k und g used for sale

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsFryma KorumaProcessing vessels > Processing vess ...

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

turning diameter: 500 mm turning length: 1000 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm dimensions of saw-blade: 450 x 45 x 2,0 mm cutting width: 280 x 200 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: square: 170 x 200 mm cutting speed: 16- 32 m/min power requirement: 1,3 kW dimensions: 1,3 x 0,55 x 1,0 m weight: 180 kg Used hook saw in good condition - less used, only for our own light use. - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300 mm ...

A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible.

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

KOCH TECHNIC Feeder/Doser/Mixer Set 1 Pallet Type : TM 6D Year: 1995 Dimensions (L x W x H) : 1,20m x 0,90m x 0,50m Weight : 100 kg

Excellent condition - Fully operational - Loading / Transport possible! saw: Kappa Automatic 100 lifting table: Silverstone HW4002 with lifting capacity 4000 kg KOGI dust extraction system with a capacity of 4000 m3/h AIR BOX compressor with GUDEPOL dryer Main Saw Size: max. fi355 x 30 mm min. 250 x 30 mm size of scoring saw: fi150 x 30 mm Installation Dimensions: saw: 7250 x 6050 x 1900 mm lifting table: 2000 x 1200 x 250 mm dust extraction: 3200 x 750 x 2800 mm compressor with dryer: 2100 x 500 x 1000 mm Transport Dimensions: Front saw beam: 7650 x 900 x 1800 mm Front Supports: 2100 x 700 x 1000 mm bumper beams and fencing: 4600 x 1000 x 1200 mm Bumper beam: 4100 x 900 x 500 mm Control cabinet: 1200 x 300 x 1050 mm Fan: 700 x 7500 x 1300 mm Filter: 1300 x 900 x 2800 mm compressor with dryer: 2100 x 500 x 1000 mm

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

List of spare parts for Krauss-Maffei MC3 injection moulding machine (KM 1600 T & 2300 T) 1 Calzoni MRE3100I hydraulic laminating motor reconditioned by FHP 1 LCD screen Voith variable flow triple pump : Type IPV /7-250 and Type : IPV7-200 VT 5041 Power Boards 2 VT-VRPA power cards (Orginal Packaging) 1 VT-VRRA power card (Orginal Packaging) 1 keyboard 1 LCD screen 2 GR 400 cards (Orginal Packaging) 2 AE 501 cards(Orginal Packaging) 1 SE 502 card (Orginal Packaging) 1 IO 502 card (Orginal Packaging) 1 NT 500 transformer 3 heating collars 10 KW

ID3781 Klemm KR500 year/Baujahr 2005 5,800 hours/hours Anchor drilling rig, KH4 rotary drive, hydraulic power pack with electric motor type PP-37-E (on crawler tracks), drilling gun mount 2 m and 1.8 m, 1 complete undercarriage with crawler tracks (new) as spare parts package, spare parts package accessories for KR500 Anchor drilling rig, rotary actuator Klemm KH4, hydraulic gregeat power pack with electric motor type PP-37-E (on crawler track), drilling mount 2 mtr. and 1.8 mtr., 1pc. complete Undercarriage with crawler undercarriage (new) as ET Package, ET Package Accessories for KR500

Used Lifting Kneader KEMPER, Type: F 15 S -In Bakery Condition- - for 15 kg flour or 24 kg dough - New stainless steel boiler - 3 gears / speeds - with protective grille - Technically everything tested and cleaned - Very smooth running - Condition very good - Video can be sent Visits and test runs are possible by arrangement.

General SKU004U062 MakeEngelsmann TypeKSM-9 Cbm No.10 562 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume12000 Ltr. Motor16 KW Specified Features - Pre-mixer Pre-mixerConical screw mixer (1x) Capacity12.000 Ltr, Useful 9.000 Ltr Vessel sizesdia. 2100x5050mm Manholedia. 500mm Inletdia. 150mm Motor11/16 KW, 500 Volt (Ex) Speed mixing shaft3/6 Rpm MaterialStainless steel 1.4541 (321) Information Floorspace2,2x2,2 M Total height6,5 M Weight8500 KG ATEX compatiblecheck Extra Specifications- Jacketed screw (120 Ltr), Working pressure 4 bar (Test pressure 5,2 Bar) DiscountPre-mixersEngelsmannDiscountMixers > Pre-mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

cutting diameter: 280 mm capacity 90 degrees: flat: 280 x 160 mm capacity 90 degrees: square: 240 x 240 mm band length: 425 x 40 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: flat: 150 x 250 mm capacity 45 degrees: square: 170 x 170 mm total power requirement: 1,8 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,4 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998

Dorin K50CS All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Floor-standing unit approx. 100l capacity Stainless steel version with agitator with boiler tilting device with outlet tap double-walled, with thermal oil/electric heater Heating 50 - 200°C

Manufacturer: PAAL Model: KONTI 700 G/S/K Year of Manufacture: 2011 Type of Machine :Baling Press Key Features - Cross-lacing system (optionally switchable) - Oil cooling system - CE marked Find more here - / Contact us at -

This 7-axis KASSOW ROBOTS KR1205 was manufactured in 2020. It features a reach of 1200 mm and a payload capacity of 5 kg, making it suitable for various applications. The robot arm includes an original Kassow Controller and a tablet teach pendant for ease of use. If you are looking to get high-quality automation capabilities, consider the KASSOW ROBOTS KR1205 robot arm we have for sale. Contact us for further details.

Manufacturer: Reckermann Model: Delta 1300 Kombi Configuration: 3-axis combination Find more here - / Contact us at -

A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible.

sheet width: 2520 mm plate thickness: 3.2 mm ST cutting thickness max.: 5.0 mm AL cutting thickness max.: 1.5 mm VA no. of strokes: 34 Hub/min cutting angle: 1° 20 Grad back stop - adjustable: max. 1.000 mm work height max.: 800 mm total power requirement: 7.5 kW weight of the machine ca.: 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type E10-S - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - origina ...

PLASTIC ELECTROPLATING PLANT ENTHONE GMBH, BJ. 2012: Automated system / area of application: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Goods window per product carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per product carrier, cycle time 3.00 min. system, cycle time 2.50 min. demetallization / output: 20 pcs. merchandise carriers per hour, clearance anode/anode chrome 700 mm, Copper 700 mm, nickel 700 mm, clear retraction dimension 550 mm in the direction of travel, 3100 mm in width, bath dimensions (rinsing) 3100 mm x 700 mm, / power consumption: drives: transport system 133 KW, filter 194 KW, exhaust air 229 KW, sewage system 150 KW, switchgear 704 KW, rectifier approx. 3190 KW, heating energy approx. 1410 KW / consisting of: automat ...

This 4-axis LASAG KLS 246 CL60 laser welding machine was manufactured in 2008. It offers advanced laser welding capabilities suitable for precision applications. Consider the opportunity to buy this LASAG KLS 246 CL60 laser welding machine. Contact us for more information about this machine.

permissible. Total weight: 2300 kg, with loading bucket

Offset Printing KOMORI S40, Model: LS-640, 6 Color + normal Varnis (UV-Varnish equipment is als available), Year: 2004, 253 mil. Impression, Max.Size: 1030x720 mm, Min.Size: 520x360 mm, Max.Speed: 16.000 Sh/h, Autom. Platechange, Komorimatic, Autom. Blanket washing, Autom. Roller and Cylinder washing, Technotrans, IR-Dryer, in Production, Available in June 2026

Key data: 60 kVA

380V 64 A Plug Length 1.20 m Width 0.80 m Height 1.75 m Weight 350 kg Color: Green Compressed air for control Machine is unchecked.

Holder Metabo for Flex 230 mm Length 0.5m Width 0.5 m Height 1.30 m

380V 16A Plug Cables and connectors new Length 0.87 m Width 0.4 m Height 1 m Color: Gray

380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object

Karl Tränklein ZP-COMBI I, Press force: 5000kg

Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                         ...

Manufacturer: KASTO Type: Automatic band saw Year of Manufacture: 2018 Find more here - / Contact us at -

Manufacturer: KASTO Model: E2 Type: Automatic band saw Find more here - / Contact us at -

Manufacturer: KEYENCE Model: VL 7701 Type: Optical 3D measuring machine Year of Manufacture: 2025 Find more here - / Contact us at -

Manufacturer: KOKI TEC Model: SELBO III 350 Type: Inline selective soldering machine Specifications - Outer dimensions: 2,750 (L) x 1,430 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 350 (W) x 400 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 14 kVA (heater) / 6 kVA (solder pot) - Net weight: 420 kg (fluxer) / 370 kg (heater) / 450 kg (solder pot) Find more here - / Contact us at -

Manufacturer: KOKI TEC Model: SELBO III 5051 Type: Inline selective soldering machine Specifications - Outer dimensions: 3,236 (L) x 1,577 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 500 (W) x 510 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 20 kVA (heater) / 6 kVA (solder pot) - Net weight: 450 kg (fluxer) / 390 kg (heater) / 480 kg (solder pot) Key Features - Improved soldering quality with reduced solder defect rate - Inline automation for labor savings in PCB assembly - Modul ...

Manufacturer: KOKI TEC Series: ULTIMA (TakuROBO Benchtop Type) CE Mark: Registered on all three units System comprises: ULTIMA-TRZ + ULTIMA-SPZ + ULTIMA-PHS Suitable for: Prototype to small and medium volume PCB production ULTIMA-TRZ Selective Soldering Machine - Dimensions (without signal tower): 940 (L) x 885 (W) x 540 (H) mm - Outer dimensions (with signal tower): 940 (L) x 885 (W) x 753 (H) mm - Body dimensions: W620 x L940 x H442 mm - Minimum PCB size: 50 (W) x 50 (L) mm - Maximum PCB size: 250 (W) x 330 (L) mm - PCB thickness: 0.8 to 2.0 mm - Machine weight: approx. 120 kg - Power source: single-phase AC 200V plus/minus 5 percent, 4 kVA - Nitrogen supply: purity 99.99 percent or more, 0.4 to 0.5 MPa, 25 L/min - Solder pot capacity: approx. 16 kg (specific gravity 7.3) - Nozzle range: 17 sizes from diameter 2 to diameter 20 mm inner diameter, including Aerojet - nozzle - Stand ...

Kuka robot KRC2sr + KCP2 + KR5 sixx R850 Number of axes: 6 Max. load capacity: 5 kg Max. intervention: 850 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Cobot Universal Robots UR5 complete only approx. 4487 operating hours Year of manufacture: 1/2017 Number of axes: 6 Max. load capacity: 5 kg Max. working range: approx. 850 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot KUKA Lightweight Robot Cobot iiwa 14 R820 Sunrise Cabinet new/orig. box Year of manufacture: 12/2014 Number of axes: 7 Max. load capacity: 14 kg Max. working range: approx. 820 mm Scope of delivery: robot, controller, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

For Sale 1x Refrigeration dryer TB19, used, year 2000, functional. Until recently, it was still connected to the paint shop. Price plus 19% VAT, will be shown on invoice Forwarding possible by arrangement (on pallet). Technical data (see also nameplate in the picture) Overpressure: up to 16 bar Ambient temperature: 5° to 43° Connection compressed air: G 1" Dimensions (W x D x H): 0.62 x 0.54 x 0.96 m Weight: approx. 100kg Connection: 230V, approx. 3.5A