k und g used for sale

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist 1.5 ton -Load capacity: 1 1/2 ton -Chain Length: 3m -Quantity: 1 piece -Price per piece -Transport dimensions: 660/300/H150 mm -Weight: 19 kg/pc.

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Proximity switch, proximity sensor, proximity sensor -Manufacturer: Keyence, proximity switch proximity sensor unused original packaging -Type: EM-030P -Number: 2x encoder available -Price per piece -Dimensions packaging: 110/105/H25 mm -Weight: 0.1 kg/pcs

1 Karlsruhe cooling tower system with 2 fans Type: KD 2/12 - 34-3 Fabr. No. 7522, power 2,232 KV with complete frame with complete rust removal Shut down End3e 2023, completely on site on the production roof,

Krones VOC can filler with 84 valves, can 211/202, Ferrum F708 seamer 8 heads. Krones Can Filler VOC with 84valves, can type 211/202, with Ferrum Can Seamer with 8 heads.

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)

Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock

1 cooling tower system, manufacturer Karlsruhe with 1 fan, type KD2/18-34-3 Engine BG 180C 220 kW with 1,460 rpm Brik No. 8222, power 1200 kW stands on the roof, not dismantled with steel frame and stand frame rust removal Withdrawn from production at the end of 2023

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg

Auxiliary switch, circuit breaker, circuit breaker, switch disconnector, switch disconnector, circuit breaker, circuit breaker, auxiliary switch, main switch -Manufacturer: Kraus & Naimer, main switch disconnector -Type: B T103/01 -Dimensions: 65/65/H105 mm -Weight: 0.2 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Rexroth, 3-phase permanent magnet motor -Type: MKD041B-144-KPO-KN -Speed: 7500 rpm -Shaft: Ø 14 x 30 mm -Dimensions: 275/83/H112 mm -Weight: 4.6 kg

used weigher Kemper Consul-ET, in bakery condition, checked and tested, works perfectly, No. 680454, 16 A, 400 V, 50 Hz

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Manufacturer: Doleschal Type: Smoking chamber Model: dvoja kolica Productivity: 260 kg/h Height: 3000 mm Width: 1910 mm Length: 2290 mm Voltage: 400V 50Hz 3N Power: 48 kW Main material: Stainlees Steel

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition

Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!

1m x 1m 24 floors 2m high 36 stainless steel gratings with perforated plate 480 x 995 mm

Tool carrier, tool holder for milling holders, spindle head holder, modular tool pocket, tool holder set, assembly trolley, CNC transport trolley -Manufacturer: Chalice, TUL tool carrier tool holder 182 pieces -Type: SK50 -Price/tax: complete -Transport dimensions: 1200/800/H1170 mm -Weight: 221kg

quantity: 2 STK Dr. Kaiser Diamant Abrichtscheibe Modul 1,5 - EW 15° - HBR=1000 - ID-Nr. 69667_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data ...

quantity: 1 STK Diamant Abrichtscheibe Modul 2.75 - EW 17.5° - HBR=2500 - ID-Nr. 85551020_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for  ...

Koenig and Bauer Alphajet Into Inkjet printer MID060 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

Infeed Belt, Integrated Pre-Stacker, Integrated Control Panel, Security Guards, Delivery Belt, Max Untrimmed Size: 12.20" x 15.74" x 3.14", Max Trimmed Size: 11.80" x 15.27" x 3.14", Min Trimmed Size: 3.90" x 4.72" x 0.78", Max Thickness: 3.15", Max. Stacking Height: 3.14", Front Cutt-Off Width: 1.57", Head And Tail Cutt Off Width: 1.96", Capacity: 6.600 Cycles/Hour

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

Cold room lock, cold room lock, mortise snail lock, cold room door lock -Manufacturer: STUV, cold storage lock unused Ovp -Type: 3.16.416.1 KRT Lock V2A -Number: 5x door lock available -Price: per piece -Carton dimensions: 260/150/H40 mm -Weight: 1.1 kg/piece

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Control Heidenhain ... Manual Plus 4110 Turning diameter ... 500mm Turning length ... 1500mm Spindle bore... 82mm Spindle speed ... 0-3000 rpm. Machine weight ... 2500kg L x W x H ... 3092 x 1370 x 1785mm Main engine power ... 17kW Max. workpiece weight ... 1000kg Circumferential diameter via support ... 350mm The machine is in good condition, possible to test under power.

Make: ebmPAPST Diameter: 710mm Speed: 1750 rpm Power: 5030W 4 pcs. available Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

surface area: 1200 x 600 ( x 500 ) mm no. of flutes: 9 groove width: 14 / x 62,5 mm total power requirement: 0 kW weight of the machine ca.: ? t Packing: Holzkiste 1400850700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. saw blade diameter: 350 mm Manual material tensioner Minimum quantity spraying Digital angle display

Hydr. Welding Rotary and Tilting Table - Four Axis - Welding Manipulator Specifications: - Max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. table height in horizontal position approx. 1070 mm - Face plate mot .rotatable + swivel or tiltable - Face plate horizontal + vertically movable, travel distance 1250 mm - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Handheld remote control for speed regulation - E. footswitch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg

- Flat pile feeder FD 66-T - Tremat - Digital Control - 6 folding pockets - 2 knifes - mobile stream delivery

used head machine Kemper Quadro Round, in bakery condition, cleaned, run to the end, 5 rows, No. 660052, 25 A, 50 Hz, 400 V, sale as seen

Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...

used roll line Kemper Quadro 5-row, overhauled, with head machine (245 cm long), double sprinkling (330 cm long) and setting table (300 cm long), width of the line: 125 cm, head machine: No. 93228, item no. 650010, 16 A, 400 V, 500 Hz

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...

Kallfass banding machine with shrink tunnel particularly suitable for long parts (wood, parquet, etc.) Trays or newspapers in a stack. Built in 1999 Punch width 950mm Max. film width 820mm Film (flat shrink film): up to 120 μm Film roll outer diameter: max. 400 mm Film roll width: top 650 mm, bottom 620 mm Passage width: 950 mm Passage height, adjustable: 400 mm In-line conveyor belt: length 2000 mm, Goods conveyor belt in the outfeed: length 2000 mm Welding system: in profile form, permanently heated, temperature thermostatically controlled, Specially coated, maintenance-free, completely odourless: Pneumatically operated welding punch with safety brake cylinders: Film tear and separation control: Foil pre-dispensing at the bottom for extremely light products Foil rolls at the top and bottom for laying with motorised drive Welding punch protection to protect the produ ...

Round stack feeder 4 pockets Press delivery