130,488 used machines on RESALE, but how to find them? Machine Search
LAPPING MACHINE Hahn & Kolb LHD 0 Machine from a state institution/Very well maintained -Lapping disc diameter 400mm -Max. workpiece height 110mm -Max. distance between the cast lapping discs 80mm -Speed range 40-80-160 rpm -Speed drive motor 700-1400-2800rpm -Total power 1.8-2.7KW -Turning device manually operated Hebkn Au Sevdkvfo Tol -Original documentation -Well preserved original condition Dimensions: LxWxH 1.4x1.3x1.9 meters / weight 1600Kg
Klopp 1000 Quick Planer Total width: 150 cm Overall length: 3,330 cm Total height: 170 cm Planing width: 750 mm Working length: 1000 mm Table width: 900 mm
KÖLSCH, universal milling machine UNI1-UNI4 Universal milling machine suitable for pitch circle and full circle work, setting hole patterns with integrated dividing table and coordinate milling system.
Key data: 1100 kN
Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...
KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG
Key data: 350 kN
Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : Clamping force: 35 t Tiebar spacing: 320x320 mm Size of the clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air Valve x 2 Control with hot runners x 6 Hardened injection unit - Bimetal The machine was regularly serviced by the authorized service Krauss Maffei in Germany It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating capacity: 3.78 kW Total power: 14.78 kW All offered machines are s ...
Key data: 11
Shamal K60 Suitable for 15 hp, flow rate 1745 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=245mm Y=300mm D=550mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Key data: 800 kN
Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of Make: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Spray pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing device, volumetric with container - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heatin ...
Shamal K30 Suitable for 5.5 / 7.5 hp / 4 / 5.5 kw, flow rate 900 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=190mm Y=225mm D=400mm This compressor pump is used by several compressor manufacturers. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Automatic roll stippling machine with pallet magazine Kalcher STA-K - Type: STA-K - Year of construction: 2000 - Pallet magazine with 16 supports - Machine for one-man operation for forming Kaiser, Stern, Salz or Poppy seed (button) and pressure rolls
Key data: 1300 kN
Krauss Maffei KM 130-750 CX Year of Make: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Spray pressure: 2500 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Air Core Pull x 6 Control with hot runners x 18 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Straight Machine Ecomatic Direct Dampening system Remote control of ink and registers PWHA Semi automatic plate change Automatic washing for ink rollers Automatic washing for blankets Automatic washing for impression-cylinders Technotrans Refrigeration Double diameter cylinders Powder sprayer High pile delivery Free of damages In production
Key data: 2000 kN
Krauss Maffei KM 200-1400 CX with the Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Injection weight: 617 g Spray pressure: 2007 bar Dosing volume: 679 ccm Clamping unit: Clamping force: 200 t Tiebar spacing: 560x560 mm Size of the clamping plates: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Hydraulic core pull x 3 Air Core Pull x 3 Control with hot runners x 10 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injec ...
Key data: 2500 kN
Krauss Maffei KM 250-2000 CX Blue Power with the Sepro Industrial Robot SR S5-35HL S4 Trans robot Year of Make: 2019 Injection unit: Screw diameter: 70 mm Spraying weight: 980 g Spray pressure: 1877 bar Dosing volume: 1077 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Air Valve x 1 Hydraulic core pull x 3 Air Core Pull x 1 Control with hot runners x 16 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injection Additional ...
Key data: 4000 kN
Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Handlebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authorized s ...
roll diameter: 250 mm roll length: 600 mm rolls drilled: -- nip adjustment: -- drive power:: 46 kW Condition: used Specification: 3-roll I-calender 250x600 - used - Collin 3-roll I-calender 250x600 Application: Smoothing/finishing of film materials up to 2 mm thick. Machine configuration: with unwinder upstream and rewinder downstream. - Upper and lower rollers adjustable for gap adjustment. - Roller diameter: 252 mm - Roller length: 600 mm (normally 500 mm) - Rollers 2, 3: temperature-controlled up to 320 °C - Heating power: 9 kW / roller - Speed: infinitely variable - Roller speed: +/- 8.6 rpm - Roll adjustment: 0 - 2 mm - Hydraulic unit: 2.2 kW - Oil cooler: 0.25 kW - Servo motor rated power: 1.4 kW / roll drive - Unwinding unit: 0.24 kW - Rewinder: 0.24 kW - Space requirement approx.: 3,120 x 1,800 mm - Total height appro ...
Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.
