k und g used for sale

Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023

Three-phase motor with 2 speeds, electric motor -Power: 4/5 kW -Speed: 930/1445 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -pole changing -Protection class: IP 33 -Dimensions: 585/400/H325 mm -Weight: 110 kg

Used tablet press made by KORSCH, model PH 343. New 1977.

Three-phase motor, electric motor -Power: 0.25 kW -Voltage: 230/400 V -Speed: 900 - 920 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP 56 -Dimensions: 205/130/H170 mm -Weight: 8.3 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 19 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/180/H150 mm -Weight: 6.1 kg

Foldingmachine 24P Make MBO Model K800.S 4SKTZ - FP Year 2008 Size Min: 150 x 210 mm / Max: 780 x 1200 mm Feeder MBO FP120 pallet feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt VIVAS suction alignment belt, slitter shafts prior to entering buckle station, exit to left or right by turning the section Folding configuration 4 platebuckles + 2 knives + 1 buckles after the first knife Delivery OMG Economic P700 pright delivery with pressing Number of pages 16-24 pages for signatures Details Vacuum pump, noise hoods, MBO Navigator controls Available direct

Bezel, setting stick, lynette -for: Crankshaft grinding machine -Max. flow rate: Ø mm -Peak height: 245 mm -Technical drawing: see photos Quantity: 1 piece available -Weight: 22 kg

Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)

Corundum stone mill Manafacturer: Koruma Type: 5-E Item no.: 3046 Year of construction: 1982 Power: 44 kW with screw pump (speed-controlled) overhauled and with new bearings with oulet chute & sight glass with control cabinet mounted on frame LWH: 2000 x 800 x 2000 mm

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 1430 rpm -Shaft: Ø 32 x 50 mm -Construction: B3 -Dimensions: 400/295/H350 mm -Weight: 85 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 750 kg -Chain length: 1.7 m -Dimensions: 600/115/H145 mm -Weight: 9 kg

Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)

Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase -Dimensions: 490/300/H70 mm -Weight: 22.4 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Ratchet tensioner for chain, safety chain, excavator safety, load safety -Load capacity: 2200 kg -Number: 4x available -Price: per piece -Dimensions: 275/280/H50 mm -Weight: 1.8 kg/each

Three-phase motor, electric motor -Power: 10 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: EX -Dimensions: 550/440/H315 mm -Weight: 113 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

we offer two identical emergency generators. Each is equipped with an 850 kVA Perkins genset installed in containers. a diesel tank is also possible for an extra charge. The units are fully operational and can be demonstrated at any time the second unit has 2900 operating hours

Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Travel: 450 mm -Piston diameter: 25 mm -Dimensions: 40/40/H650 mm -Weight: 1.6 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1415 rpm -Shaft: Ø 22 x 47 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 347/198/H220 mm -Weight: 27.3 kg

Knuth UFM 2 Universal Milling Machine Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm travel Y-axis 300 mm travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45° Cone of the SK 50 horizontal spindle Drive Main engine power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Cooling pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and weight Dimensions: 1900x1720x1750 mm Weight 2100 kg More items - new and used - can be found in our shop! International shipping costs on request!

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1400 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 250/200/H210 mm -Weight: 12 kg

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Year of construction: 1993 Capacity: max 600 cycles / hr. Dimensions disassembled : Length: 3,000 mm Width: 2,350 mm Height: 2,600 mm Weight: 3.000Kg Was used in a fruit juice bottling plant and is currently set up to handle the following formats: 6 x 1.0l VDF bottles – 6 crates, 3 heads / crate transverse Complete documentation available. The machine has already been dismantled and is ready for collection.

Three-phase motor, electric motor -Power: 24 kW -Speed: 1480 rpm -Shaft: Ø 55 x 105 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 760/500/H390 mm -Weight: 251 kg

Three-phase motor, electric motor -Power: 2.5/1.5 kW -Speed: 1420/2930 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 480/210/H230 mm -Weight: 39 kg

Wire-O punching machine Make JBI Model K50T Year 1991 Workingwidth 500 mm Tools 1 x 3:1 with round holes for books, 1 x 3:1 with round holes for calenders Available Direct

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 x 25 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 180/114/H155 mm -Weight: 5 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 920 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 250/166/H185 mm -Weight: 11 kg

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Processing plant Manafacturer: Koruma Type: Disho V160/300 Filling volume: 300 l Batch volume: 240 l Year of construction: 1983 No.: 3143 Power: 18.5 kW with pneumatic vertical lift with pressure gauge & sight glass LWH: 1600 x 850 x 2200 mm

Three-phase motor, electric motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 190/110/H155 mm -Weight: 4.9 kg

Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 1,850 mm max. load per pair of trusses 2,650 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 1,600 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB120x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB160x50 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 3,050 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB140x50 Agraffe: 5 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,300 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: 2C155 Agraffe: 5 HK (hook) clear width: 3,600 mm max. load per pair of trusses 3,700 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB150x50 Agraffe: 5 HK (hook) clear width: 3,600 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Weibert WJ-KS30S Oscillating edge grinding machine WEIBERT WJ-KS30S with polished veneer 400V 3 KW (4 HP) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Sanding belt back panel 1050x200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 HP) Can be switched on/off Machine table and guides made of GREY CAST IRON Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzle 120 mm Roll pull-out table widening Belt width 200 mm WJ-R00300 Optional at extra charge: Roll extension table widening WJ-R00101 Mitre stop WJ-R00102 Feeder console WJ-R00204 Driving device WJ-R00103

Nowicki KN1-125 Bowl cutter Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph

1 of used PadShrinkPacker, make KHS/Kisters, type PSP A-H (Advanced, High-speed), new 2013, operating side left, with Allen Bradley controls and Rexroth MI servo technology. With bobbin splicer. Used to pack various collations of standard 66 mm diameter beverage cans on pad plus film or in film-only. Was running in a canning line with nominal speed of 109000 cph.

KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...

Electric motor, light current motor -Power: 0.37 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Design: B5 -Protection class -Dimensions: 265/143/H143mm -Weight: 9.4 kg

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg