129,522 used machines on RESALE, but how to find them? Machine Search
used
5 swivel manifolds 8-fold, electric, 160 t/h Tel. 01715213204
Product number: 2828 Type: BMB600 Serial number: 11 Belt width: 400 mm Power: 3 x 380V, 50Hz, 1.01kW Dimensions: 2050 x 1200 x 1950 mm Weight: 240 kg Rolling machine for ragout balls (bitterballen)
Seydelmann K40 Bowl cutter 2008, Stainless bowl cutter, three blade assembly, variable speed, timer and temperature controls, 3Ph
chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300
Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500
Used stainless steel Z mixer / kneader. Mixer after complete service, all operating components have been replaced.
number of controlled axis: 6 workpiece weight: 210 kg throat: 2697 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 8 mm, 1
Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...
Coma Freezer Cell Freezer Cell Freezer Room Internal dimensions: 210cm wide 285cm Depth 203cm high Dimensions: 250cm wide 340cm deep 283cm tall
Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T
Robot KUKA KR 45/2 only mechanics ZH30/45-II Number of axles: 6 Max. load capacity: 30/45 kg Max. working range: approx. 2033 mm Year of construction: 1999 Scope of delivery: robot mechanics and connection cable 2 weeks start-up warranty. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited.
Brezel-Verlängerung, funktionstüchtig
Since we don't use this device enough, we sell this super forklift with Volvo engine!
spindle diameter: 120 mm x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm turning speeds: 19-1900 U/min table-size: 600x1200 mm table load: 2000 kg spindle taper ISO: 50 : Feed: 0,042-1,46 mm/U weight of the machine ca.: . t dimensions of the machine ca.: . m Tool holder: Steep taper No. 50 Din 2080 3.5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...
Brand: Abus Kran Systeme Type: GM1 250.6-111 Model: S13371 Serial Number: D780103/0009 Construction year: 1997 Weight: 40 kg Power: 50Hz Lifting capacity 250 kg Length mm: min 400mm - 5000 Width mm: 400 Height mm: 400 Working height: variable Maximum speed: 1.5/6.0 m/min Condition machine : Used Electric. Connection: 16A
7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V
KSB Water Pump Movitec VF 10/11 -L B Pump from 2022, as good as new, complete 2 available. 4 KW, 10 m3/h, 89 m Manufacturer: KSB Model: Movitec VF 10/11-L B Serial Number: 1750863-1 Type: Water Pump Power [kW]: 4 Flow rate [m3/h]: 10 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 70
Korimat KA 160 autoclave, 120 litres, 2.5 bar, MC control, autoclave for sterilisation with core temperature measurement, as a pressure pressure cooker for cooking meat, vegetables, soups and ready meals, electrically heated, circular marbled surface.
Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.
max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm serial no.: 526S130 number of spindles: 2 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x120 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooking and smoking system Kerres JET SMOKE RET-2250 Electrically heated Microprocessor control Integrated wood chip smoke generator in the door Dimensions approx. 168 x 107 x 250 cm Power 29 kW Operating voltage 400 V / 50 Hz
Three-phase motor, electric motor -Power: 13/19 kW -Speed: 730/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 670/357/H440 mm -Weight: 198 kg
One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet
Key data: 1650 mm, 850 mm, 790 mm
Machine Details Stock-No. 1105-03958 Type of machine Machining Center - Vertical Make kafo Type WMC 1675 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Price Technical details x-travel 1650 mm y-travel 850 mm Z-Travel 790 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1900 X 850 mm table load capacity 1500 kg Spindle motor 15 kW spindle speed: 6000 2 STEEP spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 15M total power requirement 30 KVA weight of the machine approx. 14 t Additional information - In Excellent condition - With machien documents - Rigid taping -fanuc oM
2000 Folding machine width 76 cm 4 buckles 2 knives 1 side buckle 1 glue station stream delivery ASP66-2ME In production Available: 02/2024 Located: Germany
Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/340/H304 mm -Weight: 70 kg
Kay Pini wood sawmill ground clearance 650mm frame stroke 500mm Full hydraulics Saw tensioning hydraulic switchgear
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
AC motor with 2 speeds, electric motor -Power: 3.3/13 kW -Speed: 725/1465 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 640/410/H330 mm -Weight: 135 kg
AC motor with 2 speeds, electric motor -Power: 2.7/10 kW -Speed: 725/1460 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 580/420/H310 mm -Weight: 112 kg
Power: 1400 kVA at 60 Hz, 1200 at 50 Hz - Currently set to 50 Hz! Hours: 778 Cooling: Water Speed: 1500 1/min Tank: 2000 liters Generator: Leroy Somer LSA 50 VL 10 Voltage: 400/231 V, 50 Hz Control Panel: LS 2000 A Generator, DSE 8610 MKII Deep Sea Control Was used as an emergency power system, therefore few operating hours Control and circuit breaker new! Subject to prior sale - errors possible! Internal Reference Number: E-1004-69
Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg
sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5
Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -Price/Sale: complete -Weight: 82 kg
Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK1 -Number: 1x recordings available -Price: per piece -adjustable in length -Total length: mm -Weight: 1.4 kg/piece
Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -suitable for: tool changer -Number: 1x recordings available -Price: per piece -Total length: mm -Weight: 1.6 kg/piece
Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK3 -with: CNC pull studs -suitable for: tool changer -Number: 1x recordings available -Price: per piece -Total length: mm -Weight: 3.6 kg/piece
Tool holder, milling holder, milling tool -15x recordings: SK40 -Adapter -Take: SK40 -Tool holder: 3x MK1/1x MK2/3x MK3/8x MK4 -Total length: mm -Sale: only complete -Weight: 23 kg
Tool holder, milling holder, milling tool -8x recordings: SK40 -1x diameter: 22 x 14 mm -1x diameter: 27 x 22 mm -4x diameter: 27 x 32 mm -1x diameter: 32 x 25 mm -1x diameter: 40 x 40 mm -Sale: only complete -Weight: 15.4 kg
Remaining: With fold-out parts Weight: 0,025 tons Length mm: 1900 Width mm: 500 Height mm: 1000 Working height: 100 cm Transport size L x W x H: 1,3 x 0,5 x 1,0 Min.-max glass size: 160 x 50 Condition machine : mediocre Missing parts: Wheel - For more information, please mail us: salestecfort.nl
tool holder, milling holder, milling tool -7x shots: SK40 -Adapter -Mounting: SK40 -Holder tool: MK4 -Drill chucks, face chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 9.4 kg
Tool holder, milling holder, milling tool -8x recordings: SK40 -Adapter -Take: SK40 -Tool holder: MK3 -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Total length: mm -Sale: only complete -Weight: 9 kg
maximum number of results exceeded
please refine your search