Kalix Dupuy horizontal intermittent cartoner, Elec: 16 A , A (mm): 20 to 70 , B (mm): 15 to 60, C (mm): 70 to 200
Format KILIAN 25/32 Compression 8500 kPa (kilopascals), Weight (kg): 1011, Dimensions (mm): 830 x 740 H 1960, Maximum tablet dimensions (mm): 20, Maximum powder filling height (mm): 20, Die diameter (mm): 35, Number of positions: 20
Useful capacity of the product tank: 50 litres Total capacity up to the edge of the tank: 80 litres Operating overpressure in the product tank: -1/+2.0 bar Maximum temperature in the product tank: 125 °C Operating overpressure in the double jacket: 4.0 bar Maximum temperature in the double jacket: 140 °C Stainless steel: 1.4435 1350 Kg Variable motor speed: Outer mixer arm: 11-44 rpm Inner mixer arm: 21-84 rpm Homogeniser: 1150-4350 rpm, Volume: 80 liters , Useful volume: 50 liters , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 liters , Double envelope pressure: 4.0 bar , Weight (kg): 1350
Elec: 230V / 50HZ , Weight: 150 kg, Min max weight (g): max 300g, Minimum maximum weight (g): max 300gr, Pack min: 100 / min, Minimum maximum temperature: +5°C - 40°C, Pack mn: 100 / min, e: 0.1g, Cadence: m/min: 27 m / min, Min pack: 100 / min, Transfer direction: from left to right, Min max temperature: +5°C - 40°C, Cadence: m / min: 27m/min, Direction of transfer: from left to right
Elec: 5.5 HP, Dimensions (mm): 1100 x 1220 H 1900, Maximum tablet height (mm): 20, Max tablet height (mm): 20, Maximum height of tablets (mm): 20, Maximum powder filling height (mm): 20, Machine height with hopper: 1900, Machine height without hopper: 1880, Weight (kg): 1850, Number of stations: 33, Tablet diameter in mm (min / max): 2 - 20mm, Tablet diameter in mm (mini/maxi): 2 - 20mm
Oil pump for compressor lubrication Serial No.: MKE 2 C/KAW 3 QN 0.2 l/min, Installé précédemment sur: COURTOY R100, Previously installed on: COURTOY R100
General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder MaterialStainless steel 1.4000 (410S) Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zonescheck 3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hoppercheck Buss ELS 70 Feeding with metering screwcheck 63 rpm Information TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersNew arrivalsBussExtruders > Mixing extrudersNew arrivalsBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...
General SKU201P114 LocationBarneveld MakeKSB TypeCPKN.C1.V 025-200 No.P.105.100 Main Features MaterialStainless steel Volume5000 Ltr. Motor5.5 KW Specified Features - Centrifugal Pump Pumpradial impeller Capacity5,0 m3/H (70m) With motor5,5 KW, 380-420/660-725 Volt (ATEX II 2 G Ex de IIC T4) Inletdia.40 mm Outletdia.25 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Year of construction2012 Mounted on framecheck Floorspace1,1x0,4 M Total height2,1 M Weight150 KGCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU201P050 MakeAPI Schmidt-Bretten GmbH & Co, KG TypeSIGMA K 52 SCL Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 Degr.C. Information Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...
General SKU213T166 MakeKSB TypeVAB050-040-1150302MDBQ72LE Mach.No.997339226800010001 Year of construction2016 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume6000 Ltr. Motor1.85 KW Specified Features - Centrifugal Pump Number of pumps:1 Capacity6 m³/h With motor1.85 kW (400 V, 1450 rpm (Ex)) Centrifugal Pumps MaterialStainless steel Information LocationBarneveld Floorspace0,4 x 0,6 m Total height0,5 m Weight100 kg CEcheck Extra SpecificationsH=25 mCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU290N374 MakeKoruma Maschinenbau Hauser kg LocationBarneveld TypeDH VI/180 EX Motor Motor power28 kiloWatt Main Features MaterialStainless steel Motor28 KW Inlet diameter90 mm Specified Features - Colloid mill Colloid mill in linecheck Rotor sizesø 180 mm Without hoppercheck Inletø 90mm Outletø 100mm Motor28 kW, 400 V (Ex), 2940 rpm Speed2490 rpm MaterialStainless steel Information No.3383 Year of construction1984 Mounted on framecheck Floorspace1,8 x 0,7 m Total height0,6 m Weight540 kg ATEX compatiblecheckColloid millsFryma KorumaMills > Colloid millsBrand > Fryma Koruma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...
