k und g used for sale

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.

Operating hours: 39521 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information.

General SKU422S1021 MakeFryma LocationBarneveld CEcheck TypeVME-400 / C Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor20 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316), Stainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity60 Ltr. - 400 Ltr. Vessel sizesdia. 1120x950 mm Dished bottomcheck With covercheck OutletDN25, DN40 With jacket49 Ltr. Max. temperature150 °C With anchor stirrercheck Motor3/4 kW 380 Volt (EX) Speed mixing shaft13/26 rpm. With homogenisercheck Motor20 kW: 968 rpm. Information No.F 93368 / M 15102 Year of construction1992 Floorspace2,9x1,5 m Total height4,3 m Weight3800 kg ATEX compatiblecheck Extra Specificationsvacuumpump Sihi LOH 25007Processing vesselsFryma Korum ...

This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine.

This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us.

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.

Number of spindles: 4 St. Working width: 15 - 230 mm Working height: 10 - 125 mm Feed speed: 6 - 24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information.

This KOVACO SP 50 DP was manufactured in 2015. It features a robust welding positioner with a table size of 1200x1800 mm and a capacity of 5000 kg. The stroke reaches up to 1200 mm, and it offers a tilt range of 0-90 degrees and full table rotation from 0-360 degrees. Consider the opportunity to buy this KOVACO SP 50 DP welding robot. Contact us for more information about this machine.

bore capacity in steel (diameter): 62 mm arm length: 350-1600 mm workpiece height max.: 1250 mm distance spindle nose and table: 350-1250 mm Boring depth max.: 315 mm machine table: 2400 x 1000 x 200 mm Turning speeds of the bor. spindle: 38 - 2000 U / min spindle taper: MT5 feed: 0,06 - 1,00 mm/U engine output: 4 kW stroke drive: 1,5 kW oil pump: 0,75 kW total power requirement: 6 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis KUKA KR 90 R3100 extra C-F-HP was manufactured in 2016, featuring a load capacity of 90 kg and a reach of 3100 mm. It includes the KRC 4 controller, enhancing its operational flexibility. Consider the opportunity to buy this KUKA KR 90 R3100 extra C-F-HP robot arm. Contact us for more information about this machine.

This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine.

General SKU332X715 MakeKörting Hannover Mach.No.210-4-32860-3 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Information Mounted on framecheck LocationBarneve ...

This 6-axis KUKA KR 6 R900 fivve was manufactured in 2014, featuring a maximum reach of 901.5 mm and a payload capacity of 6 kg. It operates efficiently with a cycle time of 155 cycles per minute and has been used for 18000 hours. Ideal for tasks requiring precision and speed in challenging environments, it maintains a protection rating of IP54. If you are looking to get high-quality robotic arm capabilities, consider the KUKA KR 6 R900 fivve machine we have for sale. Contact us for more information.

This 6-axis KUKA KR16-2 robot arm was manufactured in 2017. It features a payload capacity of 16 kg and a maximum reach of 1650 mm. Versatile mounting options include floor, inverted, or angled setups. Ideal for material handling, assembly, welding, and more. Weighs approximately 280 kg. Compatible with KUKA KR C2 or KR C3 series controllers. Contact us for more information about this machine.

This KUKA KR 240-2 2000 robot arm was manufactured in 2009. It features a robust 6-axis system capable of handling a maximum total load of 640 kg, with an arm length of 1100 mm. Ideal for complex automation tasks, this robot arm can be installed on floors or ceilings, enhancing versatility. A great opportunity to buy this KUKA KR 240-2 2000 robot arm. Contact us for further details regarding this robot arm.

This KUKA KR140-3 COMP was manufactured in 2012. It includes a KR C2ed05 controller, enhancing its functionality. Primarily used as part of a cutting system, this robot arm comes with a control panel but without the robot head. Ideal for projects requiring robust automation support. Contact us for more information about this machine.

liter capacity: l total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis KUKA KR8 R2100-2 arc HW was manufactured in 2019. Ideal for precise and efficient automation tasks, this welding robot is a robust option for industries requiring high reliability and performance. Consider the opportunity to buy this KUKA KR8 R2100-2 arc HW welding robot. Contact us for more information.

grinding diameter: mm grinding length: mm max. module: 0 min. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This KUKA KR-90 R3100 was manufactured in 2016. It includes a floor bracket, control, and an ENGEL CC300 control cabinet – easix. With 3871 operational hours, it has been maintained by Engel. Dimensions for the robot are 2100 x 1000 x 2150mm, and the control cabinet measures 800 x 600 x 1300mm. It weighs 1092 Kg and can handle loads up to 90 Kg with a range of 3096 mm. Contact us for more information about this machine.

