KW 420 rpm 200 V 300 Hz used ! Dimensions: 290 x 200 x 70 mm

Viewing by appointment! Auction-ID: A1-40243-141

Allestimento: Heating/Cooling,Stato: used,Volume / Litri : 8.310,Tipologia: cubic,Piedi : feet,Heating/cooling (filter bar): present,Altezza Totale: 2.400,Larghezza Totale/mm: 1.400,Lunghezza Totale/mm: 3.100,targa identificativa: No,Accessori : Outlet tap,Osservazioni: Cooling by internal cooling plate Manhole in the front floor available Container photos may show similar and not the exact container ,ultimo settore dutilizzo: Wine,Materiale a contatto con il prodotto: V2A 1.4301 (AISI304),Piletta di fondo : No, Frangiflutti: No, Piletta di fondo :

Tank Capacity: 80MT Tank Dimension: 3,830 For any inquiries, please contact: 1. email: yytantopglove.com.my 2. Contact Number: i. Mr Aaron: 017-3698203

BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete), Price fully refurbished: Ask for Quote

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8,690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-26

Machine used for creating decorative or functional creases on the shoe upper. Auction-ID: A7-45167-20

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/s9ofFnvYyi4 - Former Linde full-service device - Service valid until 12/2026 - UVV valid until 12/2026 - Battery: , very good performance measured with V Auction-ID: A1-45449-158

Battery from former Linde Service, measured with very good performance 50.1V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1139

Battery from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1024

Equipped with GPS, chassis number: AGCC8333HQU001001, hour reading: 12806, suction arm with super load, 7T Vario, with 5900 complete engine replaced, camera, radio, without injector, Engine: AGCO SISUPOWER diesel, Cylinder capacity: 8.4 litre, 6-cylinder, 360hp, rear linkage, 3-point linkage. Auction-ID: A1-40133-12

Suspended front axle, pick-up tow bar, top link, air brakes, hydraulic car brake valve, fender control, 4-point cab suspension, 50km/h, air conditioning, GPS, track width 2050mm, load sensing, 540e/1000/1000e pto rpm Auction-ID: A1-40133-4

Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43751-96

Unused, on and including pallet(120x98cm), total height 87cm. Auction-ID: A1-45188-84

Auction-ID: A1-45411-54

We offer a refurbished Dokadek - 412.83m² with 65% discount - partially refurbished Doka rental warehouse quality The frames are cleaned, corrosion sealed and coated with zinc phosphate All elements are covered with original Doka Xlife formlining and partly newly covered New value approx. 274,093.90€ Special net price: 95.932,87€ pcs. Description 17 Dokadek element 1.22 x 2.44m 164 Dokadek element 0.81 x 2.44m 23 Dokadek element 1.22 x 1.22m 4 Dokadek element 0.81 x 1.22m 250 Dokadek support head 42 Dokadek 2.44m 21mm 2 Dokadek balancing beams 1.22m 21mm 46 Dokadek Differential Carrier 0.81m 21mm 149 Dokadek suspension bracket H20 30 Dokadek Wall Brackets 100 Dokadek Wall Head 10 Dokadek Corner Head 2 Dokadek mounting rod B 28 Dokadek panel pallet 0.81 x 2.44m 5 Dokadek panel pallet 1.22 x 2.44m 7 Doka reusable containers 1.20x0.80m 2 Dokadek range of c ...

ES4019, M75, 1999, 20 - 80 kg/h,

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

GP113 - used approx. 15.8 m³ / 15,800 litres PVC-GF tank, aboveground, vertical, flat bottom, in good condition. volume: approx. 15.8 m³ / 15,800 litres material: PVC-GF tank diameter: Ø approx. 2.30 m height: 4.30 m Vertically standing PVC-GF-tank, aboveground storage tank, round shape, flat bottom, access on the tank body, multiple in- and outlets on the rooftop. Tank as shown on the pictures. For media with a specific weight of up to 1.42 kg / L. The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank and more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank  ...

KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...

UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...

GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC  ...

The system has been modernized several times by Cemecon, most recently in 2023 to the latest software version Last service 2023 of Cemecon Pure research plant: number of batches approx. 1600 processes The facility is equipped as follows: Six cathodes All DC cathodes, two of them also HIPIMS BIAS: DC, MF, HIPIMS Booster Anodes 3 x heaters Interface for precise tapping of the Peak –I, -U + -P in HIPIMS mode via BNC (with oscilloscope) 2 turbopumps 4 gases, 1 of which is flammable Table of 6 The following accessories can be taken over with the system: water/water heat exchanger, second 6-seater table with base and "pallet truck", 2-person gas cylinder cabinet, spare sheet set, spare heaters, charging material, many targets (all German manufacturers, no China imports) and a variety of accessories and spare parts.

Planetary tube saw: Ø110.

Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.

Vane pump, PV7-17/10-14RE01MC0-16, R900580381FD, Original! Rexroth, new Attention:: This is an original Rexroth product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Max. 160 bar, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

PVPP filter, Fabr. Schenk, type: HK 6 STR, for 25 hl/h, with 34 horizontal screens, 340 lt. boiler capacity, 5 bar, completely in stainless steel