131,090 used machines on RESALE, but how to find them? Machine Search
Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02 x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06 x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 24 x Shelf Racks, Used Suitable for smooth stands Material colour: sendz. ...
Kerres JS-RET 1650 Smoke System, Universal System, Electrically heated, with connection for cooling, Connection 400V, power 18kW, Dimensions of smoke chamber inside WxDxH approx. 100x82x155cm, without smoke wagons, good used condition, fully functional, already dismantled, stored on pallets
KNF N035.3AN.18 IP20 Vacuum Pump New equipment in its original packaging Year of manufacture: 2021 Technical features: Vacuum limit: 13 mbar abs. IP20 Pump Head Aluminium Membrane: Neoprene (CR) Flap: Stainless steel Voltage: 230 V, 50 Hz Current: 1.55 A Power: 270 W Pump Flow Rate: 30 l/min Dimensions: 323 x 250 x 222mm
General SKU320S561 MakeKEK products (UK) LocationBarneveld Main Features MaterialMild steel Motor4 KW Length750 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizes300mm Screw sizes750mm Inlet200x200mm Outletdia. 300mm (1x), dia. 115mm (1x) With inspection hatch420x255mm Motor4 kW 415 Volt With sieve cagecheck Sieve perforation4x4mm MaterialMild steel Information No.8578.K800.10163 Year of construction1997 Mounted on mild steel framecheck Floor space1,9 x 1,0 m Total height2,0 m Weight360 kg Extra Specificationsincluding magnet on the inlet (Magnetic Separations Ltd) Rotating sievesKekSieves > Rotating sievesBrand > Kek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...
Measuring range: - Standard mode 200 × 200 mm - Precision mode 125 × 125 mm Measurement repeatability: up to 0.5 μm Photoelectric sensor measurement Lighting system: transmitted light and ring light Storage: 500 GB hard drive Interfaces: 1 × LAN, 4 × USB 3.1, 2 × USB 2.0 Power supply: 240 V
Stock shape glue + press belt, Type: SFAM 712_G, Year: 1995, Max.Size: 1650mm, Pressband Tünkers, Type: SFAM 712_G
KERMA punching pot, Max. Size: 1220x820 mm, Security fence, Safety mats 2 pieces
Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and ...
A Wolf checkweigher with an integrated weighing unit Wipotech IW 40K is available. Infeed conveyor length: 600mm, weighing conveyor length: 700mm, outfeed conveyor length: 600mm, belt width: 400mm, direction of travel: right-left, max. product weight: 17kg, graduation: 1g, max. weighing weight: 15kg, throughput: approx. 200 products/min. Machine dimensions X/Y/Z: approx. 1300mm/500mm/1300mm, weight: approx. 200kg. Documentation vorhanden. An on-site inspection is possible.
Dough dividing machine Kemper Consul ET dough weigher - Manufacturer: Emil Kemper GmbH - Type: Consul - ET - Year of construction 2003 - With manual control
Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200
A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available. Rego Herlitzius - Creel machine - on castors - with lubrication - Cutting machine 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer. HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm
Eurotherm Antrieb Digitalregler 3G-KOMPAKT 637/K D6R 10-7
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 3,290 mm Number of fields per row of shelves: 02 pcs. The scope of delivery includes: 03x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 12x shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 48x Shelf Racks, used Suitable for smooth stands Material colour: sendz. gal ...
Aircooled chiller KKT cBoxX 90 83 KW Cooling capacity: 83 kW / 23.6 tons (tw2=20°C / tu=32°C ) Year of manufacture: 2021 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSH161A4ALD (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90HA-J-H3-CML2A + 1 pcs. Grundfos ML132DA-J-H3-CML4A, buffer tank (open-type). Dimensions: 1.84x0.83x2.03 m. Weight: 1230 kg. Working hours: 1/1 h. Condition: New
Digital Microscope Controller for VHX-7000 Series Console for VHX-7000 Camera Unit High Performance Camera VHX 7020 Tripod (motorized in XYZ 100mm) VH Zoom Lens 20x-200x Tripod adapter for VH-Z20 Polarization adapter for VH-Z20 3D Measurement Software for VHX-7000 Bracket for VHX-S770E/750E Viewing by telef. Arrangement possible used, bought as seen, without warranty Price = 53000.00 € + VAT Invoice due upon readiness for shipment or delivery
Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 4,920 mm Number of fields per row of shelves: 02 pcs. The scope of delivery includes: 04x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 18x shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 72x Shelf Racks, used Suitable for smooth stands Material colour: sendz. gal ...
