k und g used for sale

Machine was serviced annually. Maximum bottle diameter 69mm. Set up for the following formats: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Information without guarantee Yearly maintenance. Bottle diameter 69mm. Prepared for this sizes: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Informations without guarantee

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

Key data: 45 , 33000 , 1250

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Sound-insulated generator with Perkins diesel engine Power: 60 kVA Year: 2020 Operating hours: None Generator: Stamford / AvK S1L2Y1 Voltage: 400/231 V, 50 Hz Cooling: Water Tank: 175 litres Control panel: Manual and automatic operation with ComAp AMF9 generator circuit breaker, socket distribution Subject to prior sale - errors possible Internal reference number: E-1004-55

Palletizing system for trays or similar products.

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Electric motor, three-phase motor -Manufacturer: Katt, electric motor type FK 4 a -Power: 5 kW -Speed: 2920 rpm -Shaft: Ø 38 x 70 mm -Protection class: IP 54 -Construction: B14 -Dimensions: 410/290 / H210 mm -Weight: 44 kg

fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369 -permitted Weight: 450kg - Bolt circle: Ø 100 mm -Price per piece - Quantity: 17 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369/1 -permitted Weight: 450kg - Bolt circle: Ø 112 mm -Price per piece - Quantity: 49 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Number of spindles: 6 St. Working width: 250 mm Working height: 150 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. weight: 4770 kg Dimensions (L/W/H): 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connection line, connection cable, cable line, socket cable, socket line -Manufacturer: Festo, socket cable unused Ovp -Type: KMYZ-9-24-2,5-LED-PUR-B -Mat no.: 193786 -Number: 4x available -Price: per package -Dimension package: 200/180/H10 mm -Weight: 0.1 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG500U-6T -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Transformer, transformer, converter, three-phase autotransformer, converter, voltage transducer, current converter -Manufacturer: Ritz, voltage converter -Type: KSER 104/1 -Price: per piece -Number: 2 piece -Dimension: 75/105/H140 mm -Weight: 2.5 kg/piece

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels are covered on both sides with protective film -the panels can be cut with guillotine shears -the panels are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg

x-travel: 970 mm y-travel: 420 mm z-travel: 430 mm Control: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/min feed range lengthways and crosswise: 8-2000 mm/min feed range - vertical: 4-1000 mm/min rapid traverse longitudinal and cross: 4 m/min rapid traverse Z-axis: 2 m/min weight of the machine ca.: ca. 3,8 t dimensions: ca. 3050x2350x2320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: M30/36/2 -Max. Speed: 3045 rpm -Power: 7.5 kW -Voltage: 170/400 V see photo nameplate -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 585/290/H340 mm -Weight: 115 kg

Horizontal Käde packaging machine

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

sheet width - max.: 0100 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 1200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit for: Power chuck -with: transport trolley -Drive: Siemens 220/380 V 1.5 kW 1405 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1330/510/H1200 mm -Weight: 170 kg

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

NEW Labratory Mill Rolls 170 x 465mm Description attached! Next to this we are able to offer all sizes of Mills from Labratory up to 100" (2500mm) for attractive price! Please ask us!

Turntable, slewing ring -Outer diameter: below 650 mm -Inside diameter: above 460 mm -Height: 52 mm -Load capacity: 2500 kg -Number: 2x available -Price: per piece -Weight: 23 kg

KHS-KISTERS Innopack SP 060 V panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.

Capacity: 70 Tk/h (single track); year: 2009; panel: Simatic Touch Panel; control: S7-300; Power supply: 400 V, 50 Hz, 11kVa; Possibility of mounting handles in one or two ways. Possibility of attaching handles from a magazine or roll. Support for transparent and laminated film. Operator panel menu: DE/PL/ENG. Possibility of individual adjustment of formats to customer needs.

fuse base -Type: S27 -Price/Sale: complete -Quantity: 4 pieces -Weight: 4.8 kg

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Wire electrode, welding wire, welding wire -Manufacturer: Kaynak -Type: AS SG3 Ø 1.20 mm -Price: per piece Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight of roller: 15 kg

Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg

Stick electrodes 4.0 x 350 -Type: KESTRA BLUE -Weight: 4.4 kg

power cable -Telephone cable: 19553 -4-core -Roll dimensions: Ø 800/480 mm -Weight: 34 kg

winch, lifting winch, construction winch, anchor winch -mechanical winch -Holding force: 300 kN -with: freewheel and mechanical brake -Drum: Ø mm -Operation via: hand lever -2x winches available: 1x left, 1x right Price: per piece -Dimensions: 1140/750/H1120 mm -Weight: 760 kg/piece

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: 315 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Bolt circle: Ø 133.4 mm -Weight: 20 kg

Rail support -Type: SAT38/3 Price: per package -3 packages: 5 pieces each -Weight: 1 kg per package

Cable protection ring -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg