k und g used for sale

Lifting drive shaft for Pressant 2 column palletizer as good as new Dimensions see pictures Krones Material No.: 2950539080

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m -Quantity: 1 piece -Price: per piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Kromschröder, gas pressure switch orig -Type: DG50UG-6K2 84447379 -Control range: 2.5 - 50 mbar -Pmax.: 500 mbar -Dimensions cardboard: 120/100/H85 mm -Weight: 0.4 kg

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Kromschröder, gas pressure switch orig -Type: DG500U-6T2 84447564 -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions cardboard: 120/100/H85 mm -Weight: 0.4 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, liquid receiver -Manufacturer: Klimal, liquid collector -Type: FM 0.88 (M16/M06) -Pressure: up to 28 bar -Contents: 0.88 liters -Dimensions: Ø 80 x 257 mm -Weight: 0.7 kg

Dumpling Cutting Machine with container Machine mobile Connection 400V, 16A-CEE plug Machine Other bakery machines in stock

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter dryer, receiver dryer -Manufacturer: KMP Kenmore, Receiver Dryer -Type: KHP 64/130/S-8X8MM-DF -Dimensions: Ø 65 x 167 mm -Weight: 0.6 kg

Universal Kemper Model: Orion 60 Blender with stainless steel kettle Bowl capacity approx. 60 litres with tilt function 180 ° Capacity approx. 10 to 180 litres/hour Connection 400V, 6.5 kW, 16A-CEE plug Machine Many more bakery machines in stock!

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter drier, receiver dryer, filter drier -Manufacturer: KMP, Filter Drier -Type: MB 20 B6 5/8 FLF -Dimensions: Ø 42 x 210 mm -Weight: 0.4 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -Design: B3/B5 -Protection class: IP 44 Quantity: 1 piece available -Dimensions: 480/285/H335 mm -Weight: 69 kg

Year of Make: 1997 KRONES BLOC for rinsing, filling and capping glass and PET bottles. Rinser: 20 grippers Filler: 20 valves (pitch 222 mm) Capacity: 6000 bph Capper: 5 heads. (PE threaded closure) . Possible bottle formats from 0.33 to 5 L. The system is now mechanically completely overhauled, the new control system is missing. OPTION: If desired, we can equip the machine with a new control system before delivery and adapt it to customer requirements.

Type: Promeco 2000 ETK Year of Make: 2004 Electr. Connection: 1AC/N/230V 50-60Hz/ 3.0A The Innocheck Promecon 2000 testing system is equipped with a PC base system, camera, illumination panel and monitor.

Toggle plug, anchor hook -Manufacturer: Würth, Toggle dowels 25 pieces/box -Type: W-KDW M10x180 -Number: 27 boxes available -Price: per box -Dimensions cardboard: 270/210/H100 mm -Weight: 3kg/carton

Year of Make: 1989 Overhaul: 2020 Capacity: up to 12,000 bph 0.5l Counter-pressure filler for beer with long pipe Product: Beer, soft drinks and mineral water Bottle: Glass, 0.33; 0,5; 0,75; 1.0 L Capper: Crown cork

On request

Incl. control and control panel Axles: 6 Hand load capacity 16 kg

Toggle dowels, anchor hooks -Manufacturer: Würth, tilt dowel -Type: W-KDW M10 x 180 -Condition: according to pictures without tilting plate -Quantity: 11 pieces available -Price: per piece/minimum order 5 pieces -Weight: 0.1 kg/pc.

Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch -Manufacturer: KDG Mobrey, magnetic float switch ovp -Type: S179DB/F83 -Number: 5x float switches available -Price per piece -Dimensions: 405/120/H110 mm -Weight: 2.9 kg/pc.

Key data: 450 mm, 300 mm, 270 mm

Manufacturer: Kira Type: PC-30 EA Condition: very good Year of Make: 2008 X-axis: (mm) 450 Y-axis: (mm) 300 Z-axis: (mm) 270 Spindle speed max.: (rpm) 10,000 Max. thread slitting: (rpm) 5,000

3 models available i.e. 15 Pieces Power: 50 - 100 - 160 KVA Type AoCk

Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.

electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA3280M-BB051-Z -Power: 90 kW -Speed: 1475 rpm -Shaft: Ø 75 x 140 mm -Design: B5 -Protection class: IP 54 -Dimensions: 1050/700/H550 mm -Weight: 692 kg

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, mobile shelves, mobile open-fronted storage bins -Storage bin rack: Mobile storage bin rack, double-sided -Storage capacity: 72 storage bins -Dimensions: 690/500/H895 mm -Weight: 24 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 700 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/213/H230 mm -Weight: 29 kg

Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT 380.RM -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg

Pressure filler Krones / Germany Type Mecafill VK2V 24/6KK/6SV Filler 24 filling stations + crown corker KK6 + capper SV6 Short tube Max. approx. 8,000 containers / h Container 0.33 + 0.50 liter glass bottle Year of construction 1995 - PROJECT: FILM AVAILABLE - PLEASE REQUEST Further documents and price on request

Make: KOMFOVENT Type: KLASIK-RECU-9-IS3-C-18.5/15.0-F7/M5-X-X-CW Year of Make: 2014 Capacity: 25,300 m³/h Current consumption: 63.8 A very good condition, as good as new facility Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Inv. Num. : 7721 Type: COMPACT Producer: VANAD Created: 2015 Parameters: Operating hours: 5000 h Work table length: 4000 mm Work table width: 1500 mm Machine weight: 6000 kg Equipment: Eagle Compressor

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Jungheinrich, tiller head / tiller complete from pedestrian stacker type EJE-KmS -Number: 2x drawbar available -Price per piece -Dimensions: 1050/510/H220 mm -Weight: 20 kg/pc.

grinding diameter: 450 mm grinding length: 1500 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct  ...