This 6-axis KUKA KR 6 R1820 Robot was manufactured in 2019. It excels with a maximum reach of 1820 mm and a rated payload of 6 kg. Versatile mounting options include ceiling, floor, wall, and desired angle. Both the robot and in-line wrist are protected with an IP54 rating. Ideal for tasks requiring flexibility and precision. For the KUKA KR 6 R1820 machine we have for sale, reach out for more information.

grinding diameter: mm grinding length: mm max. module: 0 min. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: l total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8935 Type: AX 80-380 Producer: Krauss Maffei Created: 2011 Parameters: Control System: MC5 4.5 Clamping force: 80 t Screw diameter: 30 mm

Saw blade diameter: 350 x 2,5 x 32 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm Motor output: 1,8 kW machine weight ab.: 500 kg dimensions: 1200 x 800 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU345S748 MakeKSB TypeCPKW-C 50-160 Mach.No.2-N37-533630 Year of construction1996 Main Features MaterialStainless steel Volume50000 Ltr. Motor11 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity50 m³/h With motor11 kW 400/690 Volt (Ex) MakeFlender ATB-Loher TypeDNGW-160MB-02A InletDN 80 OutletDN 50 Information Mounted on framecheck LocationBarneveld Floorspace1,3x0,5 m Total height0,7 m Weight400 kg ATEX compatiblecheckCentrifugal PumpsKSBPumps > Centrifugal PumpsBrand > KSB What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information.

Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C

This KUNZMANN WF4/3 universal milling machine was manufactured in 1998. It features a clamping surface of 650 x 350 mm, a maximum load capacity of 250 kg, and a tool holder SK40. Speed ranges from 40 to 2500 rpm with a quill stroke of 60 mm. The machine includes a control cabinet and weighs approximately 1300 kg. Ideal for precise milling applications. Reach out for more information about this machine.

This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine.

This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for sale.Contact us for more information.

This HOMAG KF62/6/A/25 was manufactured in 1986. It includes an infeed roller conveyor and two double-sided edge banding machines, enhancing productivity with efficient transitions via rotary devices. Ideal for streamlined edge banding operations. Contact us for more information about this machine.

This WOLF KGW 160 was manufactured in 2001. It is an extraction system designed to handle large air volumes, with a supply air capacity of 10,000 m3/h and exhaust air at 9,500 m3/h. Powered by an 11 kW motor, it efficiently manages air flow and pressure. Consider the opportunity to buy this WOLF KGW 160 extraction system. Contact us for more information about this machine.

This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information.

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.

A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200 ...

Milling machine TOS KURIM FRO 6, FRO8

Rotary table press for the production of single-layer concrete panels with 5 stations Pressing force: 900 tons

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)

Complete plant for the production of sand-lime bricks - Autonomous production plant with 6 employees - The plant is designed for a production of 50,000 tons /year - Pipe material round stone, aggregate size 32-50 mm - Crushing from 16-50 to 0-3 mm - Primary crusher/fine crusher/harp sieve/filler mill - Extinguishing in reactors 1&2 - Pressing: the press presses at 120 bar - Hardening boiler steam plant/so-called autoclaves = total 6 pcs. + 1 reserve - Residual steam is reused or discharged to the other halls - Packaging system: Fully automatic

Key data: 650 mm, 140 , 35

Screw diameter: 35 mm Displacement: 154 cm³ Injection weight in polystyrene: 140 g/hp Injection pressure: 2,429 bar Clamping force: 65 t Tool installation height min.: 250 mm Opening distance: 500 mm CONTROL: MC6 Screen text: german / german Operating instructions: german / german Core cables: 1 Pump drive power: 15kW Total connected load: 32.0 kW Total weight: 3,900 kg Dimensions L x W x H: 4.0 x 1.6 x 2.1 m Payment terms: 100% before taking over the machine, net only

Key data: 1600 mm, 228 , 40

Screw diameter: 40 mm Stroke volume: 251 cm³ Injection weight in polystyrene: 228 g/hp Injection pressure: 2,500 bar Clamping force: 160 t Tool installation height min.: 300 mm Opening distance: 650 mm CONTROL: MC5 Screen text: german / german Operating instructions: german / german Core pulls: 2 incl. LRX100 robot integrated, x-550mm, y-1.200mm, z-1.500mm, c-90°, 2xGripper, 2xvacuum Pump drive power: 22kW Total connected load: 37.7 kW Total weight: 8,200 kg Dimensions L x W x H: 5.0 x 1.7 x 2.2 m Payment terms: 100 % before taking over the machine, net only

An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.

I am selling an autoclave Korimat KA 380 Programmable control with the ability to record temperatures 1 basket for inserting products Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Price negotiable.

feed pressure: 12 bar total power requirement: 22 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.