k und g used for sale

For Sale 1x Refrigeration dryer TB19, used, year 2000, functional. Until recently, it was still connected to the paint shop. Price plus 19% VAT, will be shown on invoice Forwarding possible by arrangement (on pallet). Technical data (see also nameplate in the picture) Overpressure: up to 16 bar Ambient temperature: 5° to 43° Connection compressed air: G 1" Dimensions (W x D x H): 0.62 x 0.54 x 0.96 m Weight: approx. 100kg Connection: 230V, approx. 3.5A

with 1 capping head Crown cork: 29 mm is being overhauled

Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks

- Year of construction: 1990 - Frame height: 3200 mm - For pallets: 800 x 1200 mm and 1000 x 1200 mm - Depalletising head: With clamping slats - Large bottle table: 1350 x 1900 mm - Bottle collation on single-lane conveyor L: 3000 mm

Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 working direction: rotating turret Working type: fullautomatic amount of capping heads: 8 electrical power supply kW: 5

The SEEMA CS200m carton sealing machine offers all the advantages you can expect from a reliable carton sealer. The lower and upper conveyor belt drive also transports flat or tower shaped carton formats and pastes them. Width: min. 175mm - max. 500mm Height: about 450mm Strom / Volt: 240 Optional accessories Replacement drive belts 1345x50mm (ID6108)

capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14

with 2 stations photo-oriented working direction: left-right Capacity: 8000 bph

Filling content - 150 ltr. Agitator - 0.75 kW Bubble - 800mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Spout - approx. 20 cm Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam

incl. dispenser Working direction: left-right Number available (price per tank): 1 Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 4000 working direction: rotating turret, left-right Working type: fullautomatic amount of capping heads: 4

Consisting of: - Rinser 20 nozzles - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Bowl: 120 liter, Description: With DGA33 control indicator With unloader, Speeds: 2 on knife, 2 on bowl, 2 mixing speeds, Power: 3 x 400V, 50Hz, 97A, Dimensions: 2050 x 1250 x 1250 mm, Weight: 1385 kg

Bowl: 2 speeds, Description: Including unloader and BW200 loading device With water counter, Knife speed: 6 steplessly programmable speeds, Mixing: 2 reverse mixing speeds, Controls: Auto-Command 1500K, Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h, Compressed air: 6 - 10 Bar, Water: 4 - 6 Bar, Power: 3 x 400V, 50Hz, 157kW, Dimensions: 2600 x 3650 x 1700 mm, Weight: 4300 kg

Edge banding machine Type: O KDF 220 C Manufacturer: Brandt Year: 2016 Pre-milling unit Adhesive unit Miter saw Milling unit Corner rounding unit Cleaning units Pre-mills recently replaced, serviced + spare tub for overhaul Machine in good condition, fully functional, under power Find more here - / Contact us at -

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis C-Achse zum Polygonschleifen B-Achse mit Handschwenkung Schleifscheibendurchmesser links 400mm Schleifscheibendurchmesser rechts auf Anfrage Innenschleifeinrichtung Reitstock mit Feinverstellung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Kelco 90 total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Passive Lämgspositionierung Movomatic TMP91 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Komplett überholt mit Umbau auf Technik der modernsten Ausführung. -Neuer Schaltschrank -Modernes Hydraulikaggregat -Moderner Werkstückspindelstock -Moderner Reitstock mit Feinverstellung -Moderner Steuerblock,Zustellung,Getriebekasten -Innenschleifvorrichtung für Sp ...

x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 900 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 surface area: 2200x960 mm turning speeds: 20-1700 U/min Tool bore: SK 50 type: DIN 69871 mm rapid traverse: 10 m/min total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7x4,2x2,9 m Milling head four head positions-manual The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Mar ...

x-travel: 600 mm y-travel: 400 mm z-travel: 600 mm Control: Heidenhain type: 410 M mm : elktr. table surface area: 750x450 mm distance spindle /table: 690 mm Table load: 500 kg spindle taper ISO: 40 Cooling through the spindle: bar turning speeds: 9000 U/min spindle motor: 7,5 kW total power requirement: kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: m Good condition Very few operating hours The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...

Kawasaki RS05L Robot E-Controller with Cabin Control: E-Controller Number of axes: 6 Max. load capacity: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams, floppy disk drive for data backup In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Palletizing robot Kawasaki CP300L E-Controller Profibus Control: E-Controller Number of axes: 4 Max. load capacity: 300 kg Max. working range: 3255 mm Year of manufacture: 2/2015 Scope of delivery: robot, controller, cable, teachpanel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

KUKA KR 180 Series 2000 robot with 3m process axis max. weight: 180 kg Max. reach: 2700 mm Max. Payload: 180kg Dimensions: 2700mm Number of axes: 7 Year of Make: 2001 Scope of delivery: robot, controller, cable, teaching panel, circuit diagram In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot stud welding robot for thread M5 (convertible) KUKA KR 180 KRC2 complete Control: KRC2 Number of axes: 6 Max. load capacity: 180 kg Max. working range: approx. 2700mm Year of Make: 2003 Scope of delivery: robot, controller, cable, teachpanel, circuit diagrams, stud welder In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Shelf-mounted Robot KUKA KR16 KS KRC2ed05 Year 2006 Euromap 67 (Extension not available in the picture) Control: KRC2ed05 Number of axes: 6 Max. load capacity: 16 kg Max. working range: approx.: 1800 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Palletizing Robot KUKA KR40PA KRC2ed05 Control: KRC2ed05 Number of axes: 4 Max. load capacity: 40 kg Max. working range: 2091 mm Year of manufacture: 12/2009 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams, floppy disk drive for data backup In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA KR240 R2700 prime KRC4 - mechanics only Max. load capacity: 240 kg Max. working range: approx. 2700mm Scope of delivery: robot mechanics without accessories In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Label Rewinder

KUKA KR200 comp Series 2000 robot with traversing axis, 4 meters long Control: KRC2ed05 Number of axes: 7 Max. load capacity: 200 kg Max. working range: 2400 mm Year of Make: 2009 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

2004 5 Color 720x1030 mm 200 million Komorimatic with Technotrans Beta c PQC IV with PDC-S S-APC powder sprayer Grafix KMS IV with adjustment of diagonal register (cocking) AMR all washing devices KHS On stock Available: immediately Location: Europe

Cream cooker, pasteurizer, cooker with recooling Capacity for approx. 70 l Stainless steel boiler (double-walled) Electric heating and cooling unit with water cooling with agitator and boiler scraper with TOUCH control Temperature +1 °C to +110 °C Spout by means of ball valve

Robot KUKA KR10 R1100-2 / SEL KRC4 2 pieces available 1x 135 and 1x 82 operating hours Year of construction: 10/2021 Number of axes: 6 Max. load capacity: 6 kg Max. working range: approx. 1100 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

KUKA KR30L15/2 robot - KRC2 controller This used robot (built in 1998) from KUKA is perfect for metalworking and locksmithing. With a payload of 15 kg and a reach of approx. 3100 mm, the industrial robot offers a high degree of flexibility and precision. The KRC2 controller allows for easy programming and operation. The robot is in very good condition and comes with a warranty. Ideal for companies that want to automate their production processes. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

KUKA KR150L110 robot Number of axes: 6 Max. load capacity: 110 kg Max. reach: approx. 3100mm Year of manufacture: 8/2009 Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Capacity: 700 pc/h, Belt width: 325 mm, Diameter cutting ring: 270 mm, CIP unit: hot water min. 60 degrees Celsius, Compressed air: 5 Bar, 3.5 Nm³/h, Power: 3 x 400V, 50Hz, 2kW, Dimensions: 1600 x 1150 x 1500 mm

This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details.

Panel saw FORMAT 4 Kappa V60 -used-welded frame with extremely high rigidity, automatically evasive moving grate, stable detent of the saw carriage at the top and bottom, control panel at eye level, digital display at the longitudinal stop, digital display for horizontal cut, stiffening cutting device, lifting roller transport system, edible support, extraction device TRK, dust-tested---------- Technical data ----------cutting length: 4,300 mm, cutting height: 2,200 mm, cutting depth: 60 mm, Saw blade : 250 mm, Motor: 3 kW,

-Model : Thermal platesetter KODAK CREO LOTEM 800 II QUANTUM S YEAR 2009 -Totally refurbished from Kodak in 2013 -Software version 3.82.12 -Autoloader with 1 cassette of 50 plates capacity , Internal punching system -Approx 13.000 plates done , speed 19 plates per/hour -Included : RIP Creo Prinergy installed with 2 computers and monitors -Stacker Egraftech year 2013 -Plate size: max 1130x900 mms. -Resolution: up to 2540 dpi -Available immediately , complete with all accessories, in good conditions

2 round black PE 100 tanks, double-walled for storage of nitric acid and caustic soda Capacity per tank 20,000 l, tank filling height 2.83 m. Manufacturer No. 3848-16927D-7973 Year of construction 2014 with complete pipe dismantling, is on the production site

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

KRAMER UTS 4.1 TABLET TESTER Tablet testing system for checking the hardness, thickness, diameter and weight of tablets. Sold for parts. Built in 2000. CHARACTERISTICS - Precision balance: Sartorius WZ64S (with scale: 10 - 50 g; Unit: mg / 0,5 mg / 0,1 mg (adjustable) - Sampling can be triggered either in the production machine or via the TTS11 software PRODUCTION - Tablets shapes: round, oval, square and oblong tablets, special shapes (for delicate oblong tablets, the proven oblong centring system (OZB) can be integrated) ENERGY CONSUMPTION - Tension: 100/240 V, 50Hz/60 Hz, 4 A

Storage tape especially for automation (e.g. "ghost shift", clipboard, buffer) Consisting of two ribbons on one belt, the empty cartons are and on the second belt are the filled cartons. The two conveyor belts are equipped with the EUROMAP67. This allows the belts to be connected to the machine and the removal robot programmed. Manufacturer: KRAUSS MAFFEI Year of Make: 2010 Length of the conveyor belts: 6.00 m each Width of the conveyor belts: 1.75 m in total

Digital printer Type: AccurioPrint C3070L Manufacturer: Konica Minolta Year: 2018 Included toners 2xY, 3xC, 3xM and 1xK + densitometer (original KonicaMinolta) Printer in good condition, fully functional Find more here - / Contact us at -

Electric drive Foot switch actuation, Various tools are included in the delivery: 1 x top/bottom knife with radius 4 mm 1 x top/bottom knife with radius 6 mm 1 x top/bottom knife with radius 7 mm 1 x top/bottom knife with radius 8 mm 1 x top/bottom knife with radius 9 mm 1 x top/bottom knife with radius 15 mm (currently in use)

KBT-13.AKBT-13.ACustomizingwith customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!with customizing!

x-travel: 4000 mm y-travel: 1400 mm z-travel: 1500 mm Control: Heidenhain type: TNC 426 power capacity: 30 kW transmission ratio: 2 turning speeds: 20-2800 U/min spindle taper ISO: 50 Feed: 4000 mm/min Rapid movement: 10000 mm/min surface area: 4200x960 mm T-slot - width: 22 mm T-slot - distance: 140 mm table load: 8500 t chip conveyor: total power requirement: 57 KVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3x4x3,7 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find furthe ...

number of controlled axis: 7 workpiece weight: 7 kg weight of the machine ca.: 0,024 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.19 m, Overall length= 0.74 m, Overall width= 0.67 m, Net weight= 89 kg,