Roller shutter insertion milling device TYPE RFG ------------------------------------- Manufacturer description: with mounted hand router efficient milling of the roller shutter insertion on the roller shutter guide strips with cutter 1800 watts 18,000 rpm. ------------------------------------- (Technical information according to the manufacturer - no guarantee! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This machine is a mixer, cutter and emulsifier enclosed in one housing The benefits are as follows - space-saving thanks to compact design, - grinding the product in the cutting bowl under the influence of vacuum with simultaneous stirring and cooking - stable end product with repeatable quality thanks to fully automatic process control, - possibility of direct and indirect heating and cooling, - the possibility of producing fine emulsions and paste-like masses, as well as products with fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Main Material: Stainless Steel Agitator tank: 2000 l

Koening KTW 653 Printing Plate Developing Machine; Condition as good as new; 3 brushes; Inlet width 650mm; suitable for waterless plates; optionally with pressure plate stacker. Plate processor Koenings KTW 653; condition like new; 3 brushes; working width 650mm; used for waterless plates; for option with plate stacker.

Fan filter, fan line, air cooler, control cabinet fan, fan -Manufacturer: Sheng Kwei, fan fan -Engine: Type SK205AP-11-1 -Dimensions: 205/80/H205 mm -Weight: 2,6 kg

Operating lever, cross lever, cross switch, cross toggle switch lever -Control lever: Cross toggle switch -Type: KSK 22/6 021652 -Voltage: up to 250V 10A -Dimension: Ø 81 x 137 mm -Weight: 0.3 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: TER Tecno Elettrica Ravasi, Crane remote control with cable / Portable control panel for crane -Cable length: 25 m -Dimensions: 700/560/H380 mm -Weight: 18 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

Grinding wheel, surface grinder, grinding belt, wide belt -Manufacturer: VSM, Wide belt sanding strip 1350 x 2620 mm 2 pieces -Type: SMA Form E13 Series KP510E -Grain size: 180 -Price/Fee: complete -Carton dimensions: 1480/260/H330 mm -Weight: 5.3 kg

Drive shaft, cardan shaft, universal joint shaft, articulated arm -Manufacturer: KUKA, articulated arm from robot KR125/3 KR125L90/3 -Item No.: 00 103 782 -Shaft: Ø 42 mm -Number: 6x articulated arms available -Price: per piece -Dimensions: Ø 42 x 660 mm -Weight: 1.6 kg/pc.

B&A REF: 9053 TON: 80 SHOT WEIGHT: 183 SCREW DIAMETER: 40MM STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 8.12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

PTO shaft, cardan shaft, cardan shaft, universal joint shaft, articulated arm -Manufacturer: KUKA, articulated arm from robot KR125/3 KR125L90/3 -Item no.: 71 040 098 -Shaft: Ø 37 mm -Number: 3x articulated arm available -Price per piece -Dimensions.: Ø 37 x 650 mm -Weight: 1.3 kg/pc.

WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

AUTOMATIC MULTI RIP SAW model KUANG YUNG MRS 350 - TAIWAN cast iron machine structure CE regulation: YES with instruction booklet and CE declaration of conformity electric lifting pressure unit automatic lubrication of the carpet Technical details : max.height of cut mm.135 max.working width mm.350 minimum length of cut mm.650 max.diameter of blades mm.405 min.diameter of blades mm.300 arbor sleeve mm.70 main motor power Hp 50 feed motor power Hp 2 motor power lifting pressure group Hp 1 arbor speed rpm 3000 variable carpet advancement speed. from 7.3 to 30 m/min. net weight kgs.2400 volt. 380/50

WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

Fully automatic high-performance die-cutter Renz Kugler 341-2R for calendars and ring binders Technical data – Working width: 500 mm – Format area die-cut side: max. 500 mm – Format area unpunched side: max. 500 mm – Punching thickness: max. 3 mm per layer – Punching speed: 110 cycles – Paper feeding: automatic with non-stop paternoster feeder – Paper delivery: automatic in box delivery with vibrator – Paper grammage: min. 60 gr./m², max. 2 mm (restrictions due to paper grammage/quality are possible) – Register punching: yes (not included) – Interchangeable tools – Tool change requires only a few steps – fast format change thanks to manual adjustment wheels – adjustable edge spacing – Switchable punches – Space requirement: 3.30 x 1.50 m – Net weight 1580 kg

Weight: . kg Year: . content: Rubintastkopf cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 62 mm -Intake: MK4 -Dimensions: 740/76/107 mm -Weight: 5.4 kg

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 70mm -Intake: MK5 -Dimensions: 825/65/70 mm -Weight: 18 kg