General SKU285M313 LocationBarneveld MakeH. Telschig-Verfahrenstechnik GmbH TypeKSM-1 No.0406997 Main Features MaterialStainless steel Volume80 Ltr. Motor0.55 KW Specified Features - Tumbler mixer Continuous mixer/coater Capacity80 Ltr. Diameter290mm Cylindrical length1245mm Inletdia. 100mm Outlet135x135mm With motor0,55 KW, 230/400 Volt MaterialStainless steel Information Year of construction1997 With switchcheck Floorspace1,6x0,7 M Total height1,2 M Weight220 KGTumbler mixersTelschigMixers > Tumbler mixersBrand > Telschig What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU306M443 LocationBarneveld MakeKusters Venlo No.60193/3 Specified Features - Shredder MaterialMild steel, Stainless steel 1.4301 (304) Shreddercheck Double shaftcheck With hoppercheck Inlet600x400x240mm Outlet150x150mm Motor0,25kW, 230/400Volt, 1380rpm Information Year of construction2006 Mounted on legscheck With switchgearcheck Floorspace1.5x0.9m Total height2.1m Weight600kg Extra Specificationsblades are made of mild steelShreddersKusters VenloBreakers > ShreddersBrand > Kusters Venlo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0812 LocationBarneveld MakeKÜHNI (CH) TypeRhombopack Pressure Working pressure2 Bar Main Features Capacity6000 Ltr./Hr. Specified Features - Distillation Distillation installationRegeneration Column Capacity6300 ltr Column sizesdia. 800mm x12000mm Number of columns:(6 stages) Max. temperature200 degr.C MaterialStainless steel 1.4435 (316L) Information No.222154 Year of construction1985 Floorspace1,2x1,2 M Total height13,0 M Weight3000 KG Extra SpecificationsPacking RhombopackDistillationKuehniColumns > DistillationBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : SPI - Solder Paste Inspection Find more here - / Contact us at -
A Kematec MBK 1 AR clocked rotary bottle capper is available. On-site viewing is possible.
A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.
This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details.
Manufacturer: Kleemann Model: Mobicat MC 102 RH Year of Manufacture: 1999 Machine Type : Mobile Jaw Crusher Operating Hours : Approx. 17,000 hours (counter defective) The Mobicat MC 102 RH is one of the most widely used mobile crushing units in the Kleemann range, valued for its reliability, high throughput capacity, and ease of operation on quarry, recycling, and demolition sites. Find more here - / Contact us at -
pressure: 040 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x fre ...
A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.
Key data: 800 mm, 360 mm, 450 mm
Milling machine for horizontal and vertical use, speed range 22.4-1,000 rpm in 12 gear stages Rapid traverses for longitudinal, Qer, and vertical, drive power 5.5 KW Dimensions 2000 x 2650 x 1775 Weight 2500 kg Accessories: Various tools by arrangement, including green side cabinet
Used Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Condition: Good Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Speed: 6.800 Bph Model: KSB 4 L Number of cavities: 4 Compressor not included Chiller not included Preform feeder Preform tipper Formats: Diameter Max. 110mm Length Max. 340mm Volume Max. 2.5 litri 2 Formats included: 1000 ml e 500 ml Safety protections Code: W 101 More details: https://bottlingscout.com
Used Used Case Sealer Bortolin-Kemo: Year: 2000 Condition: Good Used Case Sealer Bortolin-Kemo Year: 2000 Speed: 8.000 bph Model: mara h.m Gluer nordson Safety protections. Code: C 32 More details: https://bottlingscout.com
Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: Good Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com
Used Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Year: 2000 Condition: Good Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Model: Blomax 4 Year: 2000 Speed: 4.500 BPH Type: Rotary Number of cavities: 4 (molds included) Air recovery system Safety protections Code: W 106 More details: https://bottlingscout.com
Used Used Case Sealer Bortolin-Kemo Mara H.M: Year: 2000 Condition: Good Used Case Sealer Bortolin-Kemo Mara H.M Year: 2000. Speed: 1.500 pz/ora. Model: mara h.m. Gluer hot glue. Safety protections Code: C 48 More details: https://bottlingscout.com
Used Used Complete PET Sidel-Krones 18.000 bph: Year: 2000 Condition: Good Used Complete PET Sidel-Krones 18.000 bph: Product: Still water Speed: 18,000 l/h 2 lt (? 92) Formats: 0.5 and 2 lt Preform tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling and capping monoblock composed of: SIDEL SBO 16 Series 2 blower Type: rotary Number of molds: 16 (molds not included) Complete set included for Alaska neck processing Air recovery system NO CHILLER SIDEL ALSIM filler Year of manufacture: 2002 Rotation direction: counterclockwise Number of valves/taps: 63 Filling type: gravity Valve type: mechanical Pressurized cabin with filters AROL capper Number of heads: 12 Pre-threaded plastic cap: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (we have the drawing) Distribution system: pick & place COMBI OVERHAULED IN LATE 2024 Cap elevator: Manufacturer: AROL Type: mechanica ...
Used Used Case Sealer Bortolin-Kemo MaraQ H.M: Year: 1998 Condition: Good Used Case Sealer Bortolin-Kemo MaraQ H.M Year: 1998 Speed: 21 Pz/min. Model: MARAQ H.M Type of closure: with glue Without gluer Safety protections Code: C 76 More details: https://bottlingscout.com
maximum number of results exceeded
please refine your search