Shrinking equipment Shrink tunnel KUPER ST/I-1400 1350x650mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm
10 adjustable speeds, forward and backward. Used spiral squeegee available.
Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 8,190 mm Number of fields per row of shelves: 05 pcs. The scope of delivery includes: 06x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 30x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 120x Shelf Racks, Used Suitable for smooth stands Material colour: sendz. ga ...
Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm
Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motor Max. sanding thickness: 150 mm. Throughput speeds: 2,5 - 11 m/min Motor through-belt: 0,55 kW Height adjustment motorized, motor 0,26 kW Automatic thickness adjustment Input rollers length 700mm Output rollers 1600mm Touchscreen
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication
4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...
Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC
Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...
Robot Maximum reach: 3195mm Rated payload: 180kg Maximum payload: 230kg Maximum supplementary load, rotating column / link arm / arm: 300kg / 130kg / 150kg Pose repeatability (ISO 9283): +-0,07mm Number of axes: 5 Mounting position: Floor Footprint: 754mm x 754mm Weight: 1017kg Protection rating (IEC 60529): IP65 Running hours: 1053h Vacuumsystem Dimensions: 1700mm x 900mm 350mm Construction of 56 SCHMALZ cups dia 50 and 70mm with pushrod for loosen plate FESTO components for compressed air/vacuum Each cup separately controlled by FESTO controller Communication via Profibus
Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg
Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details.
This 3-axis Kitamura KNC 150 NSA was manufactured in 2010. It features a twin spindle configuration with a maximum speed of 5,000 rpm and a spindle power of 7.5 kW. The machine includes an 8-station turret and a part catcher with a conveyor for efficient automation. If you are looking to get high-quality turning capabilities, consider the Kitamura KNC 150 NSA horizontal turning machine we have for sale. Contact us for further details.
A wet glue rotary labeling machine Krones for bottles is available. Bottle formats: 1l/0.75l. Including various format parts and variable label magazine. An on-site inspection is possible.
Number of milling spindles: 4 St. fence: ja ja /nein workpiece: ja Stegherr KSF 2/4 - The modern, practical machine concept for efficient crossbar production. Years of expertise and a sophisticated, thousands-proven machine guarantee precision at an optimal price-performance ratio. Particular emphasis is placed on the machines ease of use and flexibility. KSF 2/4 upgrade: Milling units A1, A2, A3 as with KSF 2. + Milling unit A4, machining of the counterpart without turning, view side absolutely tear-out-free. Digital fence (moving carriage, reliable and quick readability to 1/10 mm). foot switch With tools in the machine as shown in the pictures plus 2 additional profile cutters, see pictures. Further accessories are shown in the pictures. Compressed air pressure: p = 6 bar The following work was carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexig ...
This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details.
table length: 840 mm table width: 600 mm ampere: 60-120 A total power requirement: 15-23 kVA weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2760 x 1110 x 1840 m With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): ...
x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal Band Saw manufactured in 1999. This KASTO HBA 520/620 U features a working area of approximately 520 x 620 mm and includes a roller conveyor for efficient material handling. With a total length of around 350 cm, this machine is designed for precision cutting in metal applications. If you are looking to get high-quality cutting capabilities, consider the KASTO HBA 520/620 U machine we have for sale. Contact us for further details.
Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.
This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details.
Year: 2021 Axles: 6 Max Reach: 2701mm Rated load: 210 kg Max load: ~270 kg Weight: 1107 kg Control: KRC4 Remote control: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series) Serial Number: 1077133
This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details.
Year of manufacture: 2020 Serial Number: 10023754 Load capacity: 360 kg Reach: 2830 mm Control: KRC4
maximum number of results exceeded
please refine your